diff mbox series

wifi: rtl8xxxu: Support new chip RTL8188FU

Message ID 5dec7f70-0c1f-b487-3e3c-35394e2adc49@gmail.com
State Superseded
Headers show
Series wifi: rtl8xxxu: Support new chip RTL8188FU | expand

Commit Message

Bitterblue Smith Sept. 5, 2022, 8:57 p.m. UTC
This chip is found in the cheapest USB adapters, e.g. 1.17 USD with
VAT and shipping from China included.

It's a gen 2 chip, similar to the RTL8723BU, just without Bluetooth.
Features: 2.4 GHz, b/g/n mode, 1T1R, 150 Mbps.

The vendor driver rtl8188fu version 4.3.23.6_20964.20170110 [0]
was used as reference. The CD shipped with the device includes a
newer driver, version 5.11.5-1-g12f7cde4b.20201102, but that one
couldn't complete the WPA2 key exchange thing for whatever reason.

The speed is not great yet, but it's usable.

[0] https://github.com/kelebek333/rtl8188fu

Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
---
 .../net/wireless/realtek/rtl8xxxu/Makefile    |    2 +-
 .../net/wireless/realtek/rtl8xxxu/rtl8xxxu.h  |   56 +
 .../realtek/rtl8xxxu/rtl8xxxu_8188f.c         | 1698 +++++++++++++++++
 .../realtek/rtl8xxxu/rtl8xxxu_8192c.c         |    1 +
 .../realtek/rtl8xxxu/rtl8xxxu_8192e.c         |    1 +
 .../realtek/rtl8xxxu/rtl8xxxu_8723a.c         |    1 +
 .../realtek/rtl8xxxu/rtl8xxxu_8723b.c         |    3 +-
 .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c |  137 +-
 .../wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h |   19 +
 9 files changed, 1893 insertions(+), 25 deletions(-)
 create mode 100644 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c

Comments

kernel test robot Sept. 6, 2022, 5:52 a.m. UTC | #1
Hi Bitterblue,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on wireless/main]
[also build test WARNING on wireless-next/main linus/master v6.0-rc4 next-20220901]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Bitterblue-Smith/wifi-rtl8xxxu-Support-new-chip-RTL8188FU/20220906-101029
base:   https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless.git main
config: x86_64-allyesconfig (https://download.01.org/0day-ci/archive/20220906/202209061336.yU2hQRkV-lkp@intel.com/config)
compiler: gcc-11 (Debian 11.3.0-5) 11.3.0
reproduce (this is a W=1 build):
        # https://github.com/intel-lab-lkp/linux/commit/66afb88c63c40850c518e4cecea4b211a01e0373
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Bitterblue-Smith/wifi-rtl8xxxu-Support-new-chip-RTL8188FU/20220906-101029
        git checkout 66afb88c63c40850c518e4cecea4b211a01e0373
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        make W=1 O=build_dir ARCH=x86_64 SHELL=/bin/bash drivers/net/wireless/realtek/rtl8xxxu/

If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

>> drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c:508:6: warning: no previous prototype for 'rtl8188fu_config_channel' [-Wmissing-prototypes]
     508 | void rtl8188fu_config_channel(struct ieee80211_hw *hw)
         |      ^~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c:647:6: warning: no previous prototype for 'rtl8188fu_init_aggregation' [-Wmissing-prototypes]
     647 | void rtl8188fu_init_aggregation(struct rtl8xxxu_priv *priv)
         |      ^~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c: In function 'rtl8188fu_phy_iq_calibrate':
>> drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c:1233:25: warning: variable 'path_b_ok' set but not used [-Wunused-but-set-variable]
    1233 |         bool path_a_ok, path_b_ok;
         |                         ^~~~~~~~~
   drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c: At top level:
>> drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c:1550:6: warning: no previous prototype for 'rtl8188fu_power_off' [-Wmissing-prototypes]
    1550 | void rtl8188fu_power_off(struct rtl8xxxu_priv *priv)
         |      ^~~~~~~~~~~~~~~~~~~


vim +/rtl8188fu_config_channel +508 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c

   507	
 > 508	void rtl8188fu_config_channel(struct ieee80211_hw *hw)
   509	{
   510		struct rtl8xxxu_priv *priv = hw->priv;
   511		u32 val32;
   512		u8 channel, subchannel;
   513		bool sec_ch_above;
   514	
   515		channel = (u8)hw->conf.chandef.chan->hw_value;
   516	
   517		/* Set channel*/
   518		val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_MODE_AG);
   519		val32 &= ~MODE_AG_CHANNEL_MASK;
   520		val32 |= channel;
   521		rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, val32);
   522	
   523		/* Spur calibration */
   524		rtl8188f_spur_calibration(priv, channel);
   525	
   526		/* Set bandwidth mode */
   527		if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_20 ||
   528		    hw->conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
   529		    hw->conf.chandef.width == NL80211_CHAN_WIDTH_40) {
   530			val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
   531			val32 &= ~FPGA_RF_MODE;
   532			val32 |= hw->conf.chandef.width == NL80211_CHAN_WIDTH_40;
   533			rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
   534	
   535			val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE);
   536			val32 &= ~FPGA_RF_MODE;
   537			val32 |= hw->conf.chandef.width == NL80211_CHAN_WIDTH_40;
   538			rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32);
   539	
   540			/* RXADC CLK */
   541			val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
   542			val32 |= GENMASK(10, 8);
   543			rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
   544	
   545			/* TXDAC CLK */
   546			val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
   547			val32 |= BIT(14) | BIT(12);
   548			val32 &= ~BIT(13);
   549			rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
   550	
   551			/* small BW */
   552			val32 = rtl8xxxu_read32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT);
   553			val32 &= ~GENMASK(31, 30);
   554			rtl8xxxu_write32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT, val32);
   555	
   556			/* adc buffer clk */
   557			val32 = rtl8xxxu_read32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT);
   558			val32 &= ~BIT(29);
   559			val32 |= BIT(28);
   560			rtl8xxxu_write32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT, val32);
   561	
   562			/* adc buffer clk */
   563			val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_RX_AFE);
   564			val32 &= ~BIT(29);
   565			val32 |= BIT(28);
   566			rtl8xxxu_write32(priv, REG_OFDM0_XA_RX_AFE, val32);
   567	
   568			val32 = rtl8xxxu_read32(priv, REG_OFDM_RX_DFIR);
   569			val32 &= ~BIT(19);
   570			rtl8xxxu_write32(priv, REG_OFDM_RX_DFIR, val32);
   571	
   572			val32 = rtl8xxxu_read32(priv, REG_OFDM_RX_DFIR);
   573			val32 &= ~GENMASK(23, 20);
   574			val32 |= BIT(21);
   575			if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_20 ||
   576			    hw->conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT)
   577				val32 |= BIT(20);
   578			else if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40)
   579				val32 |= BIT(22);
   580			rtl8xxxu_write32(priv, REG_OFDM_RX_DFIR, val32);
   581	
   582			if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40) {
   583				if (hw->conf.chandef.center_freq1 >
   584				    hw->conf.chandef.chan->center_freq) {
   585					sec_ch_above = 1;
   586					channel += 2;
   587				} else {
   588					sec_ch_above = 0;
   589					channel -= 2;
   590				}
   591	
   592				/* Set Control channel to upper or lower. */
   593				val32 = rtl8xxxu_read32(priv, REG_CCK0_SYSTEM);
   594				val32 &= ~CCK0_SIDEBAND;
   595				if (!sec_ch_above)
   596					val32 |= CCK0_SIDEBAND;
   597				rtl8xxxu_write32(priv, REG_CCK0_SYSTEM, val32);
   598	
   599				val32 = rtl8xxxu_read32(priv, REG_DATA_SUBCHANNEL);
   600				/*
   601				 * It doesn't make sense to clear only bits 0-3,
   602				 * but this is what the vendor driver does.
   603				 */
   604				val32 &= ~GENMASK(3, 0);
   605				if (sec_ch_above)
   606					subchannel = (2 << 4) | 2;
   607				else
   608					subchannel = (1 << 4) | 1;
   609				val32 |= subchannel;
   610				rtl8xxxu_write32(priv, REG_DATA_SUBCHANNEL, val32);
   611	
   612				val32 = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET);
   613				val32 &= ~RSR_RSC_BANDWIDTH_40M;
   614				rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, val32);
   615			}
   616	
   617			/* RF TRX_BW */
   618			val32 = channel;
   619			if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_20 ||
   620			    hw->conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT)
   621				val32 |= MODE_AG_BW_20MHZ_8723B;
   622			else if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40)
   623				val32 |= MODE_AG_BW_40MHZ_8723B;
   624			rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, val32);
   625	
   626			/* FILTER BW&RC Corner (ACPR) */
   627			if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_20 ||
   628			    hw->conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT)
   629				val32 = 0x00065;
   630			else if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40)
   631				val32 = 0x00025;
   632			rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RXG_MIX_SWBW, val32);
   633	
   634			if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_20 ||
   635			    hw->conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT)
   636				val32 = 0x0;
   637			else if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40)
   638				val32 = 0x01000;
   639			rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RX_BB2, val32);
   640	
   641			/* RC Corner */
   642			rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00140);
   643			rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RX_G2, 0x01c6c);
   644		}
   645	}
   646	
 > 647	void rtl8188fu_init_aggregation(struct rtl8xxxu_priv *priv)
   648	{
   649		u8 agg_ctrl, rxdma_mode, usb_tx_agg_desc_num = 6;
   650		u32 agg_rx, val32;
   651	
   652		/* TX aggregation */
   653		val32 = rtl8xxxu_read32(priv, REG_DWBCN0_CTRL_8188F);
   654		val32 &= ~(0xf << 4);
   655		val32 |= usb_tx_agg_desc_num << 4;
   656		rtl8xxxu_write32(priv, REG_DWBCN0_CTRL_8188F, val32);
   657		rtl8xxxu_write8(priv, REG_DWBCN1_CTRL_8723B, usb_tx_agg_desc_num << 1);
   658	
   659		/* RX aggregation */
   660		agg_ctrl = rtl8xxxu_read8(priv, REG_TRXDMA_CTRL);
   661		agg_ctrl &= ~TRXDMA_CTRL_RXDMA_AGG_EN;
   662	
   663		agg_rx = rtl8xxxu_read32(priv, REG_RXDMA_AGG_PG_TH);
   664		agg_rx &= ~RXDMA_USB_AGG_ENABLE;
   665		agg_rx &= ~0xFF0F; /* reset agg size and timeout */
   666	
   667		rxdma_mode = rtl8xxxu_read8(priv, REG_RXDMA_PRO_8723B);
   668		rxdma_mode &= ~BIT(1);
   669	
   670		rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl);
   671		rtl8xxxu_write32(priv, REG_RXDMA_AGG_PG_TH, agg_rx);
   672		rtl8xxxu_write8(priv, REG_RXDMA_PRO_8723B, rxdma_mode);
   673	}
   674
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/Makefile b/drivers/net/wireless/realtek/rtl8xxxu/Makefile
index b278f8697cc0..c4ad5325f5e7 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/Makefile
+++ b/drivers/net/wireless/realtek/rtl8xxxu/Makefile
@@ -2,4 +2,4 @@ 
 obj-$(CONFIG_RTL8XXXU)	+= rtl8xxxu.o
 
 rtl8xxxu-y	:= rtl8xxxu_core.o rtl8xxxu_8192e.o rtl8xxxu_8723b.o \
-		   rtl8xxxu_8723a.o rtl8xxxu_8192c.o
+		   rtl8xxxu_8723a.o rtl8xxxu_8192c.o rtl8xxxu_8188f.o
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index 7ddce3c3f0c4..501900c07fac 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -35,6 +35,7 @@ 
 #define REALTEK_USB_CMD_IDX		0x00
 
 #define TX_TOTAL_PAGE_NUM		0xf8
+#define TX_TOTAL_PAGE_NUM_8188F		0xf7
 #define TX_TOTAL_PAGE_NUM_8192E		0xf3
 #define TX_TOTAL_PAGE_NUM_8723B		0xf7
 /* (HPQ + LPQ + NPQ + PUBQ) = TX_TOTAL_PAGE_NUM */
@@ -43,6 +44,11 @@ 
 #define TX_PAGE_NUM_LO_PQ		0x02
 #define TX_PAGE_NUM_NORM_PQ		0x02
 
+#define TX_PAGE_NUM_PUBQ_8188F		0xe5
+#define TX_PAGE_NUM_HI_PQ_8188F		0x0c
+#define TX_PAGE_NUM_LO_PQ_8188F		0x02
+#define TX_PAGE_NUM_NORM_PQ_8188F	0x02
+
 #define TX_PAGE_NUM_PUBQ_8192E		0xe7
 #define TX_PAGE_NUM_HI_PQ_8192E		0x08
 #define TX_PAGE_NUM_LO_PQ_8192E		0x0c
@@ -859,6 +865,50 @@  struct rtl8192eu_efuse {
 	u8 res12[0xc3];
 };
 
