@@ -246,37 +246,10 @@ static void altera_uart_rx_chars(struct altera_uart *pp)
tty_flip_buffer_push(&port->state->port);
}
-static void altera_uart_tx_chars(struct altera_uart *pp)
-{
- struct uart_port *port = &pp->port;
- struct circ_buf *xmit = &port->state->xmit;
-
- if (port->x_char) {
- /* Send special char - probably flow control */
- altera_uart_writel(port, port->x_char, ALTERA_UART_TXDATA_REG);
- port->x_char = 0;
- port->icount.tx++;
- return;
- }
-
- while (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
- ALTERA_UART_STATUS_TRDY_MSK) {
- if (xmit->head == xmit->tail)
- break;
- altera_uart_writel(port, xmit->buf[xmit->tail],
- ALTERA_UART_TXDATA_REG);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (xmit->head == xmit->tail) {
- pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
- altera_uart_update_ctrl_reg(pp);
- }
-}
+static DEFINE_UART_PORT_TX_HELPER(altera_uart_tx_chars, port, ch,
+ altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
+ ALTERA_UART_STATUS_TRDY_MSK,
+ altera_uart_writel(port, ch, ALTERA_UART_TXDATA_REG));
static irqreturn_t altera_uart_interrupt(int irq, void *data)
{
@@ -290,7 +263,7 @@ static irqreturn_t altera_uart_interrupt(int irq, void *data)
if (isr & ALTERA_UART_STATUS_RRDY_MSK)
altera_uart_rx_chars(pp);
if (isr & ALTERA_UART_STATUS_TRDY_MSK)
- altera_uart_tx_chars(pp);
+ altera_uart_tx_chars(&pp->port);
spin_unlock(&port->lock);
return IRQ_RETVAL(isr);
@@ -812,36 +812,21 @@ static void atmel_rx_chars(struct uart_port *port)
atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_rx);
}
+static DEFINE_UART_PORT_TX_HELPER(atmel_do_tx_chars, port, ch,
+ atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_TXRDY,
+ atmel_uart_write_char(port, ch));
+
/*
* Transmit characters (called from tasklet with TXRDY interrupt
* disabled)
*/
static void atmel_tx_chars(struct uart_port *port)
{
- struct circ_buf *xmit = &port->state->xmit;
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ unsigned int pending;
- if (port->x_char &&
- (atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_TXRDY)) {
- atmel_uart_write_char(port, port->x_char);
- port->icount.tx++;
- port->x_char = 0;
- }
- if (uart_circ_empty(xmit) || uart_tx_stopped(port))
- return;
-
- while (atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_TXRDY) {
- atmel_uart_write_char(port, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (!uart_circ_empty(xmit)) {
+ pending = atmel_do_tx_chars(port);
+ if (pending) {
/* we still have characters to transmit, so we should continue
* transmitting them when TX is ready, regardless of
* mode or duplexity
@@ -740,36 +740,18 @@ static int lpuart32_poll_get_char(struct uart_port *port)
}
#endif
-static inline void lpuart_transmit_buffer(struct lpuart_port *sport)
+static bool lpuart_tx_ready(struct uart_port *port)
{
- struct circ_buf *xmit = &sport->port.state->xmit;
-
- if (sport->port.x_char) {
- writeb(sport->port.x_char, sport->port.membase + UARTDR);
- sport->port.icount.tx++;
- sport->port.x_char = 0;
- return;
- }
-
- if (lpuart_stopped_or_empty(&sport->port)) {
- lpuart_stop_tx(&sport->port);
- return;
- }
-
- while (!uart_circ_empty(xmit) &&
- (readb(sport->port.membase + UARTTCFIFO) < sport->txfifo_size)) {
- writeb(xmit->buf[xmit->tail], sport->port.membase + UARTDR);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- sport->port.icount.tx++;
- }
