diff mbox series

[v2,17/40] dt-bindings: pinctrl: qcom,sm8350-pinctrl: fix indentation in example

Message ID 20220912061746.6311-18-krzysztof.kozlowski@linaro.org
State Superseded
Headers show
Series pinctrl/arm64: qcom: fix some of Qualcomm pinctrl schema warnings | expand

Commit Message

Krzysztof Kozlowski Sept. 12, 2022, 6:17 a.m. UTC
Bindings example should be indented with 4-spaces.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/pinctrl/qcom,sm8350-pinctrl.yaml | 58 +++++++++----------
 1 file changed, 29 insertions(+), 29 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml
index 211cca11f94f..f3106d25adcf 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml
@@ -114,34 +114,34 @@  $defs:
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        pinctrl@f100000 {
-                compatible = "qcom,sm8350-tlmm";
-                reg = <0x0f100000 0x300000>;
-                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-                gpio-ranges = <&tlmm 0 0 203>;
-
-                gpio-wo-subnode-state {
-                        pins = "gpio1";
-                        function = "gpio";
-                };
-
-                uart-w-subnodes-state {
-                        rx-pins {
-                                pins = "gpio18";
-                                function = "qup3";
-                                bias-pull-up;
-                        };
-
-                        tx-pins {
-                                pins = "gpio19";
-                                function = "qup3";
-                                bias-disable;
-                        };
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@f100000 {
+        compatible = "qcom,sm8350-tlmm";
+        reg = <0x0f100000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 203>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
         };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio18";
+                function = "qup3";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio19";
+                function = "qup3";
+                bias-disable;
+            };
+        };
+    };
 ...