+struct rtl8188fu_efuse_tx_power {
+	u8 cck_base[6];
+	u8 ht40_base[5];
+	/* a: ofdm; b: ht20 */
+	struct rtl8723au_idx ht20_ofdm_1s_diff;
+};
+
+struct rtl8188fu_efuse {
+	__le16 rtl_id;
+	u8 res0[0x0e];
+	struct rtl8188fu_efuse_tx_power tx_power_index_A;	/* 0x10 */
+	u8 res1[0x9c];			/* 0x1c */
+	u8 channel_plan;		/* 0xb8 */
+	u8 xtal_k;
+	u8 thermal_meter;
+	u8 iqk_lck;
+	u8 res2[5];
+	u8 rf_board_option;
+	u8 rf_feature_option;
+	u8 rf_bt_setting;
+	u8 eeprom_version;
+	u8 eeprom_customer_id;
+	u8 res3[2];
+	u8 kfree_thermal_k_on;
+	u8 rf_antenna_option;		/* 0xc9 */
+	u8 rfe_option;
+	u8 country_code;
+	u8 res4[4];
+	u8 vid;				/* 0xd0 */
+	u8 res5[1];
+	u8 pid;				/* 0xd2 */
+	u8 res6[1];
+	u8 usb_optional_function;
+	u8 res7[2];
+	u8 mac_addr[ETH_ALEN];		/* 0xd7 */
+	u8 res8[2];
+	u8 vendor_name[7];
+	u8 res9[2];
+	u8 device_name[7];		/* 0xe8 */
+	u8 res10[0x41];
+	u8 unknown[0x0d];		/* 0x130 */
+	u8 res11[0xc3];
+};
+
 struct rtl8xxxu_reg8val {
 	u16 reg;
 	u8 val;
@@ -1368,6 +1418,7 @@  struct rtl8xxxu_priv {
 		struct rtl8723bu_efuse efuse8723bu;
 		struct rtl8192cu_efuse efuse8192;
 		struct rtl8192eu_efuse efuse8192eu;
+		struct rtl8188fu_efuse efuse8188fu;
 	} efuse_wifi;
 	u32 adda_backup[RTL8XXXU_ADDA_REGS];
 	u32 mac_backup[RTL8XXXU_MAC_REGS];
@@ -1414,6 +1465,7 @@  struct rtl8xxxu_fileops {
 	void (*init_phy_bb) (struct rtl8xxxu_priv *priv);
 	int (*init_phy_rf) (struct rtl8xxxu_priv *priv);
 	void (*phy_init_antenna_selection) (struct rtl8xxxu_priv *priv);
+	void (*phy_lc_calibrate) (struct rtl8xxxu_priv *priv);
 	void (*phy_iq_calibrate) (struct rtl8xxxu_priv *priv);
 	void (*config_channel) (struct ieee80211_hw *hw);
 	int (*parse_rx_desc) (struct rtl8xxxu_priv *priv, struct sk_buff *skb);
@@ -1493,9 +1545,11 @@  int rtl8xxxu_init_phy_regs(struct rtl8xxxu_priv *priv,
 int rtl8xxxu_load_firmware(struct rtl8xxxu_priv *priv, char *fw_name);
 void rtl8xxxu_firmware_self_reset(struct rtl8xxxu_priv *priv);
 void rtl8xxxu_power_off(struct rtl8xxxu_priv *priv);
+int rtl8xxxu_read_efuse8(struct rtl8xxxu_priv *priv, u16 offset, u8 *data);
 void rtl8xxxu_reset_8051(struct rtl8xxxu_priv *priv);
 int rtl8xxxu_auto_llt_table(struct rtl8xxxu_priv *priv);
 void rtl8xxxu_gen2_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start);
+void rtl8723a_phy_lc_calibrate(struct rtl8xxxu_priv *priv);
 int rtl8xxxu_flush_fifo(struct rtl8xxxu_priv *priv);
 int rtl8xxxu_gen2_h2c_cmd(struct rtl8xxxu_priv *priv,
 			  struct h2c_cmd *h2c, int len);
@@ -1539,7 +1593,9 @@  void rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
 			     u32 rts_rate);
 void rtl8723bu_set_ps_tdma(struct rtl8xxxu_priv *priv,
 			   u8 arg1, u8 arg2, u8 arg3, u8 arg4, u8 arg5);
+void rtl8723bu_phy_init_antenna_selection(struct rtl8xxxu_priv *priv);
 
