| Message ID | 20220909133954.97010-3-paul.kocialkowski@bootlin.com |
|---|---|
| State | Accepted |
| Commit | 8985fc724ba89d9b00694304b3f9faf69f4073d0 |
| Headers | show |
| Series | media: sunxi: MIPI CSI-2 controllers link fixups | expand |
diff --git a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c index b032ec13a683..5e1c25db7bc4 100644 --- a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c +++ b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c @@ -557,8 +557,10 @@ sun8i_a83t_mipi_csi2_bridge_setup(struct sun8i_a83t_mipi_csi2_device *csi2_dev) /* Media Pads */ - pads[SUN8I_A83T_MIPI_CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK; - pads[SUN8I_A83T_MIPI_CSI2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; + pads[SUN8I_A83T_MIPI_CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK | + MEDIA_PAD_FL_MUST_CONNECT; + pads[SUN8I_A83T_MIPI_CSI2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE | + MEDIA_PAD_FL_MUST_CONNECT; ret = media_entity_pads_init(&subdev->entity, SUN8I_A83T_MIPI_CSI2_PAD_COUNT, pads);
The bridge needs both its pads connected to be able to stream data. Enforcing this is useful to produce an error when no sensor is connected. Fixes: 576d196c522b ("media: sunxi: Add support for the A83T MIPI CSI-2 controller") Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> --- .../sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)