diff mbox series

[V3] LoongArch: Add ACPI-based generic laptop driver

Message ID 20220917065250.1671718-1-chenhuacai@loongson.cn
State Superseded
Headers show
Series [V3] LoongArch: Add ACPI-based generic laptop driver | expand

Commit Message

陈华才 Sept. 17, 2022, 6:52 a.m. UTC
From: Jianmin Lv <lvjianmin@loongson.cn>

This add ACPI-based generic laptop driver for Loongson-3. Some of the
codes are derived from drivers/platform/x86/thinkpad_acpi.c.

Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
---
V2: Fix problems pointed out by Arnd.
V3: Use platform driver instead of acpi driver.

 drivers/platform/Kconfig                    |   3 +
 drivers/platform/Makefile                   |   1 +
 drivers/platform/loongarch/Kconfig          |  30 +
 drivers/platform/loongarch/Makefile         |   1 +
 drivers/platform/loongarch/generic-laptop.c | 627 ++++++++++++++++++++
 5 files changed, 662 insertions(+)
 create mode 100644 drivers/platform/loongarch/Kconfig
 create mode 100644 drivers/platform/loongarch/Makefile
 create mode 100644 drivers/platform/loongarch/generic-laptop.c

Comments

Hans de Goede Sept. 17, 2022, 9:41 a.m. UTC | #1
Hi Huacai Chen,

On 9/17/22 08:52, Huacai Chen wrote:
> From: Jianmin Lv <lvjianmin@loongson.cn>
> 
> This add ACPI-based generic laptop driver for Loongson-3. Some of the
> codes are derived from drivers/platform/x86/thinkpad_acpi.c.
> 
> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
> ---
> V2: Fix problems pointed out by Arnd.
> V3: Use platform driver instead of acpi driver.
> 
>  drivers/platform/Kconfig                    |   3 +
>  drivers/platform/Makefile                   |   1 +
>  drivers/platform/loongarch/Kconfig          |  30 +
>  drivers/platform/loongarch/Makefile         |   1 +
>  drivers/platform/loongarch/generic-laptop.c | 627 ++++++++++++++++++++

This is a new top-level directory under drivers/platform. Have you
already thought about which subsystem maintainer is going to be
responsible for merging changing in this directory and sending
the changes to Linus Torvalds?

You may have noticed that I'm the maintainer of:

drivers/platform/mellanox
drivers/platform/olpc
drivers/platform/surface
drivers/platform/x86

But those all are x86 systems, so I'm not sure how qualified I'm
to also take care of the loongarch stuff.

To the other people in the Cc and volunteers to take up maintainership
for this (once it is ready to be merged) ?

>  5 files changed, 662 insertions(+)
>  create mode 100644 drivers/platform/loongarch/Kconfig
>  create mode 100644 drivers/platform/loongarch/Makefile
>  create mode 100644 drivers/platform/loongarch/generic-laptop.c
> 
> diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig
> index b437847b6237..9c68e2def2cb 100644
> --- a/drivers/platform/Kconfig
> +++ b/drivers/platform/Kconfig
> @@ -2,6 +2,9 @@
>  if MIPS
>  source "drivers/platform/mips/Kconfig"
>  endif
> +if LOONGARCH
> +source "drivers/platform/loongarch/Kconfig"
> +endif

Please drop the "if LOONGARCH" and "endif" and instead
add a "depends on LOONGARCH" to "menuconfig LOONGARCH_PLATFORM_DEVICES"
in drivers/platform/loongarch/Kconfig, like all the other subdirs are
doing.

MIPS is the only one using an if directly in drivers/platform/Kconfig
and it would be nice to get rid of the "if MIPS" so that
drivers/platform/Kconfig consistenly just sources all subdir Kconfig-s
leaving the dependency handling to the lower dir Kconfig. At a minimum
we don't want to add more if-s.





