| Message ID | 20220916121204.3880182-7-vkoul@kernel.org |
|---|---|
| State | New |
| Headers | show |
| Series | [1/6] dt-bindings: firmware: document Qualcomm SC8180x SCM | expand |
On 16/09/2022 13:12, Vinod Koul wrote: > From: Bjorn Andersson <bjorn.andersson@linaro.org> > > Introduce support for the Lenovo Flex 5G laptop, built on the Qualcomm > SC8180X platform. Supported peripherals includes keyboard, touchpad, > UFS storage, external USB and WiFi. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > Signed-off-by: Vinod Koul <vkoul@kernel.org> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../boot/dts/qcom/sc8180x-lenovo-flex-5g.dts | 590 ++++++++++++++++++ > 2 files changed, 591 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index f1c620bb078e..a9de6f50ca37 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -112,6 +112,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1-lte.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sc8180x-lenovo-flex-5g.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc8180x-primus.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb > diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts > new file mode 100644 > index 000000000000..559a1fb6173f > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts > @@ -0,0 +1,590 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. > + * Copyright (c) 2020-2022, Linaro Limited > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/gpio-keys.h> > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > +#include "sc8180x.dtsi" > +#include "sc8180x-pmics.dtsi" > + > +/ { > + model = "Lenovo Flex 5G"; > + compatible = "lenovo,flex-5g", "qcom,sc8180x"; > + > + aliases { > + serial0 = &uart13; > + }; > + > + backlight: backlight { > + compatible = "pwm-backlight"; > + pwms = <&pmc8180c_lpg 4 1000000>; > + enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&bl_pwm_default_state>; > + }; > + > + chosen { > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&hall_int_active_state>; > + > + lid { Does not look like you tested the DTS against bindings. Please run `make dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst for instructions). > + gpios = <&tlmm 121 GPIO_ACTIVE_LOW>; > + linux,input-type = <EV_SW>; > + linux,code = <SW_LID>; > + wakeup-source; > + wakeup-event-action = <EV_ACT_DEASSERTED>; > + }; > + }; > + > + reserved-memory { > + rmtfs_mem: rmtfs-region@85500000 { > + compatible = "qcom,rmtfs-mem"; > + reg = <0x0 0x85500000 0x0 0x200000>; > + no-map; > + > + qcom,client-id = <1>; > + qcom,vmid = <15>; > + }; > + > + wlan_mem: wlan-region@8bc00000 { > + reg = <0x0 0x8bc00000 0x0 0x180000>; > + no-map; > + }; > + > + mpss_mem: mpss-region@8d800000 { > + reg = <0x0 0x8d800000 0x0 0x3000000>; > + no-map; > + }; > + > + adsp_mem: adsp-region@90800000 { > + reg = <0x0 0x90800000 0x0 0x1c00000>; > + no-map; > + }; > + > + gpu_mem: gpu-region@98715000 { > + reg = <0x0 0x98715000 0x0 0x2000>; > + no-map; > + }; > + > + cdsp_mem: cdsp-region@98900000 { > + reg = <0x0 0x98900000 0x0 0x1400000>; > + no-map; > + }; > + }; > + > + vph_pwr: vph-pwr-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vph_pwr"; > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + }; > + > + vreg_s4a_1p8: pm8150-s4 { Use consistent naming, so for example "regulator" suffix in node names. > + compatible = "regulator-fixed"; > + regulator-name = "vreg_s4a_1p8"; > + > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + > + regulator-always-on; > + regulator-boot-on; > + > + vin-supply = <&vph_pwr>; > + }; > +}; > + > +&apps_rsc { > + pmc8180-a-rpmh-regulators { > + compatible = "qcom,pmc8180-rpmh-regulators"; Undocumented compatible. > + qcom,pmic-id = "a"; > + > + vdd-s5-supply = <&vph_pwr>; > + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>; > + > + vreg_s5a_2p0: smps5 { > + regulator-min-microvolt = <2040000>; > + regulator-max-microvolt = <2100000>; > + }; > + > + vreg_l7a_1p8: ldo7 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l9a_1p3: ldo9 { > + regulator-min-microvolt = <1296000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l12a_1p8: ldo12 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + pmc8180c-rpmh-regulators { > + compatible = "qcom,pmc8180c-rpmh-regulators"; Same problem. > + qcom,pmic-id = "c"; > + > + vdd-s6-supply = <&vph_pwr>; > + vdd-l2-l3-supply = <&vreg_s6c_1p35>; > + vdd-bob-supply = <&vph_pwr>; > + > + vreg_s6c_1p35: smps6 { > + regulator-min-microvolt = <1350000>; > + regulator-max-microvolt = <1372000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3c_1p2: ldo3 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l10c_3p3: ldo10 { > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3312000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l11c_3p3: ldo11 { > + regulator-min-microvolt = <3296000>; > + regulator-max-microvolt = <3304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_bob: bob { > + regulator-min-microvolt = <3296000>; > + regulator-max-microvolt = <3350000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + pmc8180-e-rpmh-regulators { > + compatible = "qcom,pmc8180-rpmh-regulators"; > + qcom,pmic-id = "e"; > + > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + vdd-l2-l10-supply = <&vreg_bob>; > + vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>; > + vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>; > + vdd-l13-l16-l17-supply = <&vreg_bob>; > + > + vreg_s4e_0p98: smps4 { > + regulator-min-microvolt = <992000>; > + regulator-max-microvolt = <992000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s5e_2p05: smps5 { > + regulator-min-microvolt = <2040000>; > + regulator-max-microvolt = <2040000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1e_0p75: ldo1 { > + regulator-min-microvolt = <752000>; > + regulator-max-microvolt = <752000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l5e_0p88: ldo5 { > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <880000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7e_1p8: ldo7 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l10e_2p9: ldo10 { > + regulator-min-microvolt = <2904000>; > + regulator-max-microvolt = <2904000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l16e_3p0: ldo16 { > + regulator-min-microvolt = <3072000>; > + regulator-max-microvolt = <3072000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > +}; > + > +&dispcc { > + status = "okay"; > +}; > + > +&gpu { > + status = "okay"; > + > + zap-shader { > + memory-region = <&gpu_mem>; > + firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn"; > + }; > +}; > + > +&i2c1 { > + clock-frequency = <100000>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c1_active>, <&i2c1_hid_active>; > + > + status = "okay"; > + > + hid@10 { > + compatible = "hid-over-i2c"; > + reg = <0x10>; > + hid-descr-addr = <0x1>; > + > + interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>; > + }; > +}; > + > +&i2c7 { > + clock-frequency = <100000>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c7_active>, <&i2c7_hid_active>; > + > + status = "okay"; > + > + hid@5 { > + compatible = "hid-over-i2c"; > + reg = <0x5>; > + hid-descr-addr = <0x20>; > + > + interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>; > + }; > + > + hid@2c { > + compatible = "hid-over-i2c"; > + reg = <0x2c>; > + hid-descr-addr = <0x20>; > + > + interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>; > + }; > +}; > + > +&mdss { > + status = "okay"; > +}; > + > +&mdss_edp { > + data-lanes = <0 1 2 3>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&edp_hpd_active>; > + > + status = "okay"; > + > + aux-bus { > + panel { > + compatible = "edp-panel"; > + no-hpd; > + > + backlight = <&backlight>; > + > + ports { > + port { > + auo_b140han06_in: endpoint { > + remote-endpoint = <&mdss_edp_out>; > + }; > + }; > + }; > + }; > + }; > + > + ports { > + port@1 { > + reg = <1>; > + mdss_edp_out: endpoint { > + remote-endpoint = <&auo_b140han06_in>; > + }; > + }; > + }; > +}; > + > +&pcie3 { > + perst-gpio = <&tlmm 178 GPIO_ACTIVE_LOW>; > + wake-gpio = <&tlmm 180 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie3_default_state>; > + > + status = "okay"; > +}; > + > +&pcie3_phy { > + vdda-phy-supply = <&vreg_l5e_0p88>; > + vdda-pll-supply = <&vreg_l3c_1p2>; > + > + status = "okay"; > +}; > + > +&pmc8180c_lpg { > + status = "okay"; > +}; > + > +&qupv3_id_0 { > + status = "okay"; > +}; > + > +&qupv3_id_1 { > + status = "okay"; > +}; > + > +&qupv3_id_2 { > + status = "okay"; > +}; > + > +&remoteproc_adsp { > + memory-region = <&adsp_mem>; > + firmware-name = "qcom/sc8180x/qcadsp8180.mbn"; > + > + status = "okay"; > +}; > + > +&remoteproc_cdsp { > + memory-region = <&cdsp_mem>; > + firmware-name = "qcom/sc8180x/qccdsp8180.mbn"; > + > + status = "okay"; > +}; > + > +&remoteproc_mpss { > + memory-region = <&mpss_mem>; > + firmware-name = "qcom/sc8180x/qcmpss8180_nm.mbn"; > + > + status = "okay"; > +}; > + > +&uart13 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart13_state>; > + > + status = "okay"; > + > + bluetooth { > + compatible = "qcom,wcn3998-bt"; > + > + vddio-supply = <&vreg_s4a_1p8>; > + vddxo-supply = <&vreg_l7a_1p8>; > + vddrf-supply = <&vreg_l9a_1p3>; > + vddch0-supply = <&vreg_l11c_3p3>; > + max-speed = <3200000>; > + }; > +}; > + > +&ufs_mem_hc { > + reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>; > + > + vcc-supply = <&vreg_l10e_2p9>; > + vcc-max-microamp = <155000>; > + > + vccq2-supply = <&vreg_l7e_1p8>; > + vccq2-max-microamp = <425000>; > + > + status = "okay"; > +}; > + > +&ufs_mem_phy { > + vdda-phy-supply = <&vreg_l5e_0p88>; > + vdda-pll-supply = <&vreg_l3c_1p2>; > + > + status = "okay"; > +}; > + > +&usb_prim_hsphy { > + vdda-pll-supply = <&vreg_l5e_0p88>; > + vdda18-supply = <&vreg_l12a_1p8>; > + vdda33-supply = <&vreg_l16e_3p0>; > + > + status = "okay"; > +}; > + > +&usb_prim_qmpphy { > + vdda-phy-supply = <&vreg_l3c_1p2>; > + vdda-pll-supply = <&vreg_l5e_0p88>; > + > + status = "okay"; > +}; > + > +&usb_prim { > + status = "okay"; > +}; > + > +&usb_prim_dwc3 { > + dr_mode = "host"; > +}; > + > +&usb_sec_hsphy { > + vdda-pll-supply = <&vreg_l5e_0p88>; > + vdda18-supply = <&vreg_l12a_1p8>; > + vdda33-supply = <&vreg_l16e_3p0>; > + > + status = "okay"; > +}; > + > +&usb_sec_qmpphy { > + vdda-phy-supply = <&vreg_l3c_1p2>; > + vdda-pll-supply = <&vreg_l5e_0p88>; > + > + status = "okay"; > +}; > + > +&usb_sec { > + status = "okay"; > +}; > + > +&usb_sec_dwc3 { > + dr_mode = "host"; > +}; > + > +&wifi { > + memory-region = <&wlan_mem>; > + > + vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>; > + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; > + vdd-1.3-rfa-supply = <&vreg_l9a_1p3>; > + vdd-3.3-ch0-supply = <&vreg_l11c_3p3>; > + vdd-3.3-ch1-supply = <&vreg_l10c_3p3>; > + > + status = "okay"; > +}; > + > +&xo_board_clk { > + clock-frequency = <38400000>; > +}; > + > +/* PINCTRL */ > + > +&pmc8180c_gpios { > + bl_pwm_default_state: bl-pwm-default-state { > + en { This does not look like matching bindings. Did it pass dtbs_check? > + pins = "gpio8"; > + function = "normal"; > + }; > + > + pwm { > + pins = "gpio10"; > + function = "func1"; > + }; > + }; > +}; > + Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index f1c620bb078e..a9de6f50ca37 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -112,6 +112,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc8180x-lenovo-flex-5g.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8180x-primus.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts new file mode 100644 index 000000000000..559a1fb6173f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts @@ -0,0 +1,590 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020-2022, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sc8180x.dtsi" +#include "sc8180x-pmics.dtsi" + +/ { + model = "Lenovo Flex 5G"; + compatible = "lenovo,flex-5g", "qcom,sc8180x"; + + aliases { + serial0 = &uart13; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pmc8180c_lpg 4 1000000>; + enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&bl_pwm_default_state>; + }; + + chosen { + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&hall_int_active_state>; + + lid { + gpios = <&tlmm 121 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; + }; + }; + + reserved-memory { + rmtfs_mem: rmtfs-region@85500000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x85500000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + wlan_mem: wlan-region@8bc00000 { + reg = <0x0 0x8bc00000 0x0 0x180000>; + no-map; + }; + + mpss_mem: mpss-region@8d800000 { + reg = <0x0 0x8d800000 0x0 0x3000000>; + no-map; + }; + + adsp_mem: adsp-region@90800000 { + reg = <0x0 0x90800000 0x0 0x1c00000>; + no-map; + }; + + gpu_mem: gpu-region@98715000 { + reg = <0x0 0x98715000 0x0 0x2000>; + no-map; + }; + + cdsp_mem: cdsp-region@98900000 { + reg = <0x0 0x98900000 0x0 0x1400000>; + no-map; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s4a_1p8: pm8150-s4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + pmc8180-a-rpmh-regulators { + compatible = "qcom,pmc8180-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s5-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2100000>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p3: ldo9 { + regulator-min-microvolt = <1296000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pmc8180c-rpmh-regulators { + compatible = "qcom,pmc8180c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s6-supply = <&vph_pwr>; + vdd-l2-l3-supply = <&vreg_s6c_1p35>; + vdd-bob-supply = <&vph_pwr>; + + vreg_s6c_1p35: smps6 { + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1372000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3350000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pmc8180-e-rpmh-regulators { + compatible = "qcom,pmc8180-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s4e_0p98: smps4 { + regulator-min-microvolt = <992000>; + regulator-max-microvolt = <992000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5e_2p05: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1e_0p75: ldo1 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5e_0p88: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7e_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10e_2p9: ldo10 { + regulator-min-microvolt = <2904000>; + regulator-max-microvolt = <2904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16e_3p0: ldo16 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&dispcc { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn"; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_active>, <&i2c1_hid_active>; + + status = "okay"; + + hid@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c7 { + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_active>, <&i2c7_hid_active>; + + status = "okay"; + + hid@5 { + compatible = "hid-over-i2c"; + reg = <0x5>; + hid-descr-addr = <0x20>; + + interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>; + }; + + hid@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + + interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_edp { + data-lanes = <0 1 2 3>; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_hpd_active>; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + no-hpd; + + backlight = <&backlight>; + + ports { + port { + auo_b140han06_in: endpoint { + remote-endpoint = <&mdss_edp_out>; + }; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + mdss_edp_out: endpoint { + remote-endpoint = <&auo_b140han06_in>; + }; + }; + }; +}; + +&pcie3 { + perst-gpio = <&tlmm 178 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 180 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie3_default_state>; + + status = "okay"; +}; + +&pcie3_phy { + vdda-phy-supply = <&vreg_l5e_0p88>; + vdda-pll-supply = <&vreg_l3c_1p2>; + + status = "okay"; +}; + +&pmc8180c_lpg { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&remoteproc_adsp { + memory-region = <&adsp_mem>; + firmware-name = "qcom/sc8180x/qcadsp8180.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + memory-region = <&cdsp_mem>; + firmware-name = "qcom/sc8180x/qccdsp8180.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + memory-region = <&mpss_mem>; + firmware-name = "qcom/sc8180x/qcmpss8180_nm.mbn"; + + status = "okay"; +}; + +&uart13 { + pinctrl-names = "default"; + pinctrl-0 = <&uart13_state>; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3998-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l9a_1p3>; + vddch0-supply = <&vreg_l11c_3p3>; + max-speed = <3200000>; + }; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10e_2p9>; + vcc-max-microamp = <155000>; + + vccq2-supply = <&vreg_l7e_1p8>; + vccq2-max-microamp = <425000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l5e_0p88>; + vdda-pll-supply = <&vreg_l3c_1p2>; + + status = "okay"; +}; + +&usb_prim_hsphy { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_prim_qmpphy { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + +&usb_prim { + status = "okay"; +}; + +&usb_prim_dwc3 { + dr_mode = "host"; +}; + +&usb_sec_hsphy { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_sec_qmpphy { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + +&usb_sec { + status = "okay"; +}; + +&usb_sec_dwc3 { + dr_mode = "host"; +}; + +&wifi { + memory-region = <&wlan_mem>; + + vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l9a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l11c_3p3>; + vdd-3.3-ch1-supply = <&vreg_l10c_3p3>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL */ + +&pmc8180c_gpios { + bl_pwm_default_state: bl-pwm-default-state { + en { + pins = "gpio8"; + function = "normal"; + }; + + pwm { + pins = "gpio10"; + function = "func1"; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <47 4>, <126 4>; + + edp_hpd_active: epd-hpd-active-state { + pins = "gpio10"; + function = "edp_hot"; + }; + + hall_int_active_state: hall-int-active-state { + pins = "gpio121"; + function = "gpio"; + + input-enable; + bias-disable; + }; + + i2c1_active: i2c1-active-state { + pins = "gpio114", "gpio115"; + function = "qup1"; + + bias-pull-up = <1>; + drive-strength = <2>; + }; + + i2c1_hid_active: i2c1-hid-active-state { + pins = "gpio122"; + function = "gpio"; + + input-enable; + bias-pull-up; + drive-strength = <2>; + }; + + i2c7_active: i2c7-active-state { + pins = "gpio98", "gpio99"; + function = "qup7"; + + bias-pull-up; + drive-strength = <2>; + }; + + i2c7_hid_active: i2c7-hid-active-state { + pins = "gpio37", "gpio24"; + function = "gpio"; + + input-enable; + bias-pull-up; + drive-strength = <2>; + }; + + pcie3_default_state: pcie3-default-state { + clkreq { + pins = "gpio179"; + function = "pci_e3"; + bias-pull-up; + }; + + reset-n { + pins = "gpio178"; + function = "gpio"; + + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + wake-n { + pins = "gpio180"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + }; + + uart13_state: uart13-state { + cts { + pins = "gpio43"; + function = "qup13"; + bias-pull-down; + }; + + rts-tx { + pins = "gpio44", "gpio45"; + function = "qup13"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio46"; + function = "qup13"; + bias-pull-up; + }; + }; +};