+ struct lpuart_port *sport = container_of(port, struct lpuart_port,
+ port);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&sport->port);
-
- if (uart_circ_empty(xmit))
- lpuart_stop_tx(&sport->port);
+ return readb(port->membase + UARTTCFIFO) < sport->txfifo_size;
}
+static DEFINE_UART_PORT_TX_HELPER(lpuart_transmit_buffer, port, ch,
+ lpuart_tx_ready(port),
+ writeb(ch, port->membase + UARTDR));
+
static inline void lpuart32_transmit_buffer(struct lpuart_port *sport)
{
struct circ_buf *xmit = &sport->port.state->xmit;
@@ -820,7 +802,7 @@ static void lpuart_start_tx(struct uart_port *port)
lpuart_dma_tx(sport);
} else {
if (readb(port->membase + UARTSR1) & UARTSR1_TDRE)
- lpuart_transmit_buffer(sport);
+ lpuart_transmit_buffer(&sport->port);
}
}
@@ -877,7 +859,7 @@ static unsigned int lpuart32_tx_empty(struct uart_port *port)
static void lpuart_txint(struct lpuart_port *sport)
{
spin_lock(&sport->port.lock);
- lpuart_transmit_buffer(sport);
+ lpuart_transmit_buffer(&sport->port);
spin_unlock(&sport->port.lock);
}
@@ -95,7 +95,6 @@
#define ASCFSTAT_TXFREEMASK 0x3F000000
#define ASCFSTAT_TXFREEOFF 24
-static void lqasc_tx_chars(struct uart_port *port);
static struct ltq_uart_port *lqasc_port[MAXPORTS];
static struct uart_driver lqasc_reg;
@@ -139,6 +138,18 @@ lqasc_stop_tx(struct uart_port *port)
return;
}
+static bool
+lqasc_tx_ready(struct uart_port *port)
+{
+ u32 fstat = __raw_readl(port->membase + LTQ_ASC_FSTAT);
+
+ return (fstat & ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF;
+}
+
+static DEFINE_UART_PORT_TX_HELPER(lqasc_tx_chars, port, ch,
+ lqasc_tx_ready(port),
+ writeb(ch, port->membase + LTQ_ASC_TBUF));
+
static void
lqasc_start_tx(struct uart_port *port)
{
@@ -219,37 +230,6 @@ lqasc_rx_chars(struct uart_port *port)
return 0;
}
-static void
-lqasc_tx_chars(struct uart_port *port)
-{
- struct circ_buf *xmit = &port->state->xmit;
- if (uart_tx_stopped(port)) {
- lqasc_stop_tx(port);
- return;
- }
-
- while (((__raw_readl(port->membase + LTQ_ASC_FSTAT) &
- ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF) != 0) {
- if (port->x_char) {
- writeb(port->x_char, port->membase + LTQ_ASC_TBUF);
- port->icount.tx++;
- port->x_char = 0;
- continue;
- }
-
- if (uart_circ_empty(xmit))
- break;
-
- writeb(port->state->xmit.buf[port->state->xmit.tail],
- port->membase + LTQ_ASC_TBUF);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-}
-
static irqreturn_t
lqasc_tx_int(int irq, void *_port)
{
@@ -276,41 +276,17 @@ static void __serial_lpc32xx_rx(struct uart_port *port)
tty_flip_buffer_push(tport);
}
-static void serial_lpc32xx_stop_tx(struct uart_port *port);
-
-static void __serial_lpc32xx_tx(struct uart_port *port)
+static bool serial_lpc32xx_tx_ready(struct uart_port *port)
{
- struct circ_buf *xmit = &port->state->xmit;
+ u32 level = readl(LPC32XX_HSUART_LEVEL(port->membase));
- if (port->x_char) {
- writel((u32)port->x_char, LPC32XX_HSUART_FIFO(port->membase));
- port->icount.tx++;
- port->x_char = 0;
- return;
- }
-
- if (uart_circ_empty(xmit) || uart_tx_stopped(port))
- goto exit_tx;
-
- /* Transfer data */
- while (LPC32XX_HSU_TX_LEV(readl(
- LPC32XX_HSUART_LEVEL(port->membase))) < 64) {
- writel((u32) xmit->buf[xmit->tail],
- LPC32XX_HSUART_FIFO(port->membase));
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
-exit_tx:
- if (uart_circ_empty(xmit))
- serial_lpc32xx_stop_tx(port);
+ return LPC32XX_HSU_TX_LEV(level) < 64;
}
