@@ -106,6 +106,31 @@
clock-frequency = <0>;
};
+ flash@30000000 {
+ compatible = "arm,versatile-flash", "cfi-flash";
+ reg = <0x30000000 0x4000000>;
+ bank-width = <4>;
+ };
+
+ fpga_flash@38000000 {
+ compatible = "arm,versatile-flash", "cfi-flash";
+ reg = <0x38000000 0x800000>;
+ bank-width = <4>;
+ };
+
+ /*
+ * The "secure flash" contains things like the boot
+ * monitor so we don't want people to accidentally
+ * screw this up. Mark the device tree node disabled
+ * by default.
+ */
+ secflash@3c000000 {
+ compatible = "arm,versatile-flash", "cfi-flash";
+ reg = <0x3c000000 0x4000000>;
+ bank-width = <4>;
+ status = "disabled";
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -297,6 +322,13 @@
clocks = <&uartclk>, <&pclk>;
clock-names = "uartclk", "apb_pclk";
};
+
+ /* Direct-mapped development chip ROM */
+ pb1176_rom@10200000 {
+ compatible = "direct-mapped";
+ reg = <0x10200000 0x4000>;
+ bank-width = <1>;
+ };
};
/* These peripherals are inside the FPGA rather than the DevChip */
This adds the flash memories and ROM to the PB1175 DTS file. The secure flash is marked as "disabled" by default so as to protect the user from overwriting the boot monitor. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- arch/arm/boot/dts/arm-realview-pb1176.dts | 32 +++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) -- 2.4.3 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/