@@ -161,6 +161,12 @@ config CMD_CPU
internal name) and clock frequency. Other information may be
available depending on the CPU driver.
+config CMD_FWU_METADATA
+ bool "fwu metadata read"
+ depends on FWU_MULTI_BANK_UPDATE
+ help
+ Command to read the metadata and dump it's contents
+
config CMD_LICENSE
bool "license"
select BUILD_BIN2C
@@ -76,6 +76,7 @@ obj-$(CONFIG_CMD_FPGA) += fpga.o
obj-$(CONFIG_CMD_FPGAD) += fpgad.o
obj-$(CONFIG_CMD_FS_GENERIC) += fs.o
obj-$(CONFIG_CMD_FUSE) += fuse.o
+obj-$(CONFIG_CMD_FWU_METADATA) += fwu_mdata.o
obj-$(CONFIG_CMD_GETTIME) += gettime.o
obj-$(CONFIG_CMD_GPIO) += gpio.o
obj-$(CONFIG_CMD_HVC) += smccc.o
new file mode 100644
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <command.h>
+#include <dm.h>
+#include <fwu.h>
+#include <fwu_mdata.h>
+#include <log.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+#include <linux/types.h>
+
+static void print_mdata(struct fwu_mdata *mdata)
+{
+ int i, j;
+ struct fwu_image_entry *img_entry;
+ struct fwu_image_bank_info *img_info;
+
+ printf("\tFWU Metadata\n");
+ printf("crc32: %#x\n", mdata->crc32);
+ printf("version: %#x\n", mdata->version);
+ printf("active_index: %#x\n", mdata->active_index);
+ printf("previous_active_index: %#x\n", mdata->previous_active_index);
+
+ printf("\tImage Info\n");
+ for (i = 0; i < CONFIG_FWU_NUM_IMAGES_PER_BANK; i++) {
+ img_entry = &mdata->img_entry[i];
+ printf("\nImage Type Guid: %pUL\n",
+ &img_entry->image_type_uuid);
+ printf("Location Guid: %pUL\n", &img_entry->location_uuid);
+ for (j = 0; j < CONFIG_FWU_NUM_BANKS; j++) {
+ img_info = &img_entry->img_bank_info[j];
+ printf("Image Guid: %pUL\n", &img_info->image_uuid);
+ printf("Image Acceptance: %s\n",
+ img_info->accepted == 0x1 ? "yes" : "no");
+ }
+ }
+}
+
+int do_fwu_mdata_read(struct cmd_tbl *cmdtp, int flag,
+ int argc, char * const argv[])
+{
+ struct udevice *dev;
+ int ret = CMD_RET_SUCCESS, res;
+ struct fwu_mdata mdata = { 0 };
+
+ if (uclass_get_device(UCLASS_FWU_MDATA, 0, &dev) || !dev) {
+ log_err("Unable to get FWU metadata device\n");
+ return CMD_RET_FAILURE;
+ }
+
+ res = fwu_mdata_check(dev);
+ if (res < 0) {
+ log_err("FWU Metadata check failed\n");
+ ret = CMD_RET_FAILURE;
+ goto out;
+ }
+
+ res = fwu_get_mdata(dev, &mdata);
+ if (res < 0) {
+ log_err("Unable to get valid FWU metadata\n");
+ ret = CMD_RET_FAILURE;
+ goto out;
+ }
+
+ print_mdata(&mdata);
+
+out:
+ return ret;
+}
+
+U_BOOT_CMD(
+ fwu_mdata_read, 1, 1, do_fwu_mdata_read,
+ "Read and print FWU metadata",
+ ""
+);
new file mode 100644
@@ -0,0 +1,43 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+fwu_mdata_read command
+======================
+
+Synopsis
+--------
+
+::
+
+ fwu_mdata_read
+
+Description
+-----------
+
+The fwu_mdata_read command is used to read the FWU metadata
+structure. The command prints out information about the current active
+bank, the previous active bank, image GUIDs, image acceptance etc.
+
+The output may look like:
+
+::
+
+ => fwu_mdata_read
+ FWU Metadata
+ crc32: 0xec4fb997
+ version: 0x1
+ active_index: 0x0
+ previous_active_index: 0x1
+ Image Info
+
+ Image Type Guid: 19D5DF83-11B0-457B-BE2C-7559C13142A5
+ Location Guid: 49272BEB-8DD8-46DF-8D75-356C65EFF417
+ Image Guid: D57428CC-BB9A-42E0-AA36-3F5A132059C7
+ Image Acceptance: yes
+ Image Guid: 2BE37D6D-8281-4938-BD7B-9A5BBF80869F
+ Image Acceptance: yes
+
+Configuration
+-------------
+
+To use the fwu_mdata_read command, CONFIG_CMD_FWU_METADATA needs to be
+enabled.
@@ -45,6 +45,7 @@ Shell commands
cmd/fatload
cmd/fdt
cmd/for
+ cmd/fwu_mdata
cmd/gpio
cmd/load
cmd/loadm