| Message ID | 20220905070240.1634997-1-bhupesh.sharma@linaro.org |
|---|---|
| State | Accepted |
| Commit | 7dac7991408f77b0b33ee5e6b729baa683889277 |
| Headers | show |
| Series | [v2] arm64: dts: qcom: sc8280xp-pmics: Remove reg entry & use correct node name for pmc8280c_lpg node | expand |
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi index ae90b97aecb8..24836b6b9bbc 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi @@ -60,9 +60,8 @@ pmc8280c_gpios: gpio@8800 { #interrupt-cells = <2>; }; - pmc8280c_lpg: lpg@e800 { + pmc8280c_lpg: pwm { compatible = "qcom,pm8350c-pwm"; - reg = <0xe800>; #address-cells = <1>; #size-cells = <0>;
Commit eeca7d46217c ("arm64: dts: qcom: pm8350c: Drop PWM reg declaration") dropped PWM reg declaration for pm8350c pwm(s), but there is a leftover 'reg' entry inside the lpg/pwm node in sc8280xp dts file. Remove the same. While at it, also remove the unused unit address in the node label. Also, since dt-bindings expect LPG/PWM node name to be "pwm", use correct node name as well, to fix the following error reported by 'make dtbs_check': 'lpg' does not match any of the regexes Fixes: eeca7d46217c ("arm64: dts: qcom: pm8350c: Drop PWM reg declaration") Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> --- - v1 can be viewed here: https://lore.kernel.org/linux-arm-msm/20220903084440.1509562-1-bhupesh.sharma@linaro.org/ - Fixed the review comments shared by Krzysztof. arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)