diff mbox series

[v3,3/3] powerpc: dts: turris1x.dts: Set lower priority for CPLD syscon-reboot

Message ID 20220831081715.14673-3-pali@kernel.org
State Superseded
Headers show
Series [v3,1/3] dt-bindings: reset: syscon-reboot: Add priority property | expand

Commit Message

Pali Rohár Aug. 31, 2022, 8:17 a.m. UTC
Due to CPLD firmware bugs, set CPLD syscon-reboot priority level to 64
(between rstcr and watchdog) to ensure that rstcr's global-utilities reset
method which is preferred stay as default one, and to ensure that CPLD
syscon-reboot is more preferred than watchdog reset method.

Fixes: 0531a4abd1c6 ("powerpc: dts: turris1x.dts: Add CPLD reboot node")
Signed-off-by: Pali Rohár <pali@kernel.org>
---
 arch/powerpc/boot/dts/turris1x.dts | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
diff mbox series

Patch

diff --git a/arch/powerpc/boot/dts/turris1x.dts b/arch/powerpc/boot/dts/turris1x.dts
index 69c38ed8a3a5..c189293d5a1e 100644
--- a/arch/powerpc/boot/dts/turris1x.dts
+++ b/arch/powerpc/boot/dts/turris1x.dts
@@ -353,11 +353,34 @@ 
 			};
 
 			reboot@d {
+				/*
+				 * CPLD firmware which manages system reset and
+				 * watchdog registers has bugs. It does not
+				 * autoclear system reset register after change
+				 * and watchdog ignores reset line on immediate
+				 * succeeding reset cycle triggered by watchdog.
+				 * These bugs have to be workarounded in U-Boot
+				 * bootloader. So use system reset via syscon as
+				 * a last resort because older U-Boot versions
+				 * do not have workaround for watchdog.
+				 *
+				 * Reset method via rstcr's global-utilities
+				 * (the preferred one) has priority level 128,
+				 * watchdog has priority level 0 and default
+				 * syscon-reboot priority level is 192.
+				 *
+				 * So define syscon-reboot with custom priority
+				 * level 64 (between rstcr and watchdog) because
+				 * rstcr should stay as default preferred reset
+				 * method and reset via watchdog is more broken
+				 * than system reset via syscon.
+				 */
 				compatible = "syscon-reboot";
 				reg = <0x0d 0x01>;
 				offset = <0x0d>;
 				mask = <0x01>;
 				value = <0x01>;
+				priority = <64>;
 			};
 
 			led-controller@13 {