+extern struct rtl8xxxu_fileops rtl8188fu_fops;
 extern struct rtl8xxxu_fileops rtl8192cu_fops;
 extern struct rtl8xxxu_fileops rtl8192eu_fops;
 extern struct rtl8xxxu_fileops rtl8723au_fops;
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c
new file mode 100644
index 000000000000..9b1400912a74
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c
@@ -0,0 +1,1698 @@ 
+/*
+ * RTL8XXXU mac80211 USB driver - 8188f specific subdriver
+ *
+ * Copyright (c) 2022 Bitterblue Smith <rtl8821cerfe2@gmail.com>
+ *
+ * Portions copied from existing rtl8xxxu code:
+ * Copyright (c) 2014 - 2017 Jes Sorensen <Jes.Sorensen@gmail.com>
+ *
+ * Portions, notably calibration code:
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/wireless.h>
+#include <linux/firmware.h>
+#include <linux/moduleparam.h>
+#include <net/mac80211.h>
+#include "rtl8xxxu.h"
+#include "rtl8xxxu_regs.h"
+
+static struct rtl8xxxu_reg8val rtl8188f_mac_init_table[] = {
+	{0x024, 0xDF}, {0x025, 0x07}, {0x02B, 0x1C}, {0x283, 0x20},
+	{0x421, 0x0F}, {0x428, 0x0A}, {0x429, 0x10}, {0x430, 0x00},
+	{0x431, 0x00}, {0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04},
+	{0x435, 0x05}, {0x436, 0x07}, {0x437, 0x08}, {0x43C, 0x04},
+	{0x43D, 0x05}, {0x43E, 0x07}, {0x43F, 0x08}, {0x440, 0x5D},
+	{0x441, 0x01}, {0x442, 0x00}, {0x444, 0x10}, {0x445, 0x00},
+	{0x446, 0x00}, {0x447, 0x00}, {0x448, 0x00}, {0x449, 0xF0},
+	{0x44A, 0x0F}, {0x44B, 0x3E}, {0x44C, 0x10}, {0x44D, 0x00},
+	{0x44E, 0x00}, {0x44F, 0x00}, {0x450, 0x00}, {0x451, 0xF0},
+	{0x452, 0x0F}, {0x453, 0x00}, {0x456, 0x5E}, {0x460, 0x44},
+	{0x461, 0x44}, {0x4BC, 0xC0}, {0x4C8, 0xFF}, {0x4C9, 0x08},
+	{0x4CC, 0xFF}, {0x4CD, 0xFF}, {0x4CE, 0x01}, {0x500, 0x26},
+	{0x501, 0xA2}, {0x502, 0x2F}, {0x503, 0x00}, {0x504, 0x28},
+	{0x505, 0xA3}, {0x506, 0x5E}, {0x507, 0x00}, {0x508, 0x2B},
+	{0x509, 0xA4}, {0x50A, 0x5E}, {0x50B, 0x00}, {0x50C, 0x4F},
+	{0x50D, 0xA4}, {0x50E, 0x00}, {0x50F, 0x00}, {0x512, 0x1C},
+	{0x514, 0x0A}, {0x516, 0x0A}, {0x525, 0x4F}, {0x550, 0x10},
+	{0x551, 0x10}, {0x559, 0x02}, {0x55C, 0x28}, {0x55D, 0xFF},
+	{0x605, 0x30}, {0x608, 0x0E}, {0x609, 0x2A}, {0x620, 0xFF},
+	{0x621, 0xFF}, {0x622, 0xFF}, {0x623, 0xFF}, {0x624, 0xFF},
+	{0x625, 0xFF}, {0x626, 0xFF}, {0x627, 0xFF}, {0x638, 0x28},
+	{0x63C, 0x0A}, {0x63D, 0x0A}, {0x63E, 0x0E}, {0x63F, 0x0E},
+	{0x640, 0x40}, {0x642, 0x40}, {0x643, 0x00}, {0x652, 0xC8},
+	{0x66E, 0x05}, {0x700, 0x21}, {0x701, 0x43}, {0x702, 0x65},
+	{0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43}, {0x70A, 0x65},
+	{0x70B, 0x87},
+	{0xffff, 0xff},
+};
+
+static struct rtl8xxxu_reg32val rtl8188fu_phy_init_table[] = {
+	{0x800, 0x80045700}, {0x804, 0x00000001},
+	{0x808, 0x0000FC00}, {0x80C, 0x0000000A},
+	{0x810, 0x10001331}, {0x814, 0x020C3D10},
+	{0x818, 0x00200385}, {0x81C, 0x00000000},
+	{0x820, 0x01000100}, {0x824, 0x00390204},
+	{0x828, 0x00000000}, {0x82C, 0x00000000},
+	{0x830, 0x00000000}, {0x834, 0x00000000},
+	{0x838, 0x00000000}, {0x83C, 0x00000000},
+	{0x840, 0x00010000}, {0x844, 0x00000000},
+	{0x848, 0x00000000}, {0x84C, 0x00000000},
+	{0x850, 0x00030000}, {0x854, 0x00000000},
+	{0x858, 0x569A569A}, {0x85C, 0x569A569A},
+	{0x860, 0x00000130}, {0x864, 0x00000000},
+	{0x868, 0x00000000}, {0x86C, 0x27272700},
+	{0x870, 0x00000000}, {0x874, 0x25004000},
+	{0x878, 0x00000808}, {0x87C, 0x004F0201},
+	{0x880, 0xB0000B1E}, {0x884, 0x00000007},
+	{0x888, 0x00000000}, {0x88C, 0xCCC000C0},
+	{0x890, 0x00000800}, {0x894, 0xFFFFFFFE},
+	{0x898, 0x40302010}, {0x89C, 0x00706050},
+	{0x900, 0x00000000}, {0x904, 0x00000023},
+	{0x908, 0x00000000}, {0x90C, 0x81121111},
+	{0x910, 0x00000002}, {0x914, 0x00000201},
+	{0x948, 0x99000000}, {0x94C, 0x00000010},
+	{0x950, 0x20003000}, {0x954, 0x4A880000},
+	{0x958, 0x4BC5D87A}, {0x95C, 0x04EB9B79},
+	{0x96C, 0x00000003}, {0xA00, 0x00D047C8},
+	{0xA04, 0x80FF800C}, {0xA08, 0x8C898300},
+	{0xA0C, 0x2E7F120F}, {0xA10, 0x9500BB78},
+	{0xA14, 0x1114D028}, {0xA18, 0x00881117},
+	{0xA1C, 0x89140F00}, {0xA20, 0xD1D80000},
+	{0xA24, 0x5A7DA0BD}, {0xA28, 0x0000223B},
+	{0xA2C, 0x00D30000}, {0xA70, 0x101FBF00},
+	{0xA74, 0x00000007}, {0xA78, 0x00000900},
+	{0xA7C, 0x225B0606}, {0xA80, 0x218075B1},
+	{0xA84, 0x00120000}, {0xA88, 0x040C0000},
+	{0xA8C, 0x12345678}, {0xA90, 0xABCDEF00},
+	{0xA94, 0x001B1B89}, {0xA98, 0x05100000},
+	{0xA9C, 0x3F000000}, {0xAA0, 0x00000000},
+	{0xB2C, 0x00000000}, {0xC00, 0x48071D40},
+	{0xC04, 0x03A05611}, {0xC08, 0x000000E4},
+	{0xC0C, 0x6C6C6C6C}, {0xC10, 0x18800000},
+	{0xC14, 0x40000100}, {0xC18, 0x08800000},
+	{0xC1C, 0x40000100}, {0xC20, 0x00000000},
+	{0xC24, 0x00000000}, {0xC28, 0x00000000},
+	{0xC2C, 0x00000000}, {0xC30, 0x69E9CC4A},
+	{0xC34, 0x31000040}, {0xC38, 0x21688080},
+	{0xC3C, 0x00001714}, {0xC40, 0x1F78403F},
+	{0xC44, 0x00010036}, {0xC48, 0xEC020107},
+	{0xC4C, 0x007F037F}, {0xC50, 0x69553420},
+	{0xC54, 0x43BC0094}, {0xC58, 0x00013169},
+	{0xC5C, 0x00250492}, {0xC60, 0x00000000},
+	{0xC64, 0x7112848B}, {0xC68, 0x47C07BFF},
+	{0xC6C, 0x00000036}, {0xC70, 0x2C7F000D},
+	{0xC74, 0x020600DB}, {0xC78, 0x0000001F},
+	{0xC7C, 0x00B91612}, {0xC80, 0x390000E4},
+	{0xC84, 0x11F60000},
+	{0xC88, 0x40000100}, {0xC8C, 0x20200000},
+	{0xC90, 0x00091521}, {0xC94, 0x00000000},
+	{0xC98, 0x00121820}, {0xC9C, 0x00007F7F},
+	{0xCA0, 0x00000000}, {0xCA4, 0x000300A0},
+	{0xCA8, 0x00000000}, {0xCAC, 0x00000000},
+	{0xCB0, 0x00000000}, {0xCB4, 0x00000000},
+	{0xCB8, 0x00000000}, {0xCBC, 0x28000000},
+	{0xCC0, 0x00000000}, {0xCC4, 0x00000000},
+	{0xCC8, 0x00000000}, {0xCCC, 0x00000000},
+	{0xCD0, 0x00000000}, {0xCD4, 0x00000000},
+	{0xCD8, 0x64B22427}, {0xCDC, 0x00766932},
+	{0xCE0, 0x00222222}, {0xCE4, 0x10000000},
+	{0xCE8, 0x37644302}, {0xCEC, 0x2F97D40C},
+	{0xD00, 0x04030740}, {0xD04, 0x40020401},
+	{0xD08, 0x0000907F}, {0xD0C, 0x20010201},
+	{0xD10, 0xA0633333}, {0xD14, 0x3333BC53},
+	{0xD18, 0x7A8F5B6F}, {0xD2C, 0xCB979975},
+	{0xD30, 0x00000000}, {0xD34, 0x80608000},
+	{0xD38, 0x98000000}, {0xD3C, 0x40127353},
+	{0xD40, 0x00000000}, {0xD44, 0x00000000},
+	{0xD48, 0x00000000}, {0xD4C, 0x00000000},
+	{0xD50, 0x6437140A}, {0xD54, 0x00000000},
+	{0xD58, 0x00000282}, {0xD5C, 0x30032064},
+	{0xD60, 0x4653DE68}, {0xD64, 0x04518A3C},
+	{0xD68, 0x00002101}, {0xD6C, 0x2A201C16},
+	{0xD70, 0x1812362E}, {0xD74, 0x322C2220},
+	{0xD78, 0x000E3C24}, {0xE00, 0x2D2D2D2D},
+	{0xE04, 0x2D2D2D2D}, {0xE08, 0x0390272D},
+	{0xE10, 0x2D2D2D2D}, {0xE14, 0x2D2D2D2D},
+	{0xE18, 0x2D2D2D2D}, {0xE1C, 0x2D2D2D2D},
+	{0xE28, 0x00000000}, {0xE30, 0x1000DC1F},
+	{0xE34, 0x10008C1F}, {0xE38, 0x02140102},
+	{0xE3C, 0x681604C2}, {0xE40, 0x01007C00},
+	{0xE44, 0x01004800}, {0xE48, 0xFB000000},
+	{0xE4C, 0x000028D1}, {0xE50, 0x1000DC1F},
+	{0xE54, 0x10008C1F}, {0xE58, 0x02140102},
+	{0xE5C, 0x28160D05}, {0xE60, 0x00000008},
+	{0xE60, 0x021400A0}, {0xE64, 0x281600A0},
+	{0xE6C, 0x01C00010}, {0xE70, 0x01C00010},
+	{0xE74, 0x02000010}, {0xE78, 0x02000010},
+	{0xE7C, 0x02000010}, {0xE80, 0x02000010},
+	{0xE84, 0x01C00010}, {0xE88, 0x02000010},
+	{0xE8C, 0x01C00010}, {0xED0, 0x01C00010},
+	{0xED4, 0x01C00010}, {0xED8, 0x01C00010},
+	{0xEDC, 0x00000010}, {0xEE0, 0x00000010},
+	{0xEEC, 0x03C00010}, {0xF14, 0x00000003},
+	{0xF4C, 0x00000000}, {0xF00, 0x00000300},
+	{0xffff, 0xffffffff},
+};
+
+static struct rtl8xxxu_reg32val rtl8188f_agc_table[] = {
+	{0xC78, 0xFC000001}, {0xC78, 0xFB010001},
+	{0xC78, 0xFA020001}, {0xC78, 0xF9030001},
+	{0xC78, 0xF8040001}, {0xC78, 0xF7050001},
+	{0xC78, 0xF6060001}, {0xC78, 0xF5070001},
+	{0xC78, 0xF4080001}, {0xC78, 0xF3090001},
+	{0xC78, 0xF20A0001}, {0xC78, 0xF10B0001},
+	{0xC78, 0xF00C0001}, {0xC78, 0xEF0D0001},
+	{0xC78, 0xEE0E0001}, {0xC78, 0xED0F0001},
+	{0xC78, 0xEC100001}, {0xC78, 0xEB110001},
+	{0xC78, 0xEA120001}, {0xC78, 0xE9130001},
+	{0xC78, 0xE8140001}, {0xC78, 0xE7150001},
+	{0xC78, 0xE6160001}, {0xC78, 0xE5170001},
+	{0xC78, 0xE4180001}, {0xC78, 0xE3190001},
+	{0xC78, 0xE21A0001}, {0xC78, 0xE11B0001},
+	{0xC78, 0xE01C0001}, {0xC78, 0xC21D0001},
+	{0xC78, 0xC11E0001}, {0xC78, 0xC01F0001},
+	{0xC78, 0xA5200001}, {0xC78, 0xA4210001},
+	{0xC78, 0xA3220001}, {0xC78, 0xA2230001},
+	{0xC78, 0xA1240001}, {0xC78, 0xA0250001},
+	{0xC78, 0x65260001}, {0xC78, 0x64270001},
+	{0xC78, 0x63280001}, {0xC78, 0x62290001},
+	{0xC78, 0x612A0001}, {0xC78, 0x442B0001},
+	{0xC78, 0x432C0001}, {0xC78, 0x422D0001},
+	{0xC78, 0x412E0001}, {0xC78, 0x402F0001},
+	{0xC78, 0x21300001}, {0xC78, 0x20310001},
+	{0xC78, 0x05320001}, {0xC78, 0x04330001},
+	{0xC78, 0x03340001}, {0xC78, 0x02350001},
+	{0xC78, 0x01360001}, {0xC78, 0x00370001},
+	{0xC78, 0x00380001}, {0xC78, 0x00390001},
+	{0xC78, 0x003A0001}, {0xC78, 0x003B0001},
+	{0xC78, 0x003C0001}, {0xC78, 0x003D0001},
+	{0xC78, 0x003E0001}, {0xC78, 0x003F0001},
+	{0xC50, 0x69553422}, {0xC50, 0x69553420},
+	{0xffff, 0xffffffff}
+};
+
+static struct rtl8xxxu_rfregval rtl8188fu_radioa_init_table[] = {
+	{0x00, 0x00030000}, {0x08, 0x00008400},
+	{0x18, 0x00000407}, {0x19, 0x00000012},
+	{0x1B, 0x00001C6C},
+	{0x1E, 0x00080009}, {0x1F, 0x00000880},
+	{0x2F, 0x0001A060}, {0x3F, 0x00028000},
+	{0x42, 0x000060C0}, {0x57, 0x000D0000},
+	{0x58, 0x000C0160}, {0x67, 0x00001552},
+	{0x83, 0x00000000}, {0xB0, 0x000FF9F0},
+	{0xB1, 0x00022218}, {0xB2, 0x00034C00},
+	{0xB4, 0x0004484B}, {0xB5, 0x0000112A},
+	{0xB6, 0x0000053E}, {0xB7, 0x00010408},
+	{0xB8, 0x00010200}, {0xB9, 0x00080001},
+	{0xBA, 0x00040001}, {0xBB, 0x00000400},
+	{0xBF, 0x000C0000}, {0xC2, 0x00002400},
+	{0xC3, 0x00000009}, {0xC4, 0x00040C91},
+	{0xC5, 0x00099999}, {0xC6, 0x000000A3},
+	{0xC7, 0x0008F820}, {0xC8, 0x00076C06},
+	{0xC9, 0x00000000}, {0xCA, 0x00080000},
+	{0xDF, 0x00000180}, {0xEF, 0x000001A0},
+	{0x51, 0x000E8333}, {0x52, 0x000FAC2C},
+	{0x53, 0x00000103}, {0x56, 0x000517F0},
+	{0x35, 0x00000099}, {0x35, 0x00000199},
+	{0x35, 0x00000299}, {0x36, 0x00000064},
+	{0x36, 0x00008064}, {0x36, 0x00010064},
+	{0x36, 0x00018064}, {0x18, 0x00000C07},
+	{0x5A, 0x00048000}, {0x19, 0x000739D0},
+	{0x34, 0x0000ADD6}, {0x34, 0x00009DD3},
+	{0x34, 0x00008CF4}, {0x34, 0x00007CF1},
+	{0x34, 0x00006CEE}, {0x34, 0x00005CEB},
+	{0x34, 0x00004CCE}, {0x34, 0x00003CCB},
+	{0x34, 0x00002CC8}, {0x34, 0x00001C4B},
+	{0x34, 0x00000C48},
+	{0x00, 0x00030159}, {0x84, 0x00048000},
+	{0x86, 0x0000002A}, {0x87, 0x00000025},
+	{0x8E, 0x00065540}, {0x8F, 0x00088000},
+	{0xEF, 0x000020A0}, {0x3B, 0x000F0F00},
+	{0x3B, 0x000E0B00}, {0x3B, 0x000D0900},
+	{0x3B, 0x000C0700}, {0x3B, 0x000B0600},
+	{0x3B, 0x000A0400}, {0x3B, 0x00090200},
+	{0x3B, 0x00080000}, {0x3B, 0x0007BF00},
+	{0x3B, 0x00060B00}, {0x3B, 0x0005C900},
+	{0x3B, 0x00040700}, {0x3B, 0x00030600},
+	{0x3B, 0x0002D500}, {0x3B, 0x00010200},
+	{0x3B, 0x0000E000}, {0xEF, 0x000000A0},
+	{0xEF, 0x00000010}, {0x3B, 0x0000C0A8},
+	{0x3B, 0x00010400}, {0xEF, 0x00000000},
+	{0xEF, 0x00080000}, {0x30, 0x00010000},
+	{0x31, 0x0000000F}, {0x32, 0x00007EFE},
+	{0xEF, 0x00000000}, {0x00, 0x00010159},
+	{0x18, 0x0000FC07}, {0xFE, 0x00000000},
+	{0xFE, 0x00000000}, {0x1F, 0x00080003},
+	{0xFE, 0x00000000}, {0xFE, 0x00000000},
+	{0x1E, 0x00000001}, {0x1F, 0x00080000},
+	{0x00, 0x00033D95},
+	{0xff, 0xffffffff}
+};
+
+static struct rtl8xxxu_rfregval rtl8188fu_cut_b_radioa_init_table[] = {
+	{0x00, 0x00030000}, {0x08, 0x00008400},
+	{0x18, 0x00000407}, {0x19, 0x00000012},
+	{0x1B, 0x00001C6C},
+	{0x1E, 0x00080009}, {0x1F, 0x00000880},
+	{0x2F, 0x0001A060}, {0x3F, 0x00028000},
+	{0x42, 0x000060C0}, {0x57, 0x000D0000},
+	{0x58, 0x000C0160}, {0x67, 0x00001552},
+	{0x83, 0x00000000}, {0xB0, 0x000FF9F0},
+	{0xB1, 0x00022218}, {0xB2, 0x00034C00},
+	{0xB4, 0x0004484B}, {0xB5, 0x0000112A},
+	{0xB6, 0x0000053E}, {0xB7, 0x00010408},
+	{0xB8, 0x00010200}, {0xB9, 0x00080001},
+	{0xBA, 0x00040001}, {0xBB, 0x00000400},
+	{0xBF, 0x000C0000}, {0xC2, 0x00002400},
+	{0xC3, 0x00000009}, {0xC4, 0x00040C91},
+	{0xC5, 0x00099999}, {0xC6, 0x000000A3},
+	{0xC7, 0x0008F820}, {0xC8, 0x00076C06},
+	{0xC9, 0x00000000}, {0xCA, 0x00080000},
+	{0xDF, 0x00000180}, {0xEF, 0x000001A0},
+	{0x51, 0x000E8231}, {0x52, 0x000FAC2C},
+	{0x53, 0x00000141}, {0x56, 0x000517F0},
+	{0x35, 0x00000090}, {0x35, 0x00000190},
+	{0x35, 0x00000290}, {0x36, 0x00001064},
+	{0x36, 0x00009064}, {0x36, 0x00011064},
+	{0x36, 0x00019064}, {0x18, 0x00000C07},
+	{0x5A, 0x00048000}, {0x19, 0x000739D0},
+	{0x34, 0x0000ADD2}, {0x34, 0x00009DD0},
+	{0x34, 0x00008CF3}, {0x34, 0x00007CF0},
+	{0x34, 0x00006CED}, {0x34, 0x00005CD2},
+	{0x34, 0x00004CCF}, {0x34, 0x00003CCC},
+	{0x34, 0x00002CC9}, {0x34, 0x00001C4C},
+	{0x34, 0x00000C49},
+	{0x00, 0x00030159}, {0x84, 0x00048000},
+	{0x86, 0x0000002A}, {0x87, 0x00000025},
+	{0x8E, 0x00065540}, {0x8F, 0x00088000},
+	{0xEF, 0x000020A0}, {0x3B, 0x000F0F00},
+	{0x3B, 0x000E0B00}, {0x3B, 0x000D0900},
+	{0x3B, 0x000C0700}, {0x3B, 0x000B0600},
+	{0x3B, 0x000A0400}, {0x3B, 0x00090200},
+	{0x3B, 0x00080000}, {0x3B, 0x0007BF00},
+	{0x3B, 0x00060B00}, {0x3B, 0x0005C900},
+	{0x3B, 0x00040700}, {0x3B, 0x00030600},
+	{0x3B, 0x0002D500}, {0x3B, 0x00010200},
+	{0x3B, 0x0000E000}, {0xEF, 0x000000A0},
+	{0xEF, 0x00000010}, {0x3B, 0x0000C0A8},
+	{0x3B, 0x00010400}, {0xEF, 0x00000000},
+	{0xEF, 0x00080000}, {0x30, 0x00010000},
+	{0x31, 0x0000000F}, {0x32, 0x00007EFE},
+	{0xEF, 0x00000000}, {0x00, 0x00010159},
+	{0x18, 0x0000FC07}, {0xFE, 0x00000000},
+	{0xFE, 0x00000000}, {0x1F, 0x00080003},
+	{0xFE, 0x00000000}, {0xFE, 0x00000000},
+	{0x1E, 0x00000001}, {0x1F, 0x00080000},
+	{0x00, 0x00033D95},
+	{0xff, 0xffffffff}
+};
+
+static void rtl8xxxu_8188f_channel_to_group(int channel, int *group, int *cck_group)
+{
+	if (channel < 3)
+		*group = 0;
+	else if (channel < 6)
+		*group = 1;
+	else if (channel < 9)
+		*group = 2;
+	else if (channel < 12)
+		*group = 3;
+	else
+		*group = 4;
+
+	if (channel == 14)
+		*cck_group = 5;
+	else
+		*cck_group = *group;
+}
+
+static void
+rtl8188f_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40)
+{
+	u32 val32, ofdm, mcs;
+	u8 cck, ofdmbase, mcsbase;
+	int group, cck_group;
+
+	rtl8xxxu_8188f_channel_to_group(channel, &group, &cck_group);
+
+	cck = priv->cck_tx_power_index_A[cck_group];
+
+	val32 = rtl8xxxu_read32(priv, REG_TX_AGC_A_CCK1_MCS32);
+	val32 &= 0xffff00ff;
+	val32 |= (cck << 8);
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_CCK1_MCS32, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11);
+	val32 &= 0xff;
+	val32 |= ((cck << 8) | (cck << 16) | (cck << 24));
+	rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32);
+
+	ofdmbase = priv->ht40_1s_tx_power_index_A[group];
+	ofdmbase += priv->ofdm_tx_power_diff[0].a;
+	ofdm = ofdmbase | ofdmbase << 8 | ofdmbase << 16 | ofdmbase << 24;
+
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE18_06, ofdm);
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE54_24, ofdm);
+
+	mcsbase = priv->ht40_1s_tx_power_index_A[group];
+	if (ht40)
+		/* This diff is always 0 - not used in 8188FU. */
+		mcsbase += priv->ht40_tx_power_diff[0].a;
+	else
+		mcsbase += priv->ht20_tx_power_diff[0].a;
+	mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24;
+
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS03_MCS00, mcs);
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04, mcs);
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS11_MCS08, mcs);
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS15_MCS12, mcs);
+}
+
+/* A workaround to eliminate the 2400MHz, 2440MHz, 2480MHz spur of 8188F. */
+static void rtl8188f_spur_calibration(struct rtl8xxxu_priv *priv, u8 channel)
+{
+	const u32 frequencies[14 + 1] = {
+		[5] = 0xFCCD,
+		[6] = 0xFC4D,
+		[7] = 0xFFCD,
+		[8] = 0xFF4D,
+		[11] = 0xFDCD,
+		[13] = 0xFCCD,
+		[14] = 0xFF9A
+	};
+
+	const u32 reg_d40[14 + 1] = {
+		[5] = 0x06000000,
+		[6] = 0x00000600,
+		[13] = 0x06000000
+	};
+
+	const u32 reg_d44[14 + 1] = {
+		[11] = 0x04000000
+	};
+
+	const u32 reg_d4c[14 + 1] = {
+		[7] = 0x06000000,
+		[8] = 0x00000380,
+		[14] = 0x00180000
+	};
+
+	const u8 threshold = 0x16;
+	bool do_notch, hw_ctrl, sw_ctrl, hw_ctrl_s1, sw_ctrl_s1;
+	u32 val32, initial_gain, reg948;
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_RX_D_SYNC_PATH);
+	val32 |= GENMASK(28, 24);
+	rtl8xxxu_write32(priv, REG_OFDM0_RX_D_SYNC_PATH, val32);
+
+	/*enable notch filter */
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_RX_D_SYNC_PATH);
+	val32 |= BIT(9);
+	rtl8xxxu_write32(priv, REG_OFDM0_RX_D_SYNC_PATH, val32);
+
+	if (channel <= 14 && frequencies[channel] > 0) {
+		reg948 = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
+		hw_ctrl = reg948 & BIT(6);
+		sw_ctrl = !hw_ctrl;
+
+		if (hw_ctrl) {
+			val32 = rtl8xxxu_read32(priv, REG_FPGA0_XB_RF_INT_OE);
+			val32 &= GENMASK(5, 3);
+			hw_ctrl_s1 = val32 == BIT(3);
+		} else if (sw_ctrl) {
+			sw_ctrl_s1 = !(reg948 & BIT(9));
+		}
+
+		if (hw_ctrl_s1 || sw_ctrl_s1) {
+			initial_gain = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1);
+
+			/* Disable CCK block */
+			val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+			val32 &= ~FPGA_RF_MODE_CCK;
+			rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+			val32 = initial_gain & ~OFDM0_X_AGC_CORE1_IGI_MASK;
+			val32 |= 0x30;
+			rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32);
+
+			/* disable 3-wire */
+			rtl8xxxu_write32(priv, REG_FPGA0_ANALOG4, 0xccf000c0);
+
+			/* Setup PSD */
+			rtl8xxxu_write32(priv, REG_FPGA0_PSD_FUNC, frequencies[channel]);
+
+			/* Start PSD */
+			rtl8xxxu_write32(priv, REG_FPGA0_PSD_FUNC, 0x400000 | frequencies[channel]);
+
+			msleep(30);
+
+			do_notch = rtl8xxxu_read32(priv, REG_FPGA0_PSD_REPORT) >= threshold;
+
+			/* turn off PSD */
+			rtl8xxxu_write32(priv, REG_FPGA0_PSD_FUNC, frequencies[channel]);
+
+			/* enable 3-wire */
+			rtl8xxxu_write32(priv, REG_FPGA0_ANALOG4, 0xccc000c0);
+
+			/* Enable CCK block */
+			val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+			val32 |= FPGA_RF_MODE_CCK;
+			rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+			rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, initial_gain);
+
+			if (do_notch) {
+				rtl8xxxu_write32(priv, REG_OFDM1_CSI_FIX_MASK1, reg_d40[channel]);
+				rtl8xxxu_write32(priv, REG_OFDM1_CSI_FIX_MASK2, reg_d44[channel]);
+				rtl8xxxu_write32(priv, 0xd48, 0x0);
+				rtl8xxxu_write32(priv, 0xd4c, reg_d4c[channel]);
+
+				/*enable CSI mask */
+				val32 = rtl8xxxu_read32(priv, REG_OFDM1_CFO_TRACKING);
+				val32 |= BIT(28);
+				rtl8xxxu_write32(priv, REG_OFDM1_CFO_TRACKING, val32);
+
+				return;
+			}
+		}
+	}
+
+	/*disable CSI mask function */
+	val32 = rtl8xxxu_read32(priv, REG_OFDM1_CFO_TRACKING);
+	val32 &= ~BIT(28);
+	rtl8xxxu_write32(priv, REG_OFDM1_CFO_TRACKING, val32);
+}
+
+void rtl8188fu_config_channel(struct ieee80211_hw *hw)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	u32 val32;
+	u8 channel, subchannel;
+	bool sec_ch_above;
+
+	channel = (u8)hw->conf.chandef.chan->hw_value;
+
+	/* Set channel*/
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_MODE_AG);
+	val32 &= ~MODE_AG_CHANNEL_MASK;
+	val32 |= channel;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, val32);
+
+	/* Spur calibration */
+	rtl8188f_spur_calibration(priv, channel);
+
+	/* Set bandwidth mode */
+	if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_20 ||
+	    hw->conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
+	    hw->conf.chandef.width == NL80211_CHAN_WIDTH_40) {
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+		val32 &= ~FPGA_RF_MODE;
+		val32 |= hw->conf.chandef.width == NL80211_CHAN_WIDTH_40;
+		rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE);
+		val32 &= ~FPGA_RF_MODE;
+		val32 |= hw->conf.chandef.width == NL80211_CHAN_WIDTH_40;
+		rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32);
+
+		/* RXADC CLK */
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+		val32 |= GENMASK(10, 8);
+		rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+		/* TXDAC CLK */
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+		val32 |= BIT(14) | BIT(12);
+		val32 &= ~BIT(13);
+		rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+		/* small BW */
+		val32 = rtl8xxxu_read32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT);
+		val32 &= ~GENMASK(31, 30);
+		rtl8xxxu_write32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT, val32);
+
+		/* adc buffer clk */
+		val32 = rtl8xxxu_read32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT);
+		val32 &= ~BIT(29);
+		val32 |= BIT(28);
+		rtl8xxxu_write32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT, val32);
+
+		/* adc buffer clk */
+		val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_RX_AFE);
+		val32 &= ~BIT(29);
+		val32 |= BIT(28);
+		rtl8xxxu_write32(priv, REG_OFDM0_XA_RX_AFE, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_OFDM_RX_DFIR);
+		val32 &= ~BIT(19);
+		rtl8xxxu_write32(priv, REG_OFDM_RX_DFIR, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_OFDM_RX_DFIR);
+		val32 &= ~GENMASK(23, 20);
+		val32 |= BIT(21);
+		if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_20 ||
+		    hw->conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT)
+			val32 |= BIT(20);
+		else if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40)
+			val32 |= BIT(22);
+		rtl8xxxu_write32(priv, REG_OFDM_RX_DFIR, val32);
+
+		if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40) {
+			if (hw->conf.chandef.center_freq1 >
+			    hw->conf.chandef.chan->center_freq) {
+				sec_ch_above = 1;
+				channel += 2;
+			} else {
+				sec_ch_above = 0;
+				channel -= 2;
+			}
+
+			/* Set Control channel to upper or lower. */
+			val32 = rtl8xxxu_read32(priv, REG_CCK0_SYSTEM);
+			val32 &= ~CCK0_SIDEBAND;
+			if (!sec_ch_above)
+				val32 |= CCK0_SIDEBAND;
+			rtl8xxxu_write32(priv, REG_CCK0_SYSTEM, val32);
+
+			val32 = rtl8xxxu_read32(priv, REG_DATA_SUBCHANNEL);
+			/*
+			 * It doesn't make sense to clear only bits 0-3,
+			 * but this is what the vendor driver does.
+			 */
+			val32 &= ~GENMASK(3, 0);
+			if (sec_ch_above)
+				subchannel = (2 << 4) | 2;
+			else
+				subchannel = (1 << 4) | 1;
+			val32 |= subchannel;
+			rtl8xxxu_write32(priv, REG_DATA_SUBCHANNEL, val32);
+
+			val32 = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET);
+			val32 &= ~RSR_RSC_BANDWIDTH_40M;
+			rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, val32);
+		}
+
+		/* RF TRX_BW */
+		val32 = channel;
+		if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_20 ||
+		    hw->conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT)
+			val32 |= MODE_AG_BW_20MHZ_8723B;
+		else if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40)
+			val32 |= MODE_AG_BW_40MHZ_8723B;
+		rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, val32);
+
+		/* FILTER BW&RC Corner (ACPR) */
+		if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_20 ||
+		    hw->conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT)
+			val32 = 0x00065;
+		else if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40)
+			val32 = 0x00025;
+		rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RXG_MIX_SWBW, val32);
+
+		if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_20 ||
+		    hw->conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT)
+			val32 = 0x0;
+		else if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40)
+			val32 = 0x01000;
+		rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RX_BB2, val32);
+
+		/* RC Corner */
+		rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00140);
+		rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RX_G2, 0x01c6c);
+	}
+}
+
+void rtl8188fu_init_aggregation(struct rtl8xxxu_priv *priv)
+{
+	u8 agg_ctrl, rxdma_mode, usb_tx_agg_desc_num = 6;
+	u32 agg_rx, val32;
+
+	/* TX aggregation */
+	val32 = rtl8xxxu_read32(priv, REG_DWBCN0_CTRL_8188F);
+	val32 &= ~(0xf << 4);
+	val32 |= usb_tx_agg_desc_num << 4;
+	rtl8xxxu_write32(priv, REG_DWBCN0_CTRL_8188F, val32);
+	rtl8xxxu_write8(priv, REG_DWBCN1_CTRL_8723B, usb_tx_agg_desc_num << 1);
+
+	/* RX aggregation */
+	agg_ctrl = rtl8xxxu_read8(priv, REG_TRXDMA_CTRL);
+	agg_ctrl &= ~TRXDMA_CTRL_RXDMA_AGG_EN;
+
+	agg_rx = rtl8xxxu_read32(priv, REG_RXDMA_AGG_PG_TH);
+	agg_rx &= ~RXDMA_USB_AGG_ENABLE;
+	agg_rx &= ~0xFF0F; /* reset agg size and timeout */
+
+	rxdma_mode = rtl8xxxu_read8(priv, REG_RXDMA_PRO_8723B);
+	rxdma_mode &= ~BIT(1);
+
+	rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl);
+	rtl8xxxu_write32(priv, REG_RXDMA_AGG_PG_TH, agg_rx);
+	rtl8xxxu_write8(priv, REG_RXDMA_PRO_8723B, rxdma_mode);
+}
+
+static void rtl8188fu_init_statistics(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+
+	/* Time duration for NHM unit: 4us, 0xc350=200ms */
+	rtl8xxxu_write16(priv, REG_NHM_TIMER_8723B + 2, 0xc350);
+	rtl8xxxu_write16(priv, REG_NHM_TH9_TH10_8723B + 2, 0xffff);
+	rtl8xxxu_write32(priv, REG_NHM_TH3_TO_TH0_8723B, 0xffffff50);
+	rtl8xxxu_write32(priv, REG_NHM_TH7_TO_TH4_8723B, 0xffffffff);
+	/* TH8 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 |= 0xff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+	/* Enable CCK */
+	val32 = rtl8xxxu_read32(priv, REG_NHM_TH9_TH10_8723B);
+	val32 &= ~(BIT(8) | BIT(9) | BIT(10));
+	val32 |= BIT(8);
+	rtl8xxxu_write32(priv, REG_NHM_TH9_TH10_8723B, val32);
+	/* Max power amongst all RX antennas */
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_FA_RSTC);
+	val32 |= BIT(7);
+	rtl8xxxu_write32(priv, REG_OFDM0_FA_RSTC, val32);
+}
+
+static int rtl8188fu_parse_efuse(struct rtl8xxxu_priv *priv)
+{
+	struct rtl8188fu_efuse *efuse = &priv->efuse_wifi.efuse8188fu;
+	int i;
+
+	if (efuse->rtl_id != cpu_to_le16(0x8129))
+		return -EINVAL;
+
+	ether_addr_copy(priv->mac_addr, efuse->mac_addr);
+
+	memcpy(priv->cck_tx_power_index_A, efuse->tx_power_index_A.cck_base,
+	       sizeof(efuse->tx_power_index_A.cck_base));
+	/*
+	 * Efuse is empty for path B, so copy in values from path A
+	 */
+	memcpy(priv->cck_tx_power_index_B, efuse->tx_power_index_A.cck_base,
+	       sizeof(efuse->tx_power_index_A.cck_base));
+
+	memcpy(priv->ht40_1s_tx_power_index_A,
+	       efuse->tx_power_index_A.ht40_base,
+	       sizeof(efuse->tx_power_index_A.ht40_base));
+	memcpy(priv->ht40_1s_tx_power_index_B,
+	       efuse->tx_power_index_A.ht40_base,
+	       sizeof(efuse->tx_power_index_A.ht40_base));
+
+	priv->ofdm_tx_power_diff[0].a = efuse->tx_power_index_A.ht20_ofdm_1s_diff.a;
+	priv->ht20_tx_power_diff[0].a = efuse->tx_power_index_A.ht20_ofdm_1s_diff.b;
+
+	priv->xtalk = efuse->xtal_k & 0x3f;
+
+	dev_info(&priv->udev->dev, "Vendor: %.7s\n", efuse->vendor_name);
+	dev_info(&priv->udev->dev, "Product: %.7s\n", efuse->device_name);
+
+	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) {
+		unsigned char *raw = priv->efuse_wifi.raw;
+
+		dev_info(&priv->udev->dev,
+			 "%s: dumping efuse (0x%02zx bytes):\n",
+			 __func__, sizeof(struct rtl8188fu_efuse));
+		for (i = 0; i < sizeof(struct rtl8188fu_efuse); i += 8)
+			dev_info(&priv->udev->dev, "%02x: %8ph\n", i, &raw[i]);
+	}
+
+	return 0;
+}
+
+static int rtl8188fu_load_firmware(struct rtl8xxxu_priv *priv)
+{
+	char *fw_name;
+	int ret;
+
+	fw_name = "rtlwifi/rtl8188fufw.bin";
+
+	ret = rtl8xxxu_load_firmware(priv, fw_name);
+
+	return ret;
+}
+
+static void rtl8188fu_init_phy_bb(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u16 val16;
+	u32 val32;
+
+	/* Enable BB and RF */
+	val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+	val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB | SYS_FUNC_DIO_RF;
+	rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
+
+	/*
+	 * Per vendor driver, run power sequence before init of RF
+	 */
+	val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB;
+	rtl8xxxu_write8(priv, REG_RF_CTRL, val8);
+
+	usleep_range(10, 20);
+
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_IQADJ_G1, 0x780);
+
+	val8 = SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB | SYS_FUNC_USBA | SYS_FUNC_USBD;
+	rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
+
+	rtl8xxxu_init_phy_regs(priv, rtl8188fu_phy_init_table);
+	rtl8xxxu_init_phy_regs(priv, rtl8188f_agc_table);
+
+	val32 = rtl8xxxu_read32(priv, REG_AFE_XTAL_CTRL);
+	val8 = priv->xtalk;
+	val32 &= ~0x007FF800;
+	val32 |= ((val8 | (val8 << 6)) << 11);
+	rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, val32);
+}
+
+static int rtl8188fu_init_phy_rf(struct rtl8xxxu_priv *priv)
+{
+	int ret;
+
+	if (priv->chip_cut == 1)
+		ret = rtl8xxxu_init_phy_rf(priv, rtl8188fu_cut_b_radioa_init_table, RF_A);
+	else
+		ret = rtl8xxxu_init_phy_rf(priv, rtl8188fu_radioa_init_table, RF_A);
+
+	return ret;
+}
+
+static void rtl8188f_phy_lc_calibrate(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+	u32 rf_amode, lstf;
+	int i;
+
+	/* Check continuous TX and Packet TX */
+	lstf = rtl8xxxu_read32(priv, REG_OFDM1_LSTF);
+
+	if (lstf & OFDM_LSTF_MASK) {
+		/* Disable all continuous TX */
+		val32 = lstf & ~OFDM_LSTF_MASK;
+		rtl8xxxu_write32(priv, REG_OFDM1_LSTF, val32);
+	} else {
+		/*  Deal with Packet TX case */
+		/*  block all queues */
+		rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
+	}
+
+	/* Read original RF mode Path A */
+	rf_amode = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_AC);
+
+	/* Start LC calibration */
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, rf_amode | 0x08000);
+
+	for (i = 0; i < 100; i++) {
+		if ((rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_MODE_AG) & 0x08000) == 0)
+			break;
+		msleep(10);
+	}
+
+	if (i == 100)
+		dev_warn(&priv->udev->dev, "LC calibration timed out.\n");
+
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, rf_amode);
+
+	/* Restore original parameters */
+	if (lstf & OFDM_LSTF_MASK)
+		rtl8xxxu_write32(priv, REG_OFDM1_LSTF, lstf);
+	else /*  Deal with Packet TX case */
+		rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
+}
+
+static int rtl8188fu_iqk_path_a(struct rtl8xxxu_priv *priv, u32 *lok_result)
+{
+	u32 reg_eac, reg_e94, reg_e9c, val32;
+	int result = 0;
+
+	/*
+	 * Leave IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/*
+	 * Enable path A PA in TX IQK mode
+	 */
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
+	val32 |= 0x80000;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x20000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0x07ff7);
+
+	/* PA,PAD gain adjust */
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x980);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x5102a);
+
+	/* enter IQK mode */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	val32 |= 0x80800000;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/* path-A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x821403ff);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160000);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(25);
+
+	/*
+	 * Leave IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x180);
+
+	/* save LOK result */
+	*lok_result = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_TXM_IDAC);
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
+	reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
+
+	if (!(reg_eac & BIT(28)) &&
+	    ((reg_e94 & 0x03ff0000) != 0x01420000) &&
+	    ((reg_e9c & 0x03ff0000) != 0x00420000))
+		result |= 0x01;
+
+	return result;
+}
+
+static int rtl8188fu_rx_iqk_path_a(struct rtl8xxxu_priv *priv, u32 lok_result)
+{
+	u32 reg_ea4, reg_eac, reg_e94, reg_e9c, val32;
+	int result = 0;
+
+	/*
+	 * Leave IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/*
+	 * Enable path A PA in TX IQK mode
+	 */
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
+	val32 |= 0x80000;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf1173);
+
+	/* PA,PAD gain adjust */
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x980);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x5102a);
+
+	/*
+	 * Enter IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	val32 |= 0x80800000;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/*
+	 * Tx IQK setting
+	 */
+	rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	/* path-A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x10008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x30008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160fff);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160000);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(25);
+
+	/*
+	 * Leave IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x180);
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
+	reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
+
+	if (!(reg_eac & BIT(28)) &&
+	    ((reg_e94 & 0x03ff0000) != 0x01420000) &&
+	    ((reg_e9c & 0x03ff0000) != 0x00420000))
+		result |= 0x01;
+	else	/* If TX not OK, ignore RX */
+		goto out;
+
+	val32 = 0x80007c00 | (reg_e94 & 0x3ff0000) |
+		((reg_e9c & 0x3ff0000) >> 16);
+	rtl8xxxu_write32(priv, REG_TX_IQK, val32);
+
+	/*
+	 * Modify RX IQK mode table
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
+	val32 |= 0x80000;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7ff2);
+
+	/*
+	 * PA, PAD setting
+	 */
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x980);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x51000);
+
+	/*
+	 * Enter IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	val32 |= 0x80800000;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/*
+	 * RX IQK setting
+	 */
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	/* path-A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x30008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x10008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160000);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x281613ff);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(25);
+
+	/*
+	 * Leave IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x180);
+
+	/* reload LOK value */
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXM_IDAC, lok_result);
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2);
+
+	if (!(reg_eac & BIT(27)) &&
+	    ((reg_ea4 & 0x03ff0000) != 0x01320000) &&
+	    ((reg_eac & 0x03ff0000) != 0x00360000))
+		result |= 0x02;
+
+out:
+	return result;
+}
+
+static void rtl8188fu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
+				      int result[][8], int t)
+{
+	struct device *dev = &priv->udev->dev;
+	u32 i, val32, rx_initial_gain, lok_result;
+	u32 path_sel_bb, path_sel_rf;
+	int path_a_ok;
+	int retry = 2;
+	static const u32 adda_regs[RTL8XXXU_ADDA_REGS] = {
+		REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH,
+		REG_RX_WAIT_CCA, REG_TX_CCK_RFON,
+		REG_TX_CCK_BBON, REG_TX_OFDM_RFON,
+		REG_TX_OFDM_BBON, REG_TX_TO_RX,
+		REG_TX_TO_TX, REG_RX_CCK,
+		REG_RX_OFDM, REG_RX_WAIT_RIFS,
+		REG_RX_TO_RX, REG_STANDBY,
+		REG_SLEEP, REG_PMPD_ANAEN
+	};
+	static const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = {
+		REG_TXPAUSE, REG_BEACON_CTRL,
+		REG_BEACON_CTRL_1, REG_GPIO_MUXCFG
+	};
+	static const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = {
+		REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR,
+		REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B,
+		REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE,
+		REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE
+	};
+
+	/*
+	 * Note: IQ calibration must be performed after loading
+	 *       PHY_REG.txt , and radio_a, radio_b.txt
+	 */
+
+	rx_initial_gain = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1);
+
+	if (t == 0) {
+		/* Save ADDA parameters, turn Path A ADDA on */
+		rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup,
+				   RTL8XXXU_ADDA_REGS);
+		rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
+		rtl8xxxu_save_regs(priv, iqk_bb_regs,
+				   priv->bb_backup, RTL8XXXU_BB_REGS);
+	}
+
