diff mbox series

[v1,1/5] dt-bindings: media: add bindings for dcmipp driver

Message ID 20220910144010.34272-2-hugues.fruchet@foss.st.com
State New
Headers show
Series Add support for DCMIPP camera interface of STMicroelectronics STM32 SoC series | expand

Commit Message

Hugues Fruchet Sept. 10, 2022, 2:40 p.m. UTC 
From: Alain Volmat <alain.volmat@foss.st.com>

Add the yaml binding for the DCMIPP driver.

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
---
 .../bindings/media/st,stm32-dcmipp.yaml       | 96 +++++++++++++++++++
 1 file changed, 96 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml

Comments

Rob Herring Sept. 12, 2022, 12:44 a.m. UTC | #1 
On Sat, 10 Sep 2022 16:40:06 +0200, Hugues Fruchet wrote:
> From: Alain Volmat <alain.volmat@foss.st.com>
> 
> Add the yaml binding for the DCMIPP driver.
> 
> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
> ---
>  .../bindings/media/st,stm32-dcmipp.yaml       | 96 +++++++++++++++++++
>  1 file changed, 96 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/st,stm32-dcmipp.example.dtb: dcmipp@5a000000: port:endpoint: Unevaluated properties are not allowed ('pclk-max-frequency' was unexpected)
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml
new file mode 100644
index 000000000000..70631046017d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml
@@ -0,0 +1,96 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/st,stm32-dcmipp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DCMIPP Digital Camera Memory Interface Pixel Processor binding
+
+maintainers:
+  - Hugues Fruchet <hugues.fruchet@foss.st.com>
+  - Alain Volmat <alain.volmat@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stm32mp13-dcmipp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: kclk
+
+  resets:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      DCMIPP supports a single port node with parallel bus.
+
+    properties:
+      endpoint:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-type:
+            enum: [5, 6]
+            default: 5
+
+          bus-width:
+            enum: [8, 10, 12, 14]
+            default: 8
+
+          pclk-sample: true
+          hsync-active: true
+          vsync-active: true
+
+        required:
+          - pclk-sample
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp13-clks.h>
+    #include <dt-bindings/reset/stm32mp13-resets.h>
+    dcmipp: dcmipp@5a000000 {
+        compatible = "st,stm32mp13-dcmipp";
+        reg = <0x5a000000 0x400>;
+        interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+        resets = <&rcc DCMIPP_R>;
+        clocks = <&rcc DCMIPP_K>;
+        clock-names = "kclk";
+
+        port {
+             dcmipp_0: endpoint {
+                   remote-endpoint = <&mipid02_2>;
+                   bus-width = <8>;
+                   hsync-active = <0>;
+                   vsync-active = <0>;
+                   pclk-sample = <0>;
+                   pclk-max-frequency = <120000000>;
+             };
+        };
+    };
+
+...