>  
>  source "drivers/platform/goldfish/Kconfig"
>  
> diff --git a/drivers/platform/Makefile b/drivers/platform/Makefile
> index 4de08ef4ec9d..41640172975a 100644
> --- a/drivers/platform/Makefile
> +++ b/drivers/platform/Makefile
> @@ -4,6 +4,7 @@
>  #
>  
>  obj-$(CONFIG_X86)		+= x86/
> +obj-$(CONFIG_LOONGARCH)		+= loongarch/
>  obj-$(CONFIG_MELLANOX_PLATFORM)	+= mellanox/
>  obj-$(CONFIG_MIPS)		+= mips/
>  obj-$(CONFIG_OLPC_EC)		+= olpc/
> diff --git a/drivers/platform/loongarch/Kconfig b/drivers/platform/loongarch/Kconfig
> new file mode 100644
> index 000000000000..c2b15f0628b4
> --- /dev/null
> +++ b/drivers/platform/loongarch/Kconfig
> @@ -0,0 +1,30 @@
> +#
> +# LoongArch Platform Specific Drivers
> +#
> +
> +menuconfig LOONGARCH_PLATFORM_DEVICES
> +	bool "LoongArch Platform Specific Device Drivers"
> +	default LOONGARCH

You only source this if LOONGARCH is set, so this is just a fancy
way of writing "default y". If you want to have this enabled by
default for loongarch builds, just use default y.



> +	help
> +	  Say Y here to get to see options for device drivers of various
> +	  LoongArch platforms, including vendor-specific laptop/desktop
> +	  extension and hardware monitor drivers. This option itself does
> +	  not add any kernel code.
> +
> +	  If you say N, all options in this submenu will be skipped and disabled.
> +
> +if LOONGARCH_PLATFORM_DEVICES
> +
> +config GENERIC_LAPTOP

Please make this "config LOONGARCH_GENERIC_LAPTOP", the Kconfig symbol space
is global so GENERIC_LAPTOP is a bit too generic :)

> +	tristate "Generic Loongson-3 Laptop Driver"
> +	depends on ACPI
> +	depends on BACKLIGHT_CLASS_DEVICE
> +	depends on INPUT
> +	depends on MACH_LOONGSON64

Would it make sense to move this depends on into the LOONGARCH_PLATFORM_DEVICES
section ?

> +	select INPUT_EVDEV

No this should never be selected by a driver. If you want this to be
available to userspace it should be enabled in the kernel-s config
when building the kernel. You could put this in a defconfig file
for your arch if you want but it does not belong here.

> +	select INPUT_SPARSEKMAP
> +	default y
> +	help
> +	  ACPI-based Loongson-3 family laptops generic driver.
> +
> +endif # LOONGARCH_PLATFORM_DEVICES
> diff --git a/drivers/platform/loongarch/Makefile b/drivers/platform/loongarch/Makefile
> new file mode 100644
> index 000000000000..3fc44f06125a
> --- /dev/null
> +++ b/drivers/platform/loongarch/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_GENERIC_LAPTOP) += generic-laptop.o

So now the module name is going to be generic-laptop too. The module name namespace
is global, so this IMHO is a bit too generic, please prefix this with
loongarch (just like the Kconfig symbol).

Note I have not looked at the actual driver code below, this is not a full review.