+	rtl8xxxu_path_adda_on(priv, adda_regs, true);
+
+	if (t == 0) {
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_HSSI_PARM1);
+		if (val32 & FPGA0_HSSI_PARM1_PI)
+			priv->pi_enabled = 1;
+	}
+
+	/* save RF path */
+	path_sel_bb = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
+	path_sel_rf = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_S0S1);
+
+	/* BB setting */
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600);
+	rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4);
+	rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x25204000);
+
+	/* MAC settings */
+	val32 = rtl8xxxu_read32(priv, REG_TX_PTCL_CTRL);
+	val32 |= 0x00ff0000;
+	rtl8xxxu_write32(priv, REG_TX_PTCL_CTRL, val32);
+
+	/* IQ calibration setting */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0xff;
+	val32 |= 0x80800000;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+	rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	for (i = 0; i < retry; i++) {
+		path_a_ok = rtl8188fu_iqk_path_a(priv, &lok_result);
+		if (path_a_ok == 0x01) {
+			val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+			val32 &= 0xff;
+			rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+			val32 = rtl8xxxu_read32(priv,
+						REG_TX_POWER_BEFORE_IQK_A);
+			result[t][0] = (val32 >> 16) & 0x3ff;
+
+			val32 = rtl8xxxu_read32(priv,
+						REG_TX_POWER_AFTER_IQK_A);
+			result[t][1] = (val32 >> 16) & 0x3ff;
+			break;
+		}
+	}
+
+	for (i = 0; i < retry; i++) {
+		path_a_ok = rtl8188fu_rx_iqk_path_a(priv, lok_result);
+		if (path_a_ok == 0x03) {
+			val32 = rtl8xxxu_read32(priv,
+						REG_RX_POWER_BEFORE_IQK_A_2);
+			result[t][2] = (val32 >> 16) & 0x3ff;
+
+			val32 = rtl8xxxu_read32(priv,
+						REG_RX_POWER_AFTER_IQK_A_2);
+			result[t][3] = (val32 >> 16) & 0x3ff;
+			break;
+		}
+	}
+
+	if (!path_a_ok)
+		dev_dbg(dev, "%s: Path A IQK failed!\n", __func__);
+
+	/* Back to BB mode, load original value */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0xff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	if (t) {
+		if (!priv->pi_enabled) {
+			/*
+			 * Switch back BB to SI mode after finishing
+			 * IQ Calibration
+			 */
+			val32 = 0x01000000;
+			rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, val32);
+			rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM1, val32);
+		}
+
+		/* Reload ADDA power saving parameters */
+		rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup,
+				      RTL8XXXU_ADDA_REGS);
+
+		/* Reload MAC parameters */
+		rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
+
+		/* Reload BB parameters */
+		rtl8xxxu_restore_regs(priv, iqk_bb_regs,
+				      priv->bb_backup, RTL8XXXU_BB_REGS);
+
+		/* Reload RF path */
+		rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel_bb);
+		rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_S0S1, path_sel_rf);
+
+		/* Restore RX initial gain */
+		val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1);
+		val32 &= 0xffffff00;
+		val32 |= 0x50;
+		rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32);
+		rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, rx_initial_gain & 0xff);
+
+		/* Load 0xe30 IQC default value */
+		rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00);
+		rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00);
+	}
+}
+
+static void rtl8188fu_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	int result[4][8];	/* last is final result */
+	int i, candidate;
+	bool path_a_ok, path_b_ok;
+	u32 reg_e94, reg_e9c, reg_ea4, reg_eac;
+	u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc;
+	s32 reg_tmp = 0;
+	bool simu;
+	u32 path_sel_bb, path_sel_rf;
+
+	/* Save RF path */
+	path_sel_bb = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
+	path_sel_rf = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_S0S1);
+
+	memset(result, 0, sizeof(result));
+	candidate = -1;
+
+	path_a_ok = false;
+	path_b_ok = false;
+
+	for (i = 0; i < 3; i++) {
+		rtl8188fu_phy_iqcalibrate(priv, result, i);
+
+		if (i == 1) {
+			simu = rtl8xxxu_gen2_simularity_compare(priv, result, 0, 1);
+			if (simu) {
+				candidate = 0;
+				break;
+			}
+		}
+
+		if (i == 2) {
+			simu = rtl8xxxu_gen2_simularity_compare(priv, result, 0, 2);
+			if (simu) {
+				candidate = 0;
+				break;
+			}
+
+			simu = rtl8xxxu_gen2_simularity_compare(priv, result, 1, 2);
+			if (simu) {
+				candidate = 1;
+			} else {
+				for (i = 0; i < 8; i++)
+					reg_tmp += result[3][i];
+
+				if (reg_tmp)
+					candidate = 3;
+				else
+					candidate = -1;
+			}
+		}
+	}
+
+	for (i = 0; i < 4; i++) {
+		reg_e94 = result[i][0];
+		reg_e9c = result[i][1];
+		reg_ea4 = result[i][2];
+		reg_eac = result[i][3];
+		reg_eb4 = result[i][4];
+		reg_ebc = result[i][5];
+		reg_ec4 = result[i][6];
+		reg_ecc = result[i][7];
+	}
+
+	if (candidate >= 0) {
+		reg_e94 = result[candidate][0];
+		priv->rege94 =  reg_e94;
+		reg_e9c = result[candidate][1];
+		priv->rege9c = reg_e9c;
+		reg_ea4 = result[candidate][2];
+		reg_eac = result[candidate][3];
+		reg_eb4 = result[candidate][4];
+		priv->regeb4 = reg_eb4;
+		reg_ebc = result[candidate][5];
+		priv->regebc = reg_ebc;
+		reg_ec4 = result[candidate][6];
+		reg_ecc = result[candidate][7];
+		dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate);
+		dev_dbg(dev,
+			"%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x ecc=%x\n",
+			__func__, reg_e94, reg_e9c,
+			reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc);
+		path_a_ok = true;
+		path_b_ok = true;
+	} else {
+		reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100;
+		reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0;
+	}
+
+	if (reg_e94 && candidate >= 0)
+		rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result,
+					   candidate, (reg_ea4 == 0));
+
+	rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg,
+			   priv->bb_recovery_backup, RTL8XXXU_BB_REGS);
+
+	rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel_bb);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_S0S1, path_sel_rf);
+}
+
+static void rtl8188f_disabled_to_emu(struct rtl8xxxu_priv *priv)
+{
+	u16 val8;
+
+	/*0x04[12:11] = 2b'01enable WL suspend*/
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 &= ~((APS_FSMCO_PCIE | APS_FSMCO_HW_SUSPEND) >> 8);
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	/* 0xC4[4] <= 1, turn off USB APHY LDO under suspend mode*/
+	val8 = rtl8xxxu_read8(priv, 0xc4);
+	val8 &= ~BIT(4);
+	rtl8xxxu_write8(priv, 0xc4, val8);
+}
+
+static int rtl8188f_emu_to_active(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u32 val32;
+	int count, ret = 0;
+
+	/* Disable SW LPS */
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 &= ~(APS_FSMCO_SW_LPS >> 8);
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	/* wait till 0x04[17] = 1 power ready*/
+	for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+		val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+		if (val32 & BIT(17))
+			break;
+
+		udelay(10);
+	}
+
+	if (!count) {
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	/* Disable HWPDN */
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 &= ~(APS_FSMCO_HW_POWERDOWN >> 8);
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	/* Disable WL suspend */
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 &= ~(APS_FSMCO_HW_SUSPEND >> 8);
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	/* set, then poll until 0 */
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 |= APS_FSMCO_MAC_ENABLE >> 8;
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+		val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+		if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) {
+			ret = 0;
+			break;
+		}
+		udelay(10);
+	}
+
+	if (!count) {
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	/*0x27<=35 to reduce RF noise*/
+	val8 = rtl8xxxu_write8(priv, 0x27, 0x35);
+exit:
+	return ret;
+}
+
+static int rtl8188fu_active_to_emu(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u32 val32;
+	int count, ret = 0;
+
+	/* Turn off RF */
+	rtl8xxxu_write8(priv, REG_RF_CTRL, 0);
+
+	/*0x4C[23] = 0x4E[7] = 0, switch DPDT_SEL_P output from register 0x65[2] */
+	val8 = rtl8xxxu_read8(priv, 0x4e);
+	val8 &= ~BIT(7);
+	rtl8xxxu_write8(priv, 0x4e, val8);
+
+	/*0x27 <= 34, xtal_qsel = 0 to xtal bring up*/
+	rtl8xxxu_write8(priv, 0x27, 0x34);
+
+	/*0x04[9] = 1 turn off MAC by HW state machine*/
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 |= APS_FSMCO_MAC_OFF >> 8;
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+		val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+		if ((val32 & APS_FSMCO_MAC_OFF) == 0) {
+			ret = 0;
+			break;
+		}
+		udelay(10);
+	}
+
+	if (!count) {
+		ret = -EBUSY;
+		goto exit;
+	}
+
+exit:
+	return ret;
+}
+
+static int rtl8188fu_emu_to_disabled(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+
+	/*0x04[12:11] = 2b'01 enable WL suspend*/
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 &= ~((APS_FSMCO_PCIE | APS_FSMCO_HW_SUSPEND) >> 8);
+	val8 |= APS_FSMCO_HW_SUSPEND >> 8;
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	/* 0xC4[4] <= 1, turn off USB APHY LDO under suspend mode*/
+	val8 = rtl8xxxu_read8(priv, 0xc4);
+	val8 |= BIT(4);
+	rtl8xxxu_write8(priv, 0xc4, val8);
+
+	return 0;
+}
+
+static int rtl8188fu_active_to_lps(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	u8 val8;
+	u16 val16;
+	u32 val32;
+	int retry, retval;
+
+	/*set RPWM IMR*/
+	val8 = rtl8xxxu_read8(priv, REG_FTIMR + 1);
+	val8 |= IMR0_CPWM >> 8;
+	rtl8xxxu_write8(priv, REG_FTIMR + 1, val8);
+
+	/*Tx Pause*/
+	rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
+
+	retry = 100;
+	retval = -EBUSY;
+	/*
+	 * Poll 32 bit wide REG_SCH_TX_CMD for 0x00000000 to ensure no TX is pending.
+	 */
+	do {
+		val32 = rtl8xxxu_read32(priv, REG_SCH_TX_CMD);
+		if (!val32) {
+			retval = 0;
+			break;
+		}
+	} while (retry--);
+
+	if (!retry) {
+		dev_warn(dev, "Failed to flush TX queue\n");
+		retval = -EBUSY;
+		goto out;
+	}
+
+	/* Disable CCK and OFDM, clock gated */
+	val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
+	val8 &= ~SYS_FUNC_BBRSTB;
+	rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
+
+	udelay(2);
+
+	/*Whole BB is reset*/
+	val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
+	val8 &= ~SYS_FUNC_BB_GLB_RSTN;
+	rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
+
+	/* Reset MAC TRX */
+	val16 = rtl8xxxu_read16(priv, REG_CR);
+	val16 |= 0x3f;
+	val16 &= ~(CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | CR_SECURITY_ENABLE);
+	rtl8xxxu_write16(priv, REG_CR, val16);
+
+	/*Respond TxOK to scheduler*/
+	val8 = rtl8xxxu_read8(priv, REG_DUAL_TSF_RST);
+	val8 |= DUAL_TSF_TX_OK;
+	rtl8xxxu_write8(priv, REG_DUAL_TSF_RST, val8);
+
+out:
+	return retval;
+}
+
+static int rtl8188fu_power_on(struct rtl8xxxu_priv *priv)
+{
+	u16 val16;
+	int ret;
+
+	rtl8188f_disabled_to_emu(priv);
+
+	ret = rtl8188f_emu_to_active(priv);
+	if (ret)
+		goto exit;
+
+	rtl8xxxu_write8(priv, REG_CR, 0);
+
+	val16 = rtl8xxxu_read16(priv, REG_CR);
+
+	val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE |
+		 CR_TXDMA_ENABLE | CR_RXDMA_ENABLE |
+		 CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE |
+		 CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE);
+	rtl8xxxu_write16(priv, REG_CR, val16);
+
+exit:
+	return ret;
+}
+
+void rtl8188fu_power_off(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u16 val16;
+
+	rtl8xxxu_flush_fifo(priv);
+
+	val16 = rtl8xxxu_read16(priv, REG_GPIO_MUXCFG);
+	val16 &= ~BIT(12);
+	rtl8xxxu_write16(priv, REG_GPIO_MUXCFG, val16);
+
+	rtl8xxxu_write32(priv, REG_HISR0, 0xFFFFFFFF);
+	rtl8xxxu_write32(priv, REG_HISR1, 0xFFFFFFFF);
+
+	/*Stop Tx Report Timer. 0x4EC[Bit1]=b'0 */
+	val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL);
+	val8 &= ~TX_REPORT_CTRL_TIMER_ENABLE;
+	rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8);
+
+	/* Turn off RF */
+	rtl8xxxu_write8(priv, REG_RF_CTRL, 0x00);
+
+	/* Reset Firmware if running in RAM */
+	if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL)
+		rtl8xxxu_firmware_self_reset(priv);
+
+	rtl8188fu_active_to_lps(priv);
+
+	/* Reset MCU */
+	val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+	val16 &= ~SYS_FUNC_CPU_ENABLE;
+	rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
+
+	/* Reset MCU ready status */
+	rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00);
+
+	rtl8188fu_active_to_emu(priv);
+	rtl8188fu_emu_to_disabled(priv);
+}
+
+static void rtl8188f_enable_rf(struct rtl8xxxu_priv *priv)
+{
+#define PPG_BB_GAIN_2G_TXA_OFFSET_8188F 0xee
+#define PPG_BB_GAIN_2G_TX_OFFSET_MASK 0x0f
+
+	u32 val32;
+	u8 pg_pwrtrim = 0xff, val8;
+	s8 bb_gain;
+
+	/* Somehow this is not found in the efuse we read earlier. */
+	rtl8xxxu_read_efuse8(priv, PPG_BB_GAIN_2G_TXA_OFFSET_8188F, &pg_pwrtrim);
+
+	if (pg_pwrtrim != 0xff) {
+		bb_gain = pg_pwrtrim & PPG_BB_GAIN_2G_TX_OFFSET_MASK;
+
+		if (bb_gain == PPG_BB_GAIN_2G_TX_OFFSET_MASK)
+			bb_gain = 0;
+		else if (bb_gain & 1)
+			bb_gain = bb_gain >> 1;
+		else
+			bb_gain = -(bb_gain >> 1);
+
+		val8 = abs(bb_gain);
+		if (bb_gain > 0)
+			val8 |= BIT(5);
+
+		val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_55);
+		val32 &= ~0xfc000;
+		val32 |= val8 << 14;
+		rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_55, val32);
+	}
+
+	rtl8xxxu_write8(priv, REG_RF_CTRL, RF_ENABLE | RF_RSTB | RF_SDMRSTB);
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE);
+	val32 &= ~(OFDM_RF_PATH_RX_MASK | OFDM_RF_PATH_TX_MASK);
+	val32 |= OFDM_RF_PATH_RX_A | OFDM_RF_PATH_TX_A;
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32);
+
+	rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
+}
+
+static void rtl8188f_disable_rf(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE);
+	val32 &= ~OFDM_RF_PATH_TX_MASK;
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32);
+
+	/* Power down RF module */
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0);
+}
+
+static void rtl8188f_usb_quirks(struct rtl8xxxu_priv *priv)
+{
+	u16 val16;
+	u32 val32;
+
+	val16 = rtl8xxxu_read16(priv, REG_CR);
+	val16 |= (CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE);
+	rtl8xxxu_write16(priv, REG_CR, val16);
+
+	val32 = rtl8xxxu_read32(priv, REG_TXDMA_OFFSET_CHK);
+	val32 |= TXDMA_OFFSET_DROP_DATA_EN;
+	rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, val32);
+}
+
+struct rtl8xxxu_fileops rtl8188fu_fops = {
+	.parse_efuse = rtl8188fu_parse_efuse,
+	.load_firmware = rtl8188fu_load_firmware,
+	.power_on = rtl8188fu_power_on,
+	.power_off = rtl8188fu_power_off,
+	.reset_8051 = rtl8xxxu_reset_8051,
+	.llt_init = rtl8xxxu_auto_llt_table,
+	.init_phy_bb = rtl8188fu_init_phy_bb,
+	.init_phy_rf = rtl8188fu_init_phy_rf,
+	.phy_init_antenna_selection = rtl8723bu_phy_init_antenna_selection,
+	.phy_lc_calibrate = rtl8188f_phy_lc_calibrate,
+	.phy_iq_calibrate = rtl8188fu_phy_iq_calibrate,
+	.config_channel = rtl8188fu_config_channel,
+	.parse_rx_desc = rtl8xxxu_parse_rxdesc24,
+	.init_aggregation = rtl8188fu_init_aggregation,
+	.init_statistics = rtl8188fu_init_statistics,
+	.enable_rf = rtl8188f_enable_rf,
+	.disable_rf = rtl8188f_disable_rf,
+	.usb_quirks = rtl8188f_usb_quirks,
+	.set_tx_power = rtl8188f_set_tx_power,
+	.update_rate_mask = rtl8xxxu_gen2_update_rate_mask,
+	.report_connect = rtl8xxxu_gen2_report_connect,
+	.fill_txdesc = rtl8xxxu_fill_txdesc_v2,
+	.writeN_block_size = 128,
+	.rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24),
+	.tx_desc_size = sizeof(struct rtl8xxxu_txdesc40),
+	.has_s0s1 = 1,
+	.has_tx_report = 1,
+	.gen2_thermal_meter = 1,
+	.needs_full_init = 1,
+	.adda_1t_init = 0x03c00014,
+	.adda_1t_path_on = 0x03c00014,
+	.trxff_boundary = 0x3f7f,
+	.pbp_rx = PBP_PAGE_SIZE_256,
+	.pbp_tx = PBP_PAGE_SIZE_256,
+	.mactable = rtl8188f_mac_init_table,
+	.total_page_num = TX_TOTAL_PAGE_NUM_8188F,
+	.page_num_hi = TX_PAGE_NUM_HI_PQ_8188F,
+	.page_num_lo = TX_PAGE_NUM_LO_PQ_8188F,
+	.page_num_norm = TX_PAGE_NUM_NORM_PQ_8188F,
+};
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c
index 27c4cb688be4..dd84da51686c 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c
@@ -549,6 +549,7 @@  struct rtl8xxxu_fileops rtl8192cu_fops = {
 	.llt_init = rtl8xxxu_init_llt_table,
 	.init_phy_bb = rtl8xxxu_gen1_init_phy_bb,
 	.init_phy_rf = rtl8192cu_init_phy_rf,
+	.phy_lc_calibrate = rtl8723a_phy_lc_calibrate,
 	.phy_iq_calibrate = rtl8xxxu_gen1_phy_iq_calibrate,
 	.config_channel = rtl8xxxu_gen1_config_channel,
 	.parse_rx_desc = rtl8xxxu_parse_rxdesc16,
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
index b06508d0cdf8..c37bae079cf6 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
@@ -1680,6 +1680,7 @@  struct rtl8xxxu_fileops rtl8192eu_fops = {
 	.llt_init = rtl8xxxu_auto_llt_table,
 	.init_phy_bb = rtl8192eu_init_phy_bb,
 	.init_phy_rf = rtl8192eu_init_phy_rf,
+	.phy_lc_calibrate = rtl8723a_phy_lc_calibrate,
 	.phy_iq_calibrate = rtl8192eu_phy_iq_calibrate,
 	.config_channel = rtl8xxxu_gen2_config_channel,
 	.parse_rx_desc = rtl8xxxu_parse_rxdesc24,
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c
index 4f93f88716a9..e18ddd441728 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c
@@ -366,6 +366,7 @@  struct rtl8xxxu_fileops rtl8723au_fops = {
 	.llt_init = rtl8xxxu_init_llt_table,
 	.init_phy_bb = rtl8xxxu_gen1_init_phy_bb,
 	.init_phy_rf = rtl8723au_init_phy_rf,
+	.phy_lc_calibrate = rtl8723a_phy_lc_calibrate,
 	.phy_iq_calibrate = rtl8xxxu_gen1_phy_iq_calibrate,
 	.config_channel = rtl8xxxu_gen1_config_channel,
 	.parse_rx_desc = rtl8xxxu_parse_rxdesc16,
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
index a71e1816e632..7c9b8432a4e9 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
@@ -518,7 +518,7 @@  static int rtl8723bu_init_phy_rf(struct rtl8xxxu_priv *priv)
 	return ret;
 }
 
