diff mbox series

[v5,4/5] gpio: pca953x: Swap if statements to save later complexity

Message ID 20220914151558.536226-4-martyn.welch@collabora.co.uk
State New
Headers show
Series None | expand

Commit Message

Martyn Welch Sept. 14, 2022, 3:15 p.m. UTC 
From: Martyn Welch <martyn.welch@collabora.com>

A later patch in the series adds support for a further chip type that
shares some similarity with the PCA953X_TYPE. In order to keep the logic
simple, swap over the if and else portions where checks are made against
PCA953X_TYPE and instead check for PCA957X_TYPE.

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---

Changes in v2:
 - None

Changes in v3:
 - None

Changes in v4:
 - None

Changes in v5:
 - None

 drivers/gpio/gpio-pca953x.c | 31 +++++++++++++++----------------
 1 file changed, 15 insertions(+), 16 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index a6081d93d4fa..c27b83bbbfe1 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -294,13 +294,13 @@  static bool pca953x_readable_register(struct device *dev, unsigned int reg)
 	struct pca953x_chip *chip = dev_get_drvdata(dev);
 	u32 bank;
 
-	if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) {
-		bank = PCA953x_BANK_INPUT | PCA953x_BANK_OUTPUT |
-		       PCA953x_BANK_POLARITY | PCA953x_BANK_CONFIG;
-	} else {
+	if (PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE) {
 		bank = PCA957x_BANK_INPUT | PCA957x_BANK_OUTPUT |
 		       PCA957x_BANK_POLARITY | PCA957x_BANK_CONFIG |
 		       PCA957x_BANK_BUSHOLD;
+	} else {
+		bank = PCA953x_BANK_INPUT | PCA953x_BANK_OUTPUT |
+		       PCA953x_BANK_POLARITY | PCA953x_BANK_CONFIG;
 	}
 
 	if (chip->driver_data & PCA_PCAL) {
@@ -317,12 +317,12 @@  static bool pca953x_writeable_register(struct device *dev, unsigned int reg)
 	struct pca953x_chip *chip = dev_get_drvdata(dev);
 	u32 bank;
 
-	if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) {
-		bank = PCA953x_BANK_OUTPUT | PCA953x_BANK_POLARITY |
-			PCA953x_BANK_CONFIG;
-	} else {
+	if (PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE) {
 		bank = PCA957x_BANK_OUTPUT | PCA957x_BANK_POLARITY |
 			PCA957x_BANK_CONFIG | PCA957x_BANK_BUSHOLD;
+	} else {
+		bank = PCA953x_BANK_OUTPUT | PCA953x_BANK_POLARITY |
+			PCA953x_BANK_CONFIG;
 	}
 
 	if (chip->driver_data & PCA_PCAL)
@@ -337,10 +337,10 @@  static bool pca953x_volatile_register(struct device *dev, unsigned int reg)
 	struct pca953x_chip *chip = dev_get_drvdata(dev);
 	u32 bank;
 
-	if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE)
-		bank = PCA953x_BANK_INPUT;
-	else
+	if (PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE)
 		bank = PCA957x_BANK_INPUT;
+	else
+		bank = PCA953x_BANK_INPUT;
 
 	if (chip->driver_data & PCA_PCAL)
 		bank |= PCAL9xxx_BANK_IRQ_STAT;
@@ -1071,13 +1071,12 @@  static int pca953x_probe(struct i2c_client *client,
 	/* initialize cached registers from their original values.
 	 * we can't share this chip with another i2c master.
 	 */
-
-	if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) {
-		chip->regs = &pca953x_regs;
-		ret = device_pca95xx_init(chip, invert);
-	} else {
+	if (PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE) {
 		chip->regs = &pca957x_regs;
 		ret = device_pca957x_init(chip, invert);
+	} else {
+		chip->regs = &pca953x_regs;
+		ret = device_pca95xx_init(chip, invert);
 	}
 	if (ret)
 		goto err_exit;