+static DEFINE_UART_PORT_TX_HELPER(__serial_lpc32xx_tx, port, ch,
+ serial_lpc32xx_tx_ready(port),
+ writel(ch, LPC32XX_HSUART_FIFO(port->membase)));
+
static irqreturn_t serial_lpc32xx_interrupt(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
@@ -324,32 +324,15 @@ static void mcf_rx_chars(struct mcf_uart *pp)
/****************************************************************************/
+static DEFINE_UART_PORT_TX_HELPER(mcf_do_tx_chars, port, ch,
+ readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY,
+ writeb(ch, port->membase + MCFUART_UTB));
+
static void mcf_tx_chars(struct mcf_uart *pp)
{
struct uart_port *port = &pp->port;
- struct circ_buf *xmit = &port->state->xmit;
-
- if (port->x_char) {
- /* Send special char - probably flow control */
- writeb(port->x_char, port->membase + MCFUART_UTB);
- port->x_char = 0;
- port->icount.tx++;
- return;
- }
-
- while (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) {
- if (uart_circ_empty(xmit))
- break;
- writeb(xmit->buf[xmit->tail], port->membase + MCFUART_UTB);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1);
- port->icount.tx++;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
- if (uart_circ_empty(xmit)) {
- mcf_stop_tx(port);
+ if (!mcf_do_tx_chars(port)) {
/* Disable TX to negate RTS automatically */
if (port->rs485.flags & SER_RS485_ENABLED)
writeb(MCFUART_UCR_TXDISABLE,
@@ -1338,7 +1338,6 @@ mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser)
return 0;
}
-
static const struct uart_ops mpc52xx_uart_ops = {
.tx_empty = mpc52xx_uart_tx_empty,
.set_mctrl = mpc52xx_uart_set_mctrl,
@@ -1425,46 +1424,9 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
return psc_ops->raw_rx_rdy(port);
}
-static inline int
-mpc52xx_uart_int_tx_chars(struct uart_port *port)
-{
- struct circ_buf *xmit = &port->state->xmit;
-
- /* Process out of band chars */
- if (port->x_char) {
- psc_ops->write_char(port, port->x_char);
- port->icount.tx++;
- port->x_char = 0;
- return 1;
- }
-
- /* Nothing to do ? */
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- mpc52xx_uart_stop_tx(port);
- return 0;
- }
-
- /* Send chars */
- while (psc_ops->raw_tx_rdy(port)) {
- psc_ops->write_char(port, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- }
-
- /* Wake up */
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- /* Maybe we're done after all */
- if (uart_circ_empty(xmit)) {
- mpc52xx_uart_stop_tx(port);
- return 0;
- }
-
- return 1;
-}
+static DEFINE_UART_PORT_TX_HELPER(mpc52xx_uart_int_tx_chars, port, ch,
+ psc_ops->raw_tx_rdy(port),
+ psc_ops->write_char(port, ch));
static irqreturn_t
mpc5xxx_uart_process_int(struct uart_port *port)
@@ -127,32 +127,9 @@ static void mps2_uart_stop_tx(struct uart_port *port)
mps2_uart_write8(port, control, UARTn_CTRL);
}
-static void mps2_uart_tx_chars(struct uart_port *port)
-{
- struct circ_buf *xmit = &port->state->xmit;
-
- while (!(mps2_uart_read8(port, UARTn_STATE) & UARTn_STATE_TX_FULL)) {
- if (port->x_char) {
- mps2_uart_write8(port, port->x_char, UARTn_DATA);
- port->x_char = 0;
- port->icount.tx++;
- continue;
- }
-
- if (uart_circ_empty(xmit) || uart_tx_stopped(port))
- break;
-
- mps2_uart_write8(port, xmit->buf[xmit->tail], UARTn_DATA);
- xmit->tail = (xmit->tail + 1) % UART_XMIT_SIZE;
- port->icount.tx++;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- mps2_uart_stop_tx(port);
-}
+static DEFINE_UART_PORT_TX_HELPER(mps2_uart_tx_chars, port, ch,