-static void rtl8723bu_phy_init_antenna_selection(struct rtl8xxxu_priv *priv)
+void rtl8723bu_phy_init_antenna_selection(struct rtl8xxxu_priv *priv)
 {
 	u32 val32;
 
@@ -1650,6 +1650,7 @@  struct rtl8xxxu_fileops rtl8723bu_fops = {
 	.init_phy_bb = rtl8723bu_init_phy_bb,
 	.init_phy_rf = rtl8723bu_init_phy_rf,
 	.phy_init_antenna_selection = rtl8723bu_phy_init_antenna_selection,
+	.phy_lc_calibrate = rtl8723a_phy_lc_calibrate,
 	.phy_iq_calibrate = rtl8723bu_phy_iq_calibrate,
 	.config_channel = rtl8xxxu_gen2_config_channel,
 	.parse_rx_desc = rtl8xxxu_parse_rxdesc24,
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index c66f0726b253..5ec370272c61 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -52,6 +52,7 @@  MODULE_FIRMWARE("rtlwifi/rtl8192cufw_TMSC.bin");
 MODULE_FIRMWARE("rtlwifi/rtl8192eu_nic.bin");
 MODULE_FIRMWARE("rtlwifi/rtl8723bu_nic.bin");
 MODULE_FIRMWARE("rtlwifi/rtl8723bu_bt.bin");
+MODULE_FIRMWARE("rtlwifi/rtl8188fufw.bin");
 