Regards,

Hans



> diff --git a/drivers/platform/loongarch/generic-laptop.c b/drivers/platform/loongarch/generic-laptop.c
> new file mode 100644
> index 000000000000..4198c0542711
> --- /dev/null
> +++ b/drivers/platform/loongarch/generic-laptop.c
> @@ -0,0 +1,627 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + *  Generic Loongson processor based LAPTOP/ALL-IN-ONE driver
> + *
> + *  Jianmin Lv <lvjianmin@loongson.cn>
> + *  Huacai Chen <chenhuacai@loongson.cn>
> + *
> + * Copyright (C) 2022 Loongson Technology Corporation Limited
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/acpi.h>
> +#include <linux/backlight.h>
> +#include <linux/device.h>
> +#include <linux/input.h>
> +#include <linux/input/sparse-keymap.h>
> +#include <linux/platform_device.h>
> +#include <linux/string.h>
> +#include <linux/types.h>
> +#include <acpi/video.h>
> +
> +/* 1. Driver-wide structs and misc. variables */
> +
> +/* ACPI HIDs */
> +#define LOONGSON_ACPI_EC_HID	"PNP0C09"
> +#define LOONGSON_ACPI_HKEY_HID	"LOON0000"
> +
> +#define ACPI_LAPTOP_VERSION "1.0"
> +#define ACPI_LAPTOP_NAME "loongson-laptop"
> +#define ACPI_LAPTOP_DESC "Loongson Laptop/all-in-one ACPI Driver"
> +#define ACPI_LAPTOP_FILE ACPI_LAPTOP_NAME "_acpi"
> +#define ACPI_LAPTOP_DRVR_NAME ACPI_LAPTOP_FILE
> +#define ACPI_LAPTOP_ACPI_EVENT_PREFIX "loongson"
> +
> +#define MAX_ACPI_ARGS			3
> +#define GENERIC_HOTKEY_MAP_MAX		64
> +
> +#define GENERIC_EVENT_TYPE_OFF		12
> +#define GENERIC_EVENT_TYPE_MASK		0xF000
> +#define GENERIC_EVENT_CODE_MASK		0x0FFF
> +
> +struct generic_sub_driver {
> +	u32 type;
> +	char *name;
> +	acpi_handle *handle;
> +	struct acpi_device *device;
> +	struct platform_driver *driver;
> +	int (*init)(struct generic_sub_driver *sub_driver);
> +	void (*notify)(struct generic_sub_driver *sub_driver, u32 event);
> +	u8 acpi_notify_installed;
> +};
> +
> +static u32 input_device_registered;
> +static struct input_dev *generic_inputdev;
> +
> +static acpi_handle hotkey_handle;
> +static struct key_entry hotkey_keycode_map[GENERIC_HOTKEY_MAP_MAX];
> +
> +static int loongson_laptop_backlight_update(struct backlight_device *bd);
> +
> +/* 2. ACPI Helpers and device model */
> +
> +static int acpi_evalf(acpi_handle handle, int *res, char *method, char *fmt, ...)
> +{
> +	char res_type;
> +	char *fmt0 = fmt;
> +	va_list ap;
> +	int success, quiet;
> +	acpi_status status;
> +	struct acpi_object_list params;
> +	struct acpi_buffer result, *resultp;
> +	union acpi_object in_objs[MAX_ACPI_ARGS], out_obj;
> +
> +	if (!*fmt) {
> +		pr_err("acpi_evalf() called with empty format\n");
> +		return 0;
> +	}
> +
> +	if (*fmt == 'q') {
> +		quiet = 1;
> +		fmt++;
> +	} else
> +		quiet = 0;
> +
> +	res_type = *(fmt++);
> +
> +	params.count = 0;
> +	params.pointer = &in_objs[0];
> +
> +	va_start(ap, fmt);
> +	while (*fmt) {
> +		char c = *(fmt++);
> +		switch (c) {
> +		case 'd':	/* int */
> +			in_objs[params.count].integer.value = va_arg(ap, int);
> +			in_objs[params.count++].type = ACPI_TYPE_INTEGER;
> +			break;
> +			/* add more types as needed */
> +		default:
> +			pr_err("acpi_evalf() called with invalid format character '%c'\n", c);
> +			va_end(ap);
> +			return 0;
> +		}
> +	}
> +	va_end(ap);
> +
> +	if (res_type != 'v') {
> +		result.length = sizeof(out_obj);
> +		result.pointer = &out_obj;
> +		resultp = &result;
> +	} else
> +		resultp = NULL;
> +
> +	status = acpi_evaluate_object(handle, method, &params, resultp);
> +
> +	switch (res_type) {
> +	case 'd':		/* int */
> +		success = (status == AE_OK && out_obj.type == ACPI_TYPE_INTEGER);
> +		if (success && res)
> +			*res = out_obj.integer.value;
> +		break;
> +	case 'v':		/* void */
