[v1,03/26] thermal/core/governors: Use thermal_zone_get_trip() instead of ops functions

Message ID	20220805145729.2491611-4-daniel.lezcano@linaro.org
State	Superseded
Headers	show Return-Path: <linux-pm-owner@kernel.org> From: Daniel Lezcano <daniel.lezcano@linaro.org> To: daniel.lezcano@linaro.org, rafael@kernel.org Cc: rui.zhang@intel.com, linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org, Amit Kucheria <amitk@kernel.org>, Lukasz Luba <lukasz.luba@arm.com> Subject: [PATCH v1 03/26] thermal/core/governors: Use thermal_zone_get_trip() instead of ops functions Date: Fri, 5 Aug 2022 16:57:06 +0200 Message-Id: <20220805145729.2491611-4-daniel.lezcano@linaro.org> In-Reply-To: <20220805145729.2491611-1-daniel.lezcano@linaro.org> References: <20220805145729.2491611-1-daniel.lezcano@linaro.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	Rework the trip points creation \| expand [v1,00/26] Rework the trip points creation [v1,01/26] thermal/core: encapsulate ops->get_trip_* ops into a function [v1,02/26] thermal/sysfs: Do not make get_trip_hyst optional [v1,03/26] thermal/core/governors: Use thermal_zone_get_trip() instead of ops functions [v1,04/26] thermal/drivers/st: Use generic trip points [v1,05/26] thermal/drivers/tegra: Use generic thermal_zone_get_trip() function [v1,06/26] thermal/drivers/imx: Use generic thermal_zone_get_trip() function [v1,07/26] thermal/drivers/exynos: Use generic thermal_zone_get_trip() function [v1,08/26] thermal/drivers/rcar: Use generic thermal_zone_get_trip() function [v1,09/26] thermal/drivers/uniphier: Use generic thermal_zone_get_trip() function [v1,10/26] thermal/drivers/hisi: Use generic thermal_zone_get_trip() function [v1,11/26] thermal/drivers/qcom: Use generic thermal_zone_get_trip() function [v1,12/26] thermal/drivers/OF: Use generic thermal_zone_get_trip() function [v1,13/26] thermal/drivers/armada: Use generic thermal_zone_get_trip() function [v1,14/26] thermal/core/OF: Remove unused functions [v1,15/26] thermal/drivers/rcar_gen3: Use the generic function to get the number of trips [v1,16/26] thermal/drivers/exynos: of_thermal_get_ntrips() [v1,17/26] thermal/core/of: Remove of_thermal_get_ntrips() [v1,18/26] thermal/drivers/exynos: Replace of_thermal_is_trip_valid() by thermal_zone_get_trip() [v1,19/26] thermal/core/of: Remove of_thermal_is_trip_valid() [v1,20/26] thermal/drivers/broadcom: Use generic thermal_zone_get_trip() function [v1,21/26] thermal/drivers/da9062: Use generic thermal_zone_get_trip() function [v1,22/26] thermal/drivers/ti: Remove unused macros ti_thermal_get_trip_value() / ti_thermal_trip... [v1,23/26] thermal/drivers/acerhdf: Use generic thermal_zone_get_trip() function [v1,24/26] thermal/drivers/cxgb4: Use generic thermal_zone_get_trip() function [v1,25/26] thermal/intel/int340x: Replace parameter to simplify [v1,26/26] thermal/drivers/intel: Use generic thermal_zone_get_trip() function