 module_param_named(debug, rtl8xxxu_debug, int, 0600);
 MODULE_PARM_DESC(debug, "Set debug mask");
@@ -1606,6 +1607,7 @@  static void rtl8xxxu_print_chipinfo(struct rtl8xxxu_priv *priv)
 
 static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv)
 {
+	const struct usb_device_descriptor *descriptor = &priv->udev->descriptor;
 	struct device *dev = &priv->udev->dev;
 	struct ieee80211_hw *hw = priv->hw;
 	u32 val32, bonding;
@@ -1619,6 +1621,17 @@  static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv)
 		return -ENOTSUPP;
 	}
 
+	if (descriptor->idVendor == USB_VENDOR_ID_REALTEK &&
+	    descriptor->idProduct == 0xf179) {
+		sprintf(priv->chip_name, "8188FU");
+		priv->rtl_chip = RTL8188F;
+		priv->rf_paths = 1;
+		priv->rx_paths = 1;
+		priv->tx_paths = 1;
+		priv->has_wifi = 1;
+		goto skip_complicated_chip_detection;
+	}
+
 	if (val32 & SYS_CFG_BT_FUNC) {
 		if (priv->chip_cut >= 3) {
 			sprintf(priv->chip_name, "8723BU");
@@ -1685,11 +1698,14 @@  static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv)
 		priv->has_wifi = 1;
 	}
 
+skip_complicated_chip_detection:
+
 	hw->wiphy->available_antennas_tx = BIT(priv->tx_paths) - 1;
 	hw->wiphy->available_antennas_rx = BIT(priv->rx_paths) - 1;
 
 	switch (priv->rtl_chip) {
 	case RTL8188E:
+	case RTL8188F:
 	case RTL8192E:
 	case RTL8723B:
 		switch (val32 & SYS_CFG_VENDOR_EXT_MASK) {
@@ -1720,7 +1736,18 @@  static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv)
 	val32 = rtl8xxxu_read32(priv, REG_GPIO_OUTSTS);
 	priv->rom_rev = (val32 & GPIO_RF_RL_ID) >> 28;
 
-	val16 = rtl8xxxu_read16(priv, REG_NORMAL_SIE_EP_TX);
+	/*
+	 * 8188FU vendor driver doesn't use REG_NORMAL_SIE_EP_TX,
+	 * it just decides the queue mapping based on nr_out_eps.
+	 * However, reading the register returns "0x321" which
+	 * results in a wrong ep_tx_count of 3 and most frames
+	 * not being transmitted.
+	 */
+	if (priv->rtl_chip == RTL8188F)
+		val16 = 0;
+	else
+		val16 = rtl8xxxu_read16(priv, REG_NORMAL_SIE_EP_TX);
+
 	if (val16 & NORMAL_SIE_EP_TX_HIGH_MASK) {
 		priv->ep_tx_high_queue = 1;
 		priv->ep_tx_count++;
@@ -1763,7 +1790,7 @@  static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv)
 	return 0;
 }
 
-static int
+int
 rtl8xxxu_read_efuse8(struct rtl8xxxu_priv *priv, u16 offset, u8 *data)
 {
 	int i;
@@ -1979,7 +2006,7 @@  static int rtl8xxxu_start_firmware(struct rtl8xxxu_priv *priv)
 	/*
 	 * Init H2C command
 	 */
-	if (priv->rtl_chip == RTL8723B)
+	if (priv->rtl_chip == RTL8723B || priv->rtl_chip == RTL8188F)
 		rtl8xxxu_write8(priv, REG_HMTFR, 0x0f);
 exit:
 	return ret;
@@ -2099,6 +2126,7 @@  int rtl8xxxu_load_firmware(struct rtl8xxxu_priv *priv, char *fw_name)
 	case 0x88c0:
 	case 0x5300:
 	case 0x2300:
+	case 0x88f0:
 		break;
 	default:
 		ret = -EINVAL;
@@ -2166,7 +2194,9 @@  rtl8xxxu_init_mac(struct rtl8xxxu_priv *priv)
 		}
 	}
 
-	if (priv->rtl_chip != RTL8723B && priv->rtl_chip != RTL8192E)
+	if (priv->rtl_chip != RTL8723B &&
+	    priv->rtl_chip != RTL8192E &&
+	    priv->rtl_chip != RTL8188F)
 		rtl8xxxu_write8(priv, REG_MAX_AGGR_NUM, 0x0a);
 
 	return 0;
@@ -3427,7 +3457,7 @@  void rtl8xxxu_gen1_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
 			   priv->bb_recovery_backup, RTL8XXXU_BB_REGS);
 }
 
-static void rtl8723a_phy_lc_calibrate(struct rtl8xxxu_priv *priv)
+void rtl8723a_phy_lc_calibrate(struct rtl8xxxu_priv *priv)
 {
 	u32 val32;
 	u32 rf_amode, rf_bmode = 0, lstf;
@@ -4031,6 +4061,9 @@  static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
 	if (priv->rtl_chip == RTL8192E) {
 		rtl8xxxu_write32(priv, REG_HIMR0, 0x00);
 		rtl8xxxu_write32(priv, REG_HIMR1, 0x00);
+	} else if (priv->rtl_chip == RTL8188F) {
+		rtl8xxxu_write32(priv, REG_HISR0, 0xffffffff);
+		rtl8xxxu_write32(priv, REG_HISR1, 0xffffffff);
 	} else {
 		/*
 		 * Enable all interrupts - not obvious USB needs to do this
@@ -4050,11 +4083,25 @@  static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
 		RCR_APPEND_PHYSTAT | RCR_APPEND_ICV | RCR_APPEND_MIC;
 	rtl8xxxu_write32(priv, REG_RCR, val32);
 