> +		success = status == AE_OK;
> +		break;
> +		/* add more types as needed */
> +	default:
> +		pr_err("acpi_evalf() called with invalid format character '%c'\n", res_type);
> +		return 0;
> +	}
> +
> +	if (!success && !quiet)
> +		pr_err("acpi_evalf(%s, %s, ...) failed: %s\n",
> +		       method, fmt0, acpi_format_exception(status));
> +
> +	return success;
> +}
> +
> +static int hotkey_status_get(int *status)
> +{
> +	if (!acpi_evalf(hotkey_handle, status, "GSWS", "d"))
> +		return -EIO;
> +
> +	return 0;
> +}
> +
> +static void dispatch_acpi_notify(acpi_handle handle, u32 event, void *data)
> +{
> +	struct generic_sub_driver *sub_driver = data;
> +
> +	if (!sub_driver || !sub_driver->notify)
> +		return;
> +	sub_driver->notify(sub_driver, event);
> +}
> +
> +static int __init setup_acpi_notify(struct generic_sub_driver *sub_driver)
> +{
> +	acpi_status status;
> +
> +	if (!*sub_driver->handle)
> +		return 0;
> +
> +	sub_driver->device = acpi_fetch_acpi_dev(*sub_driver->handle);
> +	if (!sub_driver->device) {
> +		pr_err("acpi_fetch_acpi_dev(%s) failed\n", sub_driver->name);
> +		return -ENODEV;
> +	}
> +
> +	sub_driver->device->driver_data = sub_driver;
> +	sprintf(acpi_device_class(sub_driver->device), "%s/%s",
> +		ACPI_LAPTOP_ACPI_EVENT_PREFIX, sub_driver->name);
> +
> +	status = acpi_install_notify_handler(*sub_driver->handle,
> +			sub_driver->type, dispatch_acpi_notify, sub_driver);
> +	if (ACPI_FAILURE(status)) {
> +		if (status == AE_ALREADY_EXISTS) {
> +			pr_notice("Another device driver is already "
> +				  "handling %s events\n", sub_driver->name);
> +		} else {
> +			pr_err("acpi_install_notify_handler(%s) failed: %s\n",
> +			       sub_driver->name, acpi_format_exception(status));
> +		}
> +		return -ENODEV;
> +	}
> +	sub_driver->acpi_notify_installed = 1;
> +
> +	return 0;
> +}
> +
> +static int loongson_hotkey_suspend(struct device *dev)
> +{
> +	return 0;
> +}
> +
> +static int loongson_hotkey_resume(struct device *dev)
> +{
> +	int status = 0;
> +	struct key_entry ke;
> +	struct backlight_device *bd;
> +
> +	/*
> +	 * Only if the firmware supports SW_LID event model, we can handle the
> +	 * event. This is for the consideration of development board without EC.
> +	 */
> +	if (test_bit(SW_LID, generic_inputdev->swbit)) {
> +		if (hotkey_status_get(&status) < 0)
> +			return -EIO;
> +		/*
> +		 * The input device sw element records the last lid status.
> +		 * When the system is awakened by other wake-up sources,
> +		 * the lid event will also be reported. The judgment of
> +		 * adding SW_LID bit which in sw element can avoid this
> +		 * case.
> +		 *
> +		 * Input system will drop lid event when current lid event
> +		 * value and last lid status in the same. So laptop driver
> +		 * doesn't report repeated events.
> +		 *
> +		 * Lid status is generally 0, but hardware exception is
> +		 * considered. So add lid status confirmation.
> +		 */
> +		if (test_bit(SW_LID, generic_inputdev->sw) && !(status & (1 << SW_LID))) {
> +			ke.type = KE_SW;
> +			ke.sw.value = (u8)status;
> +			ke.sw.code = SW_LID;
> +			sparse_keymap_report_entry(generic_inputdev, &ke, 1, true);
> +		}
> +	}
> +
> +	bd = backlight_device_get_by_type(BACKLIGHT_PLATFORM);
> +	if (bd) {
> +		loongson_laptop_backlight_update(bd) ?
> +		pr_warn("Loongson_backlight: resume brightness failed") :
> +		pr_info("Loongson_backlight: resume brightness %d\n", bd->props.brightness);
> +	}
> +
> +	return 0;
> +}
> +
> +static DEFINE_SIMPLE_DEV_PM_OPS(loongson_hotkey_pm,
> +		loongson_hotkey_suspend, loongson_hotkey_resume);
> +
> +static int loongson_hotkey_probe(struct platform_device *pdev)
> +{
> +	hotkey_handle = ACPI_HANDLE(&pdev->dev);
