diff mbox series

[4/5] clk: at91: sama5d2: Add Generic Clocks for UART/USART

Message ID 20220817075517.49575-5-sergiu.moga@microchip.com
State Superseded
Headers show
Series Make atmel serial driver aware of GCLK | expand

Commit Message

Sergiu Moga Aug. 17, 2022, 7:55 a.m. UTC
Add the generic clocks for UART/USART in the sama5d2 driver to allow them
to be registered in the Common Clock Framework.

Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
---
 drivers/clk/at91/sama5d2.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Stephen Boyd Aug. 30, 2022, 10:23 p.m. UTC | #1
Quoting Sergiu Moga (2022-08-17 00:55:17)
> Add the generic clocks for UART/USART in the sama5d2 driver to allow them
> to be registered in the Common Clock Framework.
> 
> Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
> ---

Should I pick this up to clk-next or did you want to take it via another
tree?
Claudiu Beznea Aug. 31, 2022, 2:47 p.m. UTC | #2
On 31.08.2022 01:23, Stephen Boyd wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> Quoting Sergiu Moga (2022-08-17 00:55:17)
>> Add the generic clocks for UART/USART in the sama5d2 driver to allow them
>> to be registered in the Common Clock Framework.
>>
>> Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
>> ---
> 
> Should I pick this up to clk-next or did you want to take it via another
> tree?

For me it's OK if it goes though clk-next.

Thank you,
Claudiu Beznea
diff mbox series

Patch

diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c
index cfd0f5e23b99..84156dc52bff 100644
--- a/drivers/clk/at91/sama5d2.c
+++ b/drivers/clk/at91/sama5d2.c
@@ -120,6 +120,16 @@  static const struct {
 	struct clk_range r;
 	int chg_pid;
 } sama5d2_gck[] = {
+	{ .n = "flx0_gclk",   .id = 19, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "flx1_gclk",   .id = 20, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "flx2_gclk",   .id = 21, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "flx3_gclk",   .id = 22, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "flx4_gclk",   .id = 23, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "uart0_gclk",  .id = 24, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "uart1_gclk",  .id = 25, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "uart2_gclk",  .id = 26, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "uart3_gclk",  .id = 27, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "uart4_gclk",  .id = 28, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
 	{ .n = "sdmmc0_gclk", .id = 31, .chg_pid = INT_MIN, },
 	{ .n = "sdmmc1_gclk", .id = 32, .chg_pid = INT_MIN, },
 	{ .n = "tcb0_gclk",   .id = 35, .chg_pid = INT_MIN, .r = { .min = 0, .max = 83000000 }, },