diff mbox series

arm64: dts: qcom: sm8450: Add description of camera control interfaces

Message ID 20220901073504.3077363-1-vladimir.zapolskiy@linaro.org
State Accepted
Commit b318c53e9c383b26d7972175e8ca60dc3552b4d2
Headers show
Series arm64: dts: qcom: sm8450: Add description of camera control interfaces | expand

Commit Message

Vladimir Zapolskiy Sept. 1, 2022, 7:35 a.m. UTC 
Add description of two CCI controllers found on QCOM SM8450.

Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 142 +++++++++++++++++++++++++++
 1 file changed, 142 insertions(+)

Comments

Bjorn Andersson Oct. 18, 2022, 3:15 a.m. UTC | #1 
On Thu, 1 Sep 2022 10:35:04 +0300, Vladimir Zapolskiy wrote:
> Add description of two CCI controllers found on QCOM SM8450.
> 
> 

Applied, thanks!

[1/1] arm64: dts: qcom: sm8450: Add description of camera control interfaces
      commit: b318c53e9c383b26d7972175e8ca60dc3552b4d2

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 4978c5ba5dd0..ce634504e08b 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -2302,6 +2302,84 @@  IPCC_MPROC_SIGNAL_GLINK_QMP
 			};
 		};
 
+		cci0: cci@ac15000 {
+			compatible = "qcom,sm8450-cci";
+			reg = <0 0xac15000 0 0x1000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac16000 {
+			compatible = "qcom,sm8450-cci";
+			reg = <0 0xac16000 0 0x1000>;
+			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+			pinctrl-0 = <&cci2_default &cci3_default>;
+			pinctrl-1 = <&cci2_sleep &cci3_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		camcc: clock-controller@ade0000 {
 			compatible = "qcom,sm8450-camcc";
 			reg = <0 0x0ade0000 0 0x20000>;
@@ -2379,6 +2457,70 @@  tlmm: pinctrl@f100000 {
 			gpio-ranges = <&tlmm 0 0 211>;
 			wakeup-parent = <&pdc>;
 
+			cci0_default: cci0-default-state {
+				/* SDA, SCL */
+				pins = "gpio110", "gpio111";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				/* SDA, SCL */
+				pins = "gpio110", "gpio111";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_default: cci1-default-state {
+				/* SDA, SCL */
+				pins = "gpio112", "gpio113";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				/* SDA, SCL */
+				pins = "gpio112", "gpio113";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci2_default: cci2-default-state {
+				/* SDA, SCL */
+				pins = "gpio114", "gpio115";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci2_sleep: cci2-sleep-state {
+				/* SDA, SCL */
+				pins = "gpio114", "gpio115";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci3_default: cci3-default-state {
+				/* SDA, SCL */
+				pins = "gpio208", "gpio209";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci3_sleep: cci3-sleep-state {
+				/* SDA, SCL */
+				pins = "gpio208", "gpio209";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
 			pcie0_default_state: pcie0-default-state {
 				perst {
 					pins = "gpio94";