diff mbox

[Xen-devel,v5,8/8] pl011: Refactor pl011 driver to dt and common initialization parts

Message ID 1453536020-16196-9-git-send-email-zhaoshenglong@huawei.com
State New
Headers show

Commit Message

Shannon Zhao Jan. 23, 2016, 8 a.m. UTC 
From: Shannon Zhao <shannon.zhao@linaro.org>


Refactor pl011 driver to dt and common initialization parts. This will
be useful later when acpi specific uart initialization function is
introduced.

Signed-off-by: Parth Dixit <parth.dixit@linaro.org>

Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>

Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>

---
 xen/drivers/char/pl011.c | 64 ++++++++++++++++++++++++++++--------------------
 1 file changed, 38 insertions(+), 26 deletions(-)

-- 
2.0.4



_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
diff mbox

Patch

diff --git a/xen/drivers/char/pl011.c b/xen/drivers/char/pl011.c
index 67e6df5..7e16294 100644
--- a/xen/drivers/char/pl011.c
+++ b/xen/drivers/char/pl011.c
@@ -226,12 +226,42 @@  static struct uart_driver __read_mostly pl011_driver = {
     .vuart_info   = pl011_vuart,
 };
 
+static int __init pl011_uart_init(int irq, u64 addr, u64 size)
+{
+    struct pl011 *uart;
+
+    uart = &pl011_com;
+    uart->irq       = irq;
+    uart->clock_hz  = 0x16e3600;
+    uart->baud      = BAUD_AUTO;
+    uart->data_bits = 8;
+    uart->parity    = PARITY_NONE;
+    uart->stop_bits = 1;
+
+    uart->regs = ioremap_nocache(addr, size);
+    if ( !uart->regs )
+    {
+        printk("pl011: Unable to map the UART memory\n");
+        return -ENOMEM;
+    }
+
+    uart->vuart.base_addr = addr;
+    uart->vuart.size = size;
+    uart->vuart.data_off = DR;
+    uart->vuart.status_off = FR;
+    uart->vuart.status = 0;
+
+    /* Register with generic serial driver. */
+    serial_register_uart(SERHND_DTUART, &pl011_driver, uart);
+
+    return 0;
+}
+
 /* TODO: Parse UART config from the command line */
-static int __init pl011_uart_init(struct dt_device_node *dev,
-                                  const void *data)
+static int __init pl011_dt_uart_init(struct dt_device_node *dev,
+                                     const void *data)
 {
     const char *config = data;
-    struct pl011 *uart;
     int res;
     u64 addr, size;
 
@@ -240,14 +270,6 @@  static int __init pl011_uart_init(struct dt_device_node *dev,
         printk("WARNING: UART configuration is not supported\n");
     }
 
-    uart = &pl011_com;
-
-    uart->clock_hz  = 0x16e3600;
-    uart->baud      = BAUD_AUTO;
-    uart->data_bits = 8;
-    uart->parity    = PARITY_NONE;
-    uart->stop_bits = 1;
-
     res = dt_device_get_address(dev, 0, &addr, &size);
     if ( res )
     {
@@ -262,24 +284,14 @@  static int __init pl011_uart_init(struct dt_device_node *dev,
         printk("pl011: Unable to retrieve the IRQ\n");
         return -EINVAL;
     }
-    uart->irq = res;
 
-    uart->regs = ioremap_nocache(addr, size);
-    if ( !uart->regs )
+    res = pl011_uart_init(res, addr, size);
+    if ( res < 0 )
     {
-        printk("pl011: Unable to map the UART memory\n");
-        return -ENOMEM;
+        printk("pl011: Unable to initialize\n");
+        return res;
     }
 
-    uart->vuart.base_addr = addr;
-    uart->vuart.size = size;
-    uart->vuart.data_off = DR;
-    uart->vuart.status_off = FR;
-    uart->vuart.status = 0;
-
-    /* Register with generic serial driver. */
-    serial_register_uart(SERHND_DTUART, &pl011_driver, uart);
-
     dt_device_set_used_by(dev, DOMID_XEN);
 
     return 0;
@@ -293,7 +305,7 @@  static const struct dt_device_match pl011_dt_match[] __initconst =
 
 DT_DEVICE_START(pl011, "PL011 UART", DEVICE_SERIAL)
         .dt_match = pl011_dt_match,
-        .init = pl011_uart_init,
+        .init = pl011_dt_uart_init,
 DT_DEVICE_END
 
 /*