diff mbox series

[v3,1/3] dt-bindings: gpio: Add imx scu gpio driver bindings

Message ID 20220810133005.74653-2-shenwei.wang@nxp.com
State Superseded
Headers show
Series Add IMX8 SCU GPIO support | expand

Commit Message

Shenwei Wang Aug. 10, 2022, 1:30 p.m. UTC
Add binding document for the imx scu gpio driver.

Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
---
 .../bindings/gpio/fsl,imx-sc-gpio.yaml        | 40 +++++++++++++++++++
 1 file changed, 40 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/fsl,imx-sc-gpio.yaml

Comments

Krzysztof Kozlowski Aug. 10, 2022, 2:46 p.m. UTC | #1
On 10/08/2022 16:30, Shenwei Wang wrote:
> Add binding document for the imx scu gpio driver.
> 
> Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
> ---
>  .../bindings/gpio/fsl,imx-sc-gpio.yaml        | 40 +++++++++++++++++++
>  1 file changed, 40 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/fsl,imx-sc-gpio.yaml
> 
> diff --git a/Documentation/devicetree/bindings/gpio/fsl,imx-sc-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl,imx-sc-gpio.yaml
> new file mode 100644
> index 000000000000..66abff316c0c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/fsl,imx-sc-gpio.yaml
> @@ -0,0 +1,40 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/gpio/fsl,imx-sc-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: GPIO driver over IMX SCU firmware API
> +
> +maintainers:
> +  - Shenwei Wang <shenwei.wang@nxp.com>
> +
> +description: |
> +  This module provides the standard interface to control the
> +  resource pins in SCU domain on i.MX8 platforms.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - fsl,imx8qxp-sc-gpio
> +      - fsl,imx-scu-gpio


This is too generic compatible and it even conflicts with the above...
Your driver binds to both without driver data which is even more
confusing. Make the compatible specific for one, given SoC.


Best regards,
Krzysztof
Krzysztof Kozlowski Aug. 10, 2022, 3:45 p.m. UTC | #2
On 10/08/2022 18:23, Shenwei Wang wrote:
> 
> 
>> -----Original Message-----
>> From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> Sent: Wednesday, August 10, 2022 9:46 AM
>> To: Shenwei Wang <shenwei.wang@nxp.com>; robh+dt@kernel.org;
>> krzysztof.kozlowski+dt@linaro.org; linus.walleij@linaro.org; brgl@bgdev.pl;
>> shawnguo@kernel.org; s.hauer@pengutronix.de; kernel@pengutronix.de;
>> festevam@gmail.com; dl-linux-imx <linux-imx@nxp.com>
>> Cc: devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux-
>> gpio@vger.kernel.org; linux-arm-kernel@lists.infradead.org; imx@lists.linux.dev
>> Subject: [EXT] Re: [PATCH v3 1/3] dt-bindings: gpio: Add imx scu gpio driver
>> bindings
>>
>> Caution: EXT Email
>>
>> On 10/08/2022 16:30, Shenwei Wang wrote:
>>> Add binding document for the imx scu gpio driver.
>>>
>>> Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
>>> ---
>>>  .../bindings/gpio/fsl,imx-sc-gpio.yaml        | 40 +++++++++++++++++++
>>> +properties:
>>> +  compatible:
>>> +    enum:
>>> +      - fsl,imx8qxp-sc-gpio
>>> +      - fsl,imx-scu-gpio
>>
>>
>> This is too generic compatible and it even conflicts with the above...
>> Your driver binds to both without driver data which is even more confusing.
>> Make the compatible specific for one, given SoC.
>>
> 
> Oh, that's my bad. It is a typo. The generic compatible should be "fsl,imx-sc-gpio".  
> So far there is no driver data required for both imx8qxp and imx8dxl, but it might be
> required sometimes later in case the scu firmware is customized for a specified use case.
> That's why I put the generic one here.

That's not a proper reason to add generic one. Either all
implementations are compatible or not. If you are unsure, this should be
assumed as not and just use specific compatible. If you are 100% sure,
then use fallback, not two compatibles, and properly justify it.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/gpio/fsl,imx-sc-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl,imx-sc-gpio.yaml
new file mode 100644
index 000000000000..66abff316c0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/fsl,imx-sc-gpio.yaml
@@ -0,0 +1,40 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/fsl,imx-sc-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO driver over IMX SCU firmware API
+
+maintainers:
+  - Shenwei Wang <shenwei.wang@nxp.com>
+
+description: |
+  This module provides the standard interface to control the
+  resource pins in SCU domain on i.MX8 platforms.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qxp-sc-gpio
+      - fsl,imx-scu-gpio
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio0: gpio {
+        compatible = "fsl,imx8qxp-sc-gpio";
+        gpio-controller;
+        #gpio-cells = <2>;
+    };