diff --git a/drivers/thermal/gov_bang_bang.c b/drivers/thermal/gov_bang_bang.c index 991a1c54296d..de59ea9e2f7b 100644 --- a/drivers/thermal/gov_bang_bang.c +++ b/drivers/thermal/gov_bang_bang.c @@ -13,28 +13,21 @@ #include "thermal_core.h" -static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip) +static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip_id) { - int trip_temp, trip_hyst; + struct thermal_trip trip; struct thermal_instance *instance; - tz->ops->get_trip_temp(tz, trip, &trip_temp); - - if (!tz->ops->get_trip_hyst) { - pr_warn_once("Undefined get_trip_hyst for thermal zone %s - " - "running with default hysteresis zero\n", tz->type); - trip_hyst = 0; - } else - tz->ops->get_trip_hyst(tz, trip, &trip_hyst); + thermal_zone_get_trip(tz, trip_id, &trip); dev_dbg(&tz->device, "Trip%d[temp=%d]:temp=%d:hyst=%d\n", - trip, trip_temp, tz->temperature, - trip_hyst); + trip_id, trip.temperature, tz->temperature, + trip.hysteresis); mutex_lock(&tz->lock); list_for_each_entry(instance, &tz->thermal_instances, tz_node) { - if (instance->trip != trip) + if (instance->trip != trip_id) continue; /* in case fan is in initial state, switch the fan off */ @@ -52,10 +45,10 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip) * enable fan when temperature exceeds trip_temp and disable * the fan in case it falls below trip_temp minus hysteresis */ - if (instance->target == 0 && tz->temperature >= trip_temp) + if (instance->target == 0 && tz->temperature >= trip.temperature) instance->target = 1; else if (instance->target == 1 && - tz->temperature <= trip_temp - trip_hyst) + tz->temperature <= trip.temperature - trip.hysteresis) instance->target = 0; dev_dbg(&instance->cdev->device, "target=%d\n", diff --git a/drivers/thermal/gov_fair_share.c b/drivers/thermal/gov_fair_share.c index 6a2abcfc648f..877d52605871 100644 --- a/drivers/thermal/gov_fair_share.c +++ b/drivers/thermal/gov_fair_share.c @@ -21,16 +21,12 @@ */ static int get_trip_level(struct thermal_zone_device *tz) { - int count = 0; - int trip_temp; - enum thermal_trip_type trip_type; - - if (tz->num_trips == 0 || !tz->ops->get_trip_temp) - return 0; + struct thermal_trip trip; + int count; for (count = 0; count < tz->num_trips; count++) { - tz->ops->get_trip_temp(tz, count, &trip_temp); - if (tz->temperature < trip_temp) + thermal_zone_get_trip(tz, count, &trip); + if (tz->temperature < trip.temperature) break; } @@ -38,10 +34,8 @@ static int get_trip_level(struct thermal_zone_device *tz) * count > 0 only if temperature is greater than first trip * point, in which case, trip_point = count - 1 */ - if (count > 0) { - tz->ops->get_trip_type(tz, count - 1, &trip_type); - trace_thermal_zone_trip(tz, count - 1, trip_type); - } + if (count > 0) + trace_thermal_zone_trip(tz, count - 1, trip.type); return count; } diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c index 1d5052470967..54ba05d532db 100644 --- a/drivers/thermal/gov_power_allocator.c +++ b/drivers/thermal/gov_power_allocator.c @@ -125,16 +125,15 @@ static void estimate_pid_constants(struct thermal_zone_device *tz, u32 sustainable_power, int trip_switch_on, int control_temp) { + struct thermal_trip trip; + u32 temperature_threshold = control_temp; int ret; - int switch_on_temp; - u32 temperature_threshold; s32 k_i; - ret = tz->ops->get_trip_temp(tz, trip_switch_on, &switch_on_temp); - if (ret) - switch_on_temp = 0; + ret = thermal_zone_get_trip(tz, trip_switch_on, &trip); + if (!ret) + temperature_threshold -= trip.temperature; - temperature_threshold = control_temp - switch_on_temp; /* * estimate_pid_constants() tries to find appropriate default * values for thermal zones that don't provide them. If a @@ -528,10 +527,10 @@ static void get_governor_trips(struct thermal_zone_device *tz, last_passive = INVALID_TRIP; for (i = 0; i < tz->num_trips; i++) { - enum thermal_trip_type type; + struct thermal_trip trip; int ret; - ret = tz->ops->get_trip_type(tz, i, &type); + ret = thermal_zone_get_trip(tz, i, &trip); if (ret) { dev_warn(&tz->device, "Failed to get trip point %d type: %d\n", i, @@ -539,14 +538,14 @@ static void get_governor_trips(struct thermal_zone_device *tz, continue; } - if (type == THERMAL_TRIP_PASSIVE) { + if (trip.type == THERMAL_TRIP_PASSIVE) { if (!found_first_passive) { params->trip_switch_on = i; found_first_passive = true; } else { last_passive = i; } - } else if (type == THERMAL_TRIP_ACTIVE) { + } else if (trip.type == THERMAL_TRIP_ACTIVE) { last_active = i; } else { break; @@ -643,7 +642,7 @@ static int power_allocator_bind(struct thermal_zone_device *tz) { int ret; struct power_allocator_params *params; - int control_temp; + struct thermal_trip trip; ret = check_power_actors(tz); if (ret) @@ -669,13 +668,12 @@ static int power_allocator_bind(struct thermal_zone_device *tz) get_governor_trips(tz, params); if (tz->num_trips > 0) { - ret = tz->ops->get_trip_temp(tz, - params->trip_max_desired_temperature, - &control_temp); + ret = thermal_zone_get_trip(tz, params->trip_max_desired_temperature, + &trip); if (!ret) estimate_pid_constants(tz, tz->tzp->sustainable_power, params->trip_switch_on, - control_temp); + trip.temperature); } reset_pid_controller(params); @@ -705,24 +703,23 @@ static void power_allocator_unbind(struct thermal_zone_device *tz) tz->governor_data = NULL; } -static int power_allocator_throttle(struct thermal_zone_device *tz, int trip) +static int power_allocator_throttle(struct thermal_zone_device *tz, int trip_id) { - int ret; - int switch_on_temp, control_temp; struct power_allocator_params *params = tz->governor_data; + struct thermal_trip trip; + int ret; bool update; /* * We get called for every trip point but we only need to do * our calculations once */ - if (trip != params->trip_max_desired_temperature) + if (trip_id != params->trip_max_desired_temperature) return 0; - ret = tz->ops->get_trip_temp(tz, params->trip_switch_on, - &switch_on_temp); - if (!ret && (tz->temperature < switch_on_temp)) { - update = (tz->last_temperature >= switch_on_temp); + ret = thermal_zone_get_trip(tz, params->trip_switch_on, &trip); + if (!ret && (tz->temperature < trip.temperature)) { + update = (tz->last_temperature >= trip.temperature); tz->passive = 0; reset_pid_controller(params); allow_maximum_power(tz, update); @@ -731,16 +728,14 @@ static int power_allocator_throttle(struct thermal_zone_device *tz, int trip) tz->passive = 1; - ret = tz->ops->get_trip_temp(tz, params->trip_max_desired_temperature, - &control_temp); + ret = thermal_zone_get_trip(tz, params->trip_max_desired_temperature, &trip); if (ret) { - dev_warn(&tz->device, - "Failed to get the maximum desired temperature: %d\n", + dev_warn(&tz->device, "Failed to get the maximum desired temperature: %d\n", ret); return ret; } - return allocate_power(tz, control_temp); + return allocate_power(tz, trip.temperature); } static struct thermal_governor thermal_gov_power_allocator = { diff --git a/drivers/thermal/gov_step_wise.c b/drivers/thermal/gov_step_wise.c index 9729b46d0258..886016c7cd3d 100644 --- a/drivers/thermal/gov_step_wise.c +++ b/drivers/thermal/gov_step_wise.c @@ -95,32 +95,30 @@ static void update_passive_instance(struct thermal_zone_device *tz, tz->passive += value; } -static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip) +static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip_id) { - int trip_temp; - enum thermal_trip_type trip_type; enum thermal_trend trend; struct thermal_instance *instance; + struct thermal_trip trip; bool throttle = false; int old_target; - tz->ops->get_trip_temp(tz, trip, &trip_temp); - tz->ops->get_trip_type(tz, trip, &trip_type); + thermal_zone_get_trip(tz, trip_id, &trip); - trend = get_tz_trend(tz, trip); + trend = get_tz_trend(tz, trip_id); - if (tz->temperature >= trip_temp) { + if (tz->temperature >= trip.temperature) { throttle = true; - trace_thermal_zone_trip(tz, trip, trip_type); + trace_thermal_zone_trip(tz, trip_id, trip.type); } dev_dbg(&tz->device, "Trip%d[type=%d,temp=%d]:trend=%d,throttle=%d\n", - trip, trip_type, trip_temp, trend, throttle); + trip_id, trip.type, trip.temperature, trend, throttle); mutex_lock(&tz->lock); list_for_each_entry(instance, &tz->thermal_instances, tz_node) { - if (instance->trip != trip) + if (instance->trip != trip_id) continue; old_target = instance->target; @@ -134,11 +132,11 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip) /* Activate a passive thermal instance */ if (old_target == THERMAL_NO_TARGET && instance->target != THERMAL_NO_TARGET) - update_passive_instance(tz, trip_type, 1); + update_passive_instance(tz, trip.type, 1); /* Deactivate a passive thermal instance */ else if (old_target != THERMAL_NO_TARGET && instance->target == THERMAL_NO_TARGET) - update_passive_instance(tz, trip_type, -1); + update_passive_instance(tz, trip.type, -1); instance->initialized = true; mutex_lock(&instance->cdev->lock);

[v1,03/26] thermal/core/governors: Use thermal_zone_get_trip() instead of ops functions

Commit Message

Patch