@@ -10,7 +10,6 @@
*/
#include <linux/clk.h>
#include <linux/delay.h>
-#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
@@ -30,7 +29,6 @@
#include <media/v4l2-image-sizes.h>
#include <media/v4l2-subdev.h>
#include <media/v4l2-mediabus.h>
-#include <media/i2c/ov9650.h>
static int debug;
module_param(debug, int, 0644);
@@ -1402,38 +1400,6 @@ static const struct v4l2_subdev_ops ov965x_subdev_ops = {
.video = &ov965x_video_ops,
};
-/*
- * Reset and power down GPIOs configuration
- */
-static int ov965x_configure_gpios_pdata(struct ov965x *ov965x,
- const struct ov9650_platform_data *pdata)
-{
- int ret, i;
- int gpios[NUM_GPIOS];
- struct device *dev = regmap_get_device(ov965x->regmap);
-
- gpios[GPIO_PWDN] = pdata->gpio_pwdn;
- gpios[GPIO_RST] = pdata->gpio_reset;
-
- for (i = 0; i < ARRAY_SIZE(ov965x->gpios); i++) {
- int gpio = gpios[i];
-
- if (!gpio_is_valid(gpio))
- continue;
- ret = devm_gpio_request_one(dev, gpio,
- GPIOF_OUT_INIT_HIGH, "OV965X");
- if (ret < 0)
- return ret;
- v4l2_dbg(1, debug, &ov965x->sd, "set gpio %d to 1\n", gpio);
-
- gpio_set_value_cansleep(gpio, 1);
- gpio_export(gpio, 0);
- ov965x->gpios[i] = gpio_to_desc(gpio);
- }
-
- return 0;
-}
-
static int ov965x_configure_gpios(struct ov965x *ov965x)
{
struct device *dev = regmap_get_device(ov965x->regmap);
@@ -1493,7 +1459,6 @@ static int ov965x_detect_sensor(struct v4l2_subdev *sd)
static int ov965x_probe(struct i2c_client *client)
{
- const struct ov9650_platform_data *pdata = client->dev.platform_data;
struct v4l2_subdev *sd;
struct ov965x *ov965x;
int ret;
@@ -1513,17 +1478,7 @@ static int ov965x_probe(struct i2c_client *client)
return PTR_ERR(ov965x->regmap);
}
- if (pdata) {
- if (pdata->mclk_frequency == 0) {
- dev_err(&client->dev, "MCLK frequency not specified\n");
- return -EINVAL;
- }
- ov965x->mclk_frequency = pdata->mclk_frequency;
-
- ret = ov965x_configure_gpios_pdata(ov965x, pdata);
- if (ret < 0)
- return ret;
- } else if (dev_fwnode(&client->dev)) {
+ if (dev_fwnode(&client->dev)) {
ov965x->clk = devm_clk_get(&client->dev, NULL);
if (IS_ERR(ov965x->clk))
return PTR_ERR(ov965x->clk);
@@ -1534,7 +1489,7 @@ static int ov965x_probe(struct i2c_client *client)
return ret;
} else {
dev_err(&client->dev,
- "Neither platform data nor device property specified\n");
+ "No device properties specified\n");
return -EINVAL;
}
deleted file mode 100644
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * OV9650/OV9652 camera sensors driver
- *
- * Copyright (C) 2013 Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
- */
-#ifndef OV9650_H_
-#define OV9650_H_
-
-/**
- * struct ov9650_platform_data - ov9650 driver platform data
- * @mclk_frequency: the sensor's master clock frequency in Hz
- * @gpio_pwdn: number of a GPIO connected to OV965X PWDN pin
- * @gpio_reset: number of a GPIO connected to OV965X RESET pin
- *
- * If any of @gpio_pwdn or @gpio_reset are unused then they should be
- * set to a negative value. @mclk_frequency must always be specified.
- */
-struct ov9650_platform_data {
- unsigned long mclk_frequency;
- int gpio_pwdn;
- int gpio_reset;
-};
-#endif /* OV9650_H_ */
Nothing in the kernel uses the platform data code path. Drop it, and drop the use of the old legacy <linux/gpio.h> API in the process. Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v1->v2: - Rebase on v6.0-rc1 --- drivers/media/i2c/ov9650.c | 49 ++------------------------------------ include/media/i2c/ov9650.h | 24 ------------------- 2 files changed, 2 insertions(+), 71 deletions(-) delete mode 100644 include/media/i2c/ov9650.h