> +
> +	if (!hotkey_handle)
> +		return -ENODEV;
> +
> +	return 0;
> +}
> +
> +static const struct acpi_device_id loongson_htk_device_ids[] = {
> +	{LOONGSON_ACPI_HKEY_HID, 0},
> +	{"", 0},
> +};
> +
> +static struct platform_driver loongson_hotkey_driver = {
> +	.probe		= loongson_hotkey_probe,
> +	.driver		= {
> +		.name	= "loongson-hotkey",
> +		.owner	= THIS_MODULE,
> +		.pm	= pm_ptr(&loongson_hotkey_pm),
> +		.acpi_match_table = ACPI_PTR(loongson_htk_device_ids),
> +	},
> +};
> +
> +static int hotkey_map(void)
> +{
> +	u32 index;
> +	acpi_status status;
> +	struct acpi_buffer buf;
> +	union acpi_object *pack;
> +
> +	buf.length = ACPI_ALLOCATE_BUFFER;
> +	status = acpi_evaluate_object_typed(hotkey_handle, "KMAP", NULL, &buf, ACPI_TYPE_PACKAGE);
> +	if (status != AE_OK) {
> +		pr_err("ACPI exception: %s\n", acpi_format_exception(status));
> +		return -1;
> +	}
> +	pack = buf.pointer;
> +	for (index = 0; index < pack->package.count; index++) {
> +		union acpi_object *element, *sub_pack;
> +
> +		sub_pack = &pack->package.elements[index];
> +
> +		element = &sub_pack->package.elements[0];
> +		hotkey_keycode_map[index].type = element->integer.value;
> +		element = &sub_pack->package.elements[1];
> +		hotkey_keycode_map[index].code = element->integer.value;
> +		element = &sub_pack->package.elements[2];
> +		hotkey_keycode_map[index].keycode = element->integer.value;
> +	}
> +
> +	return 0;
> +}
> +
> +static int hotkey_backlight_set(bool enable)
> +{
> +	if (!acpi_evalf(hotkey_handle, NULL, "VCBL", "vd", enable ? 1 : 0))
> +		return -EIO;
> +
> +	return 0;
> +}
> +
> +static int ec_get_brightness(void)
> +{
> +	int status = 0;
> +
> +	if (!hotkey_handle)
> +		return -ENXIO;
> +
> +	if (!acpi_evalf(hotkey_handle, &status, "ECBG", "d"))
> +		return -EIO;
> +
> +	if (status < 0)
> +		return status;
> +
> +	return status;
> +}
> +
> +static int ec_set_brightness(int level)
> +{
> +
> +	int ret = 0;
> +
> +	if (!hotkey_handle)
> +		return -ENXIO;
> +
> +	if (!acpi_evalf(hotkey_handle, NULL, "ECBS", "vd", level))
> +		ret = -EIO;
> +
> +	return ret;
> +}
> +
> +static int ec_backlight_level(u8 level)
> +{
> +	int status = 0;
> +
> +	if (!hotkey_handle)
> +		return -ENXIO;
> +
> +	if (!acpi_evalf(hotkey_handle, &status, "ECLL", "d"))
> +		return -EIO;
> +
> +	if ((status < 0) || (level > status))
> +		return status;
> +
> +	if (!acpi_evalf(hotkey_handle, &status, "ECSL", "d"))
> +		return -EIO;
> +
> +	if ((status < 0) || (level < status))
> +		return status;
> +
> +	return level;
> +}
> +
> +static int loongson_laptop_backlight_update(struct backlight_device *bd)
> +{
> +	int lvl = ec_backlight_level(bd->props.brightness);
> +
> +	if (lvl < 0)
> +		return -EIO;
> +	if (ec_set_brightness(lvl))
> +		return -EIO;
> +
> +	return 0;
> +}
> +
> +static int loongson_laptop_get_brightness(struct backlight_device *bd)
> +{
> +	u8 level;
> +
> +	level = ec_get_brightness();
> +	if (level < 0)
> +		return -EIO;
> +
> +	return level;
> +}
> +
> +static const struct backlight_ops backlight_laptop_ops = {
> +	.update_status = loongson_laptop_backlight_update,
> +	.get_brightness = loongson_laptop_get_brightness,
> +};
> +
> +static int laptop_backlight_register(void)
> +{
> +	int status = 0;
> +	struct backlight_properties props;
> +
> +	memset(&props, 0, sizeof(props));
> +
> +	if (!acpi_evalf(hotkey_handle, &status, "ECLL", "d"))
> +		return -EIO;
> +
> +	props.brightness = 1;
> +	props.max_brightness = status;
> +	props.type = BACKLIGHT_PLATFORM;
> +
> +	backlight_device_register("loongson_laptop",
> +				NULL, NULL, &backlight_laptop_ops, &props);
> +
> +	return 0;
> +}
> +
> +int loongson_laptop_turn_on_backlight(void)
> +{
> +	int status;
> +	union acpi_object arg0 = { ACPI_TYPE_INTEGER };
> +	struct acpi_object_list args = { 1, &arg0 };
> +
> +	arg0.integer.value = 1;
> +	status = acpi_evaluate_object(NULL, "\\BLSW", &args, NULL);
> +	if (ACPI_FAILURE(status)) {
> +		pr_info("Loongson lvds error: 0x%x\n", status);
> +		return -ENODEV;
> +	}
> +
> +	return 0;
> +}
> +
> +int loongson_laptop_turn_off_backlight(void)
> +{
> +	int status;
> +	union acpi_object arg0 = { ACPI_TYPE_INTEGER };
> +	struct acpi_object_list args = { 1, &arg0 };
> +
> +	arg0.integer.value = 0;
> +	status = acpi_evaluate_object(NULL, "\\BLSW", &args, NULL);
> +	if (ACPI_FAILURE(status)) {
> +		pr_info("Loongson lvds error: 0x%x\n", status);
> +		return -ENODEV;
> +	}
> +
> +	return 0;
> +}
> +
> +static int __init event_init(struct generic_sub_driver *sub_driver)
> +{
> +	int ret;
> +
> +	ret = hotkey_map();
> +	if (ret < 0) {
> +		pr_err("Failed to parse keymap from DSDT\n");
> +		return ret;
> +	}
> +
> +	ret = sparse_keymap_setup(generic_inputdev, hotkey_keycode_map, NULL);
> +	if (ret < 0) {
> +		pr_err("Failed to setup input device keymap\n");
> +		input_free_device(generic_inputdev);
> +
> +		return ret;
> +	}
> +
> +	/*
> +	 * This hotkey driver handle backlight event when
> +	 * acpi_video_get_backlight_type() gets acpi_backlight_vendor
> +	 */
> +	if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
> +		hotkey_backlight_set(false);
> +	else
> +		hotkey_backlight_set(true);
> +
> +	pr_info("ACPI: enabling firmware HKEY event interface...\n");
> +
> +	return ret;
> +}
> +
> +static void event_notify(struct generic_sub_driver *sub_driver, u32 event)
> +{
> +	int type, scan_code;
> +	struct key_entry *ke = NULL;
> +
> +	scan_code = event & GENERIC_EVENT_CODE_MASK;
> +	type = (event & GENERIC_EVENT_TYPE_MASK) >> GENERIC_EVENT_TYPE_OFF;
> +	ke = sparse_keymap_entry_from_scancode(generic_inputdev, scan_code);
> +	if (ke) {
> +		if (type == KE_SW) {
> +			int status = 0;
> +
> +			if (hotkey_status_get(&status) < 0)
> +				return;
> +
> +			ke->sw.value = !!(status & (1 << ke->sw.code));
> +		}
> +		sparse_keymap_report_entry(generic_inputdev, ke, 1, true);
> +	}
> +}
> +
> +/* 3. Infrastructure */
> +
> +static void generic_subdriver_exit(struct generic_sub_driver *sub_driver);
> +
> +static int __init generic_subdriver_init(struct generic_sub_driver *sub_driver)
> +{
> +	int ret;
> +
> +	BUG_ON(!sub_driver);
> +
> +	if (!sub_driver || !sub_driver->driver)
> +		return -EINVAL;
> +
> +	ret = platform_driver_register(sub_driver->driver);
> +	if (ret)
> +		return -EINVAL;
> +
> +	if (sub_driver->init)
> +		sub_driver->init(sub_driver);
> +
> +	if (sub_driver->notify) {
> +		ret = setup_acpi_notify(sub_driver);
> +		if (ret == -ENODEV) {
> +			ret = 0;
> +			goto err_out;
> +		}
> +		if (ret < 0)
> +			goto err_out;
> +	}
> +
> +	return 0;
> +
> +err_out:
> +	generic_subdriver_exit(sub_driver);
> +	return (ret < 0) ? ret : 0;
> +}
> +
> +static void generic_subdriver_exit(struct generic_sub_driver *sub_driver)
> +{
> +
> +	if (sub_driver->acpi_notify_installed) {
> +		acpi_remove_notify_handler(*sub_driver->handle,
> +					   sub_driver->type, dispatch_acpi_notify);
> +		sub_driver->acpi_notify_installed = 0;
> +	}
> +}
> +
> +static struct generic_sub_driver generic_sub_drivers[] __refdata = {
> +	{
> +		.name = "hotkey",
> +		.init = event_init,
> +		.notify = event_notify,
> +		.handle = &hotkey_handle,
> +		.type = ACPI_DEVICE_NOTIFY,
> +		.driver = &loongson_hotkey_driver,
> +	},
> +};
> +
> +static int __init generic_acpi_laptop_init(void)
> +{
> +	bool ec_found;
> +	int i, ret, status;
> +
> +	if (acpi_disabled)
> +		return -ENODEV;
> +