| Message ID | 20220901072414.1923075-7-iskren.chernev@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add support for sm6115,4250 and OnePlus Nord N100 | expand |
On 01/09/2022 10:24, Iskren Chernev wrote: > Add support for the USB controller and its HS PHY to SM6115. > > Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> > --- > arch/arm64/boot/dts/qcom/sm6115.dtsi | 62 ++++++++++++++++++++++++++++ > 1 file changed, 62 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi > index a6be8b93a44d..00fd185c87aa 100644 > --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi > @@ -412,6 +412,21 @@ gcc: clock-controller@1400000 { > #power-domain-cells = <1>; > }; > > + hsusb_phy: phy@1613000 { > + compatible = "qcom,sm6115-qusb2-phy"; > + reg = <0x1613000 0x180>; > + #phy-cells = <0>; > + > + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, > + <&gcc GCC_AHB2PHY_USB_CLK>; > + clock-names = "ref", "cfg_ahb"; > + > + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; > + nvmem-cells = <&qusb2_hstx_trim>; > + > + status = "disabled"; > + }; > + > qfprom@1b40000 { > compatible = "qcom,qfprom"; > reg = <0x1b40000 0x7000>; > @@ -434,6 +449,53 @@ rpm_msg_ram: memory@45f0000 { > reg = <0x45f0000 0x7000>; > }; > > + usb3: usb@4ef8800 { > + compatible = "qcom,sm6115-dwc3", "qcom,dwc3"; > + reg = <0x04ef8800 0x400>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, > + <&gcc GCC_USB30_PRIM_MASTER_CLK>, > + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, > + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, > + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, > + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; > + clock-names = "cfg_noc", "core", "iface", "mock_utmi", > + "sleep", "xo"; > + > + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, > + <&gcc GCC_USB30_PRIM_MASTER_CLK>; > + assigned-clock-rates = <19200000>, <66666667>; > + > + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "hs_phy_irq", "ss_phy_irq"; > + > + resets = <&gcc GCC_USB30_PRIM_BCR>; > + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; > + qcom,select-utmi-as-pipe-clk; > + status = "disabled"; > + > + usb3_dwc3: dwc3@4e00000 { Node name: usb Does not look like you tested the DTS against bindings. Please run `make dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst for instructions). Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index a6be8b93a44d..00fd185c87aa 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -412,6 +412,21 @@ gcc: clock-controller@1400000 { #power-domain-cells = <1>; }; + hsusb_phy: phy@1613000 { + compatible = "qcom,sm6115-qusb2-phy"; + reg = <0x1613000 0x180>; + #phy-cells = <0>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_AHB2PHY_USB_CLK>; + clock-names = "ref", "cfg_ahb"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + + status = "disabled"; + }; + qfprom@1b40000 { compatible = "qcom,qfprom"; reg = <0x1b40000 0x7000>; @@ -434,6 +449,53 @@ rpm_msg_ram: memory@45f0000 { reg = <0x45f0000 0x7000>; }; + usb3: usb@4ef8800 { + compatible = "qcom,sm6115-dwc3", "qcom,dwc3"; + reg = <0x04ef8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep", "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <66666667>; + + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + qcom,select-utmi-as-pipe-clk; + status = "disabled"; + + usb3_dwc3: dwc3@4e00000 { + compatible = "snps,dwc3"; + reg = <0x04e00000 0xcd00>; + interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + phys = <&hsusb_phy>; + phy-names = "usb2-phy"; + iommus = <&apps_smmu 0x120 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + snps,usb3_lpm_capable; + imod-interval-ns = <160>; + maximum-speed = "high-speed"; + dr_mode = "peripheral"; + }; + }; + apps_smmu: iommu@c600000 { compatible = "qcom,sm6115-smmu-500", "arm,mmu-500"; reg = <0xc600000 0x80000>;
Add support for the USB controller and its HS PHY to SM6115. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> --- arch/arm64/boot/dts/qcom/sm6115.dtsi | 62 ++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+)