-	/*
-	 * Accept all multicast
-	 */
-	rtl8xxxu_write32(priv, REG_MAR, 0xffffffff);
-	rtl8xxxu_write32(priv, REG_MAR + 4, 0xffffffff);
+	if (priv->rtl_chip == RTL8188F) {
+		/* Accept all data frames */
+		rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0xffff);
+
+		/*
+		 * Since ADF is removed from RCR, ps-poll will not be indicate to driver,
+		 * RxFilterMap should mask ps-poll to gurantee AP mode can rx ps-poll.
+		 */
+		rtl8xxxu_write16(priv, REG_RXFLTMAP1, 0x400);
+
+		/* Accept all management frames */
+		rtl8xxxu_write16(priv, REG_RXFLTMAP0, 0xffff);
+	} else {
+		/*
+		 * Accept all multicast
+		 */
+		rtl8xxxu_write32(priv, REG_MAR, 0xffffffff);
+		rtl8xxxu_write32(priv, REG_MAR + 4, 0xffffffff);
+	}
 
 	/*
 	 * Init adaptive controls
@@ -4105,14 +4152,17 @@  static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
 	val16 = BEACON_DISABLE_TSF_UPDATE | (BEACON_DISABLE_TSF_UPDATE << 8);
 	rtl8xxxu_write16(priv, REG_BEACON_CTRL, val16);
 	rtl8xxxu_write16(priv, REG_TBTT_PROHIBIT, 0x6404);
-	rtl8xxxu_write8(priv, REG_DRIVER_EARLY_INT, DRIVER_EARLY_INT_TIME);
+	if (priv->rtl_chip != RTL8188F)
+		/* Firmware will control REG_DRVERLYINT when power saving is enable, */
+		/* so don't set this register on STA mode. */
+		rtl8xxxu_write8(priv, REG_DRIVER_EARLY_INT, DRIVER_EARLY_INT_TIME);
 	rtl8xxxu_write8(priv, REG_BEACON_DMA_TIME, BEACON_DMA_ATIME_INT_TIME);
 	rtl8xxxu_write16(priv, REG_BEACON_TCFG, 0x660F);
 
 	/*
 	 * Initialize burst parameters
 	 */
-	if (priv->rtl_chip == RTL8723B) {
+	if (priv->rtl_chip == RTL8723B || priv->rtl_chip == RTL8188F) {
 		/*
 		 * For USB high speed set 512B packets
 		 */
@@ -4130,13 +4180,26 @@  static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
 		rtl8xxxu_write8(priv, REG_HT_SINGLE_AMPDU_8723B, val8);
 
 		rtl8xxxu_write16(priv, REG_MAX_AGGR_NUM, 0x0c14);
-		rtl8xxxu_write8(priv, REG_AMPDU_MAX_TIME_8723B, 0x5e);
+		if (priv->rtl_chip == RTL8723B)
+			val8 = 0x5e;
+		else if (priv->rtl_chip == RTL8188F)
+			val8 = 0x70; /* 0x5e would make it very slow */
+		rtl8xxxu_write8(priv, REG_AMPDU_MAX_TIME_8723B, val8);
 		rtl8xxxu_write32(priv, REG_AGGLEN_LMT, 0xffffffff);
 		rtl8xxxu_write8(priv, REG_RX_PKT_LIMIT, 0x18);
 		rtl8xxxu_write8(priv, REG_PIFS, 0x00);
-		rtl8xxxu_write8(priv, REG_USTIME_TSF_8723B, 0x50);
-		rtl8xxxu_write8(priv, REG_USTIME_EDCA, 0x50);
-
+		if (priv->rtl_chip == RTL8188F) {
+			rtl8xxxu_write8(priv, REG_FWHW_TXQ_CTRL, FWHW_TXQ_CTRL_AMPDU_RETRY);
+			rtl8xxxu_write32(priv, REG_FAST_EDCA_CTRL, 0x03086666);
+		}
+		if (priv->rtl_chip == RTL8723B)
+			val8 = 0x50;
+		else if (priv->rtl_chip == RTL8188F)
+			val8 = 0x28; /* 0x50 would make the upload slow */
+		rtl8xxxu_write8(priv, REG_USTIME_TSF_8723B, val8);
+		rtl8xxxu_write8(priv, REG_USTIME_EDCA, val8);
+
+		/* to prevent mac is reseted by bus. */
 		val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL);
 		val8 |= BIT(5) | BIT(6);
 		rtl8xxxu_write8(priv, REG_RSV_CTRL, val8);
@@ -4145,6 +4208,11 @@  static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
 	if (fops->init_aggregation)
 		fops->init_aggregation(priv);
 
+	if (priv->rtl_chip == RTL8188F) {
+		rtl8xxxu_write16(priv, REG_PKT_VO_VI_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */
+		rtl8xxxu_write16(priv, REG_PKT_BE_BK_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */
+	}
+
 	/*
 	 * Enable CCK and OFDM block
 	 */
@@ -4163,7 +4231,7 @@  static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
 	fops->set_tx_power(priv, 1, false);
 
 	/* Let the 8051 take control of antenna setting */
-	if (priv->rtl_chip != RTL8192E) {
+	if (priv->rtl_chip != RTL8192E && priv->rtl_chip != RTL8188F) {
 		val8 = rtl8xxxu_read8(priv, REG_LEDCFG2);
 		val8 |= LEDCFG2_DPDT_SELECT;
 		rtl8xxxu_write8(priv, REG_LEDCFG2, val8);
@@ -4174,7 +4242,8 @@  static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
 	/* Disable BAR - not sure if this has any effect on USB */
 	rtl8xxxu_write32(priv, REG_BAR_MODE_CTRL, 0x0201ffff);
 
-	rtl8xxxu_write16(priv, REG_FAST_EDCA_CTRL, 0);
+	if (priv->rtl_chip != RTL8188F)
+		rtl8xxxu_write16(priv, REG_FAST_EDCA_CTRL, 0);
 
 	if (fops->init_statistics)
 		fops->init_statistics(priv);
@@ -4191,20 +4260,38 @@  static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
 		 * Reset USB mode switch setting
 		 */
 		rtl8xxxu_write8(priv, REG_ACLK_MON, 0x00);
+	} else if (priv->rtl_chip == RTL8188F) {
+		/*
+		 * Init GPIO settings for 8188f
+		 */
+		val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG);
+		val8 &= ~GPIO_MUXCFG_IO_SEL_ENBT;
+		rtl8xxxu_write8(priv, REG_GPIO_MUXCFG, val8);
 	}
 
-	rtl8723a_phy_lc_calibrate(priv);
+	if (priv->rtl_chip == RTL8188F)
+		/* CCK PD */
+		rtl8xxxu_write8(priv, REG_CCK_PD_THRESH, CCK_PD_TYPE1_LV1_TH);
+
+	fops->phy_lc_calibrate(priv);
 
 	fops->phy_iq_calibrate(priv);
 
 	/*
 	 * This should enable thermal meter
 	 */
-	if (fops->gen2_thermal_meter)
-		rtl8xxxu_write_rfreg(priv,
-				     RF_A, RF6052_REG_T_METER_8723B, 0x37cf8);
-	else
+	if (fops->gen2_thermal_meter) {
+		if (priv->rtl_chip == RTL8188F) {
+			val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_T_METER_8723B);
+			val32 |= 0x30000;
+			rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_T_METER_8723B, val32);
+		} else {
+			rtl8xxxu_write_rfreg(priv,
+					     RF_A, RF6052_REG_T_METER_8723B, 0x37cf8);
+		}
+	} else {
 		rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_T_METER, 0x60);
+	}
 
 	/* Set NAV_UPPER to 30000us */
 	val8 = ((30000 + NAV_UPPER_UNIT - 1) / NAV_UPPER_UNIT);
@@ -6617,6 +6704,7 @@  static int rtl8xxxu_probe(struct usb_interface *interface,
 		case 0x8178:
 		case 0x817f:
 		case 0x818b:
+		case 0xf179:
 			untested = 0;
 			break;
 		}
@@ -6832,6 +6920,9 @@  static const struct usb_device_id dev_table[] = {
 	.driver_info = (unsigned long)&rtl8723bu_fops},
 {USB_DEVICE_AND_INTERFACE_INFO(0x7392, 0xa611, 0xff, 0xff, 0xff),
 	.driver_info = (unsigned long)&rtl8723bu_fops},
+/* RTL8188FU */
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0xf179, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8188fu_fops},
 #ifdef CONFIG_RTL8XXXU_UNTESTED
 /* Still supported by rtlwifi */
 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8176, 0xff, 0xff, 0xff),
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
index 438b65ba9640..35bde1404793 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
@@ -135,6 +135,7 @@ 
 #define REG_CAL_TIMER			0x003c
 #define REG_ACLK_MON			0x003e
 #define REG_GPIO_MUXCFG			0x0040
+#define  GPIO_MUXCFG_IO_SEL_ENBT	BIT(5)
 #define REG_GPIO_IO_SEL			0x0042
 #define REG_MAC_PINMUX_CFG		0x0043
 #define REG_GPIO_PIN_CTRL		0x0044
@@ -391,6 +392,7 @@ 
 #define REG_CPWM			0x012f
 #define REG_FWIMR			0x0130
 #define REG_FWISR			0x0134
+#define REG_FTIMR			0x0138
 #define REG_PKTBUF_DBG_CTRL		0x0140
 #define REG_PKTBUF_DBG_DATA_L		0x0144
 #define REG_PKTBUF_DBG_DATA_H		0x0148
@@ -440,6 +442,9 @@ 
 
 #define REG_FIFOPAGE			0x0204
 #define REG_TDECTRL			0x0208
+
+#define REG_DWBCN0_CTRL_8188F		REG_TDECTRL
+
 #define REG_TXDMA_OFFSET_CHK		0x020c
 #define  TXDMA_OFFSET_DROP_DATA_EN	BIT(9)
 #define REG_TXDMA_STATUS		0x0210
@@ -925,6 +930,7 @@ 
 
 #define REG_FPGA0_XA_LSSI_READBACK	0x08a0	/* Tranceiver LSSI Readback */
 #define REG_FPGA0_XB_LSSI_READBACK	0x08a4
+#define REG_FPGA0_PSD_REPORT		0x08b4
 #define REG_HSPI_XA_READBACK		0x08b8	/* Transceiver A HSPI read */
 #define REG_HSPI_XB_READBACK		0x08bc	/* Transceiver B HSPI read */
 
@@ -936,6 +942,7 @@ 
 #define REG_RFE_PATH_SELECT		0x0940	/* 8723BU */
 #define REG_RFE_BUFFER			0x0944	/* 8723BU */
 #define REG_S0S1_PATH_SWITCH		0x0948	/* 8723BU */
+#define REG_OFDM_RX_DFIR		0x954
 
 #define REG_CCK0_SYSTEM			0x0a00
 #define  CCK0_SIDEBAND			BIT(4)
@@ -946,6 +953,13 @@ 
 #define  CCK0_AFE_RX_ANT_A		0
 #define  CCK0_AFE_RX_ANT_B		(BIT(24) | BIT(26))
 
+#define REG_CCK_PD_THRESH			0x0a0a
+#define  CCK_PD_TYPE1_LV0_TH		0x40
+#define  CCK_PD_TYPE1_LV1_TH		0x83
+#define  CCK_PD_TYPE1_LV2_TH		0xcd
+#define  CCK_PD_TYPE1_LV3_TH		0xdd
+#define  CCK_PD_TYPE1_LV4_TH		0xed
+
 #define REG_CONFIG_ANT_A		0x0b68
 #define REG_CONFIG_ANT_B		0x0b6c
 
@@ -965,6 +979,7 @@ 
 
 #define REG_OFDM0_FA_RSTC		0x0c0c
 
+#define REG_OFDM0_XA_RX_AFE		0x0c10
 #define REG_OFDM0_XA_RX_IQ_IMBALANCE	0x0c14
 #define REG_OFDM0_XB_RX_IQ_IMBALANCE	0x0c1c
 
@@ -1011,6 +1026,9 @@ 
 #define  OFDM_LSTF_MASK			0x70000000
 
 #define REG_OFDM1_TRX_PATH_ENABLE	0x0d04
+#define REG_OFDM1_CFO_TRACKING		0x0d2c
+#define REG_OFDM1_CSI_FIX_MASK1		0x0d40
+#define REG_OFDM1_CSI_FIX_MASK2		0x0d44
 
 #define REG_TX_AGC_A_RATE18_06		0x0e00
 #define REG_TX_AGC_A_RATE54_24		0x0e04
@@ -1202,6 +1220,7 @@ 
 #define RF6052_REG_UNKNOWN_43		0x43
 #define RF6052_REG_UNKNOWN_55		0x55
 #define RF6052_REG_UNKNOWN_56		0x56
+#define RF6052_REG_RXG_MIX_SWBW		0x87
 #define RF6052_REG_S0S1			0xb0
 #define RF6052_REG_UNKNOWN_DF		0xdf
 #define RF6052_REG_UNKNOWN_ED		0xed