+ mps2_uart_tx_empty(port),
+ mps2_uart_write8(port, ch, UARTn_DATA));
static void mps2_uart_start_tx(struct uart_port *port)
{
@@ -566,6 +566,10 @@ static int mxs_auart_dma_tx(struct mxs_auart_port *s, int size)
return 0;
}
+static DEFINE_UART_PORT_TX_HELPER(mxs_auart_do_tx_chars, port, ch,
+ !(mxs_read(to_auart_port(port), REG_STAT) & AUART_STAT_TXFF),
+ mxs_write(ch, to_auart_port(port), REG_DATA));
+
static void mxs_auart_tx_chars(struct mxs_auart_port *s)
{
struct circ_buf *xmit = &s->port.state->xmit;
@@ -603,31 +607,10 @@ static void mxs_auart_tx_chars(struct mxs_auart_port *s)
return;
}
-
- while (!(mxs_read(s, REG_STAT) & AUART_STAT_TXFF)) {
- if (s->port.x_char) {
- s->port.icount.tx++;
- mxs_write(s->port.x_char, s, REG_DATA);
- s->port.x_char = 0;
- continue;
- }
- if (!uart_circ_empty(xmit) && !uart_tx_stopped(&s->port)) {
- s->port.icount.tx++;
- mxs_write(xmit->buf[xmit->tail], s, REG_DATA);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- } else
- break;
- }
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&s->port);
-
- if (uart_circ_empty(&(s->port.state->xmit)))
- mxs_clr(AUART_INTR_TXIEN, s, REG_INTR);
- else
+ if (mxs_auart_do_tx_chars(&s->port))
mxs_set(AUART_INTR_TXIEN, s, REG_INTR);
-
- if (uart_tx_stopped(&s->port))
- mxs_auart_stop_tx(&s->port);
+ else
+ mxs_clr(AUART_INTR_TXIEN, s, REG_INTR);
}
static void mxs_auart_rx_char(struct mxs_auart_port *s)
@@ -179,38 +179,9 @@ static void owl_uart_start_tx(struct uart_port *port)
owl_uart_write(port, val, OWL_UART_CTL);
}
-static void owl_uart_send_chars(struct uart_port *port)
-{
- struct circ_buf *xmit = &port->state->xmit;
- unsigned int ch;
-
- if (port->x_char) {
- while (!(owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TFFU))
- cpu_relax();
- owl_uart_write(port, port->x_char, OWL_UART_TXDAT);
- port->icount.tx++;
- port->x_char = 0;
- }
-
- if (uart_tx_stopped(port))
- return;
-
- while (!(owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TFFU)) {
- if (uart_circ_empty(xmit))
- break;
-
- ch = xmit->buf[xmit->tail];
- owl_uart_write(port, ch, OWL_UART_TXDAT);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- owl_uart_stop_tx(port);
-}
+static DEFINE_UART_PORT_TX_HELPER(owl_uart_send_chars, port, ch,
+ !(owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TFFU),
+ owl_uart_write(port, ch, OWL_UART_TXDAT));
static void owl_uart_receive_chars(struct uart_port *port)
{
@@ -226,45 +226,34 @@ sa1100_rx_chars(struct sa1100_port *sport)
tty_flip_buffer_push(&sport->port.state->port);
}
-static void sa1100_tx_chars(struct sa1100_port *sport)
+static bool sa1100_tx_ready(struct uart_port *port)
{
- struct circ_buf *xmit = &sport->port.state->xmit;
+ struct sa1100_port *sport =
+ container_of(port, struct sa1100_port, port);
- if (sport->port.x_char) {
- UART_PUT_CHAR(sport, sport->port.x_char);
- sport->port.icount.tx++;
- sport->port.x_char = 0;
- return;
- }
+ return UART_GET_UTSR1(sport) & UTSR1_TNF;
+}
+
+static void sa1100_put_char(struct uart_port *port, unsigned char ch)
+{
+ struct sa1100_port *sport =
+ container_of(port, struct sa1100_port, port);
+
+ UART_PUT_CHAR(sport, ch);
+}
+static DEFINE_UART_PORT_TX_HELPER(sa1100_do_tx_chars, port, ch,
+ sa1100_tx_ready(port), sa1100_put_char(port, ch));
+
+static void sa1100_tx_chars(struct sa1100_port *sport)
+{
/*
* Check the modem control lines before
* transmitting anything.
*/
sa1100_mctrl_check(sport);
- if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
- sa1100_stop_tx(&sport->port);
- return;
- }
-
- /*
- * Tried using FIFO (not checking TNF) for fifo fill:
- * still had the '4 bytes repeated' problem.
- */
- while (UART_GET_UTSR1(sport) & UTSR1_TNF) {
- UART_PUT_CHAR(sport, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- sport->port.icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&sport->port);
-
- if (uart_circ_empty(xmit))
- sa1100_stop_tx(&sport->port);
+ sa1100_do_tx_chars(&sport->port);
}
static irqreturn_t sa1100_int(int irq, void *dev_id)
@@ -187,37 +187,17 @@ static void handle_rx(struct uart_port *port)
tty_flip_buffer_push(tport);
}
-static void handle_tx(struct uart_port *port)
+static unsigned int vt8500_tx_empty(struct uart_port *port)
{
- struct circ_buf *xmit = &port->state->xmit;
-
- if (port->x_char) {
- writeb(port->x_char, port->membase + VT8500_TXFIFO);
- port->icount.tx++;
- port->x_char = 0;
- }
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- vt8500_stop_tx(port);
- return;
- }
+ unsigned int idx = vt8500_read(port, VT8500_URFIDX) & 0x1f;
- while ((vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16) {
- if (uart_circ_empty(xmit))
- break;
-
- writeb(xmit->buf[xmit->tail], port->membase + VT8500_TXFIFO);
-
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- vt8500_stop_tx(port);
+ return idx < 16 ? TIOCSER_TEMT : 0;
}
+static DEFINE_UART_PORT_TX_HELPER(handle_tx, port, ch,
+ vt8500_tx_empty(port),
+ writeb(ch, port->membase + VT8500_TXFIFO));
+
static void vt8500_start_tx(struct uart_port *port)
{
struct vt8500_port *vt8500_port = container_of(port,
@@ -260,12 +240,6 @@ static irqreturn_t vt8500_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static unsigned int vt8500_tx_empty(struct uart_port *port)
-{
- return (vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16 ?
- TIOCSER_TEMT : 0;
-}
-
static unsigned int vt8500_get_mctrl(struct uart_port *port)
{
unsigned int usr;
DEFINE_UART_PORT_TX_HELPER() is a new helper to send characters to the device. Use it in these drivers. Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Richard Genoud <richard.genoud@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: "Andreas Färber" <afaerber@suse.de> Cc: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> --- drivers/tty/serial/altera_uart.c | 37 +++------------------- drivers/tty/serial/atmel_serial.c | 29 +++++------------- drivers/tty/serial/fsl_lpuart.c | 38 ++++++----------------- drivers/tty/serial/lantiq.c | 44 ++++++++------------------- drivers/tty/serial/lpc32xx_hs.c | 38 +++++------------------ drivers/tty/serial/mcf.c | 27 +++------------- drivers/tty/serial/mpc52xx_uart.c | 44 ++------------------------- drivers/tty/serial/mps2-uart.c | 29 ++---------------- drivers/tty/serial/mxs-auart.c | 31 +++++-------------- drivers/tty/serial/owl-uart.c | 35 ++------------------- drivers/tty/serial/sa1100.c | 49 ++++++++++++------------------ drivers/tty/serial/vt8500_serial.c | 40 +++++------------------- 12 files changed, 88 insertions(+), 353 deletions(-)