diff mbox series

dt-bindings: mfd: qcom,spmi-pmic: extend example

Message ID 20220828130113.5845-1-krzysztof.kozlowski@linaro.org
State Accepted
Commit 6f42a14bc20618c13ffe26d01fffb162b4a01cb1
Headers show
Series dt-bindings: mfd: qcom,spmi-pmic: extend example | expand

Commit Message

Krzysztof Kozlowski Aug. 28, 2022, 1:01 p.m. UTC 
Add a more complete example with PM6150 to provide better validation of
the bindings.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/mfd/qcom,spmi-pmic.yaml          | 84 +++++++++++++++++++
 1 file changed, 84 insertions(+)

Comments

Stephen Boyd Aug. 29, 2022, 10:21 p.m. UTC | #1 
Quoting Krzysztof Kozlowski (2022-08-28 06:01:13)
> Add a more complete example with PM6150 to provide better validation of
> the bindings.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---

Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Rob Herring Aug. 30, 2022, 4:27 p.m. UTC | #2 
On Sun, 28 Aug 2022 16:01:13 +0300, Krzysztof Kozlowski wrote:
> Add a more complete example with PM6150 to provide better validation of
> the bindings.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../bindings/mfd/qcom,spmi-pmic.yaml          | 84 +++++++++++++++++++
>  1 file changed, 84 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>
Lee Jones Sept. 5, 2022, 2:44 p.m. UTC | #3 
On Sun, 28 Aug 2022, Krzysztof Kozlowski wrote:

> Add a more complete example with PM6150 to provide better validation of
> the bindings.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../bindings/mfd/qcom,spmi-pmic.yaml          | 84 +++++++++++++++++++
>  1 file changed, 84 insertions(+)

Applied, thanks.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
index 230f3bf9c1ea..9676a9e3d176 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
@@ -208,3 +208,87 @@  examples:
             };
         };
     };
+
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/iio/qcom,spmi-vadc.h>
+    #include <dt-bindings/spmi/spmi.h>
+
+    pmic@0 {
+        compatible = "qcom,pm6150", "qcom,spmi-pmic";
+        reg = <0x0 SPMI_USID>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pon@800 {
+            compatible = "qcom,pm8998-pon";
+            reg = <0x800>;
+            mode-bootloader = <0x2>;
+            mode-recovery = <0x1>;
+
+            pwrkey {
+                compatible = "qcom,pm8941-pwrkey";
+                interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+                debounce = <15625>;
+                bias-pull-up;
+                linux,code = <KEY_POWER>;
+            };
+        };
+
+        temp-alarm@2400 {
+            compatible = "qcom,spmi-temp-alarm";
+            reg = <0x2400>;
+            interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+            io-channels = <&pm6150_adc ADC5_DIE_TEMP>;
+            io-channel-names = "thermal";
+            #thermal-sensor-cells = <0>;
+        };
+
+        pm6150_adc: adc@3100 {
+            compatible = "qcom,spmi-adc5";
+            reg = <0x3100>;
+            interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            adc-chan@6 {
+                reg = <ADC5_DIE_TEMP>;
+                label = "die_temp";
+            };
+
+            adc-chan@4f {
+                reg = <ADC5_AMUX_THM3_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+            };
+        };
+
+        adc-tm@3500 {
+            compatible = "qcom,spmi-adc-tm5";
+            reg = <0x3500>;
+            interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+            #thermal-sensor-cells = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            charger-thermistor@0 {
+                reg = <0>;
+                io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time-us = <200>;
+            };
+        };
+
+        pm6150_gpio: gpios@c000 {
+            compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
+            reg = <0xc000>;
+            gpio-controller;
+            gpio-ranges = <&pm6150_gpio 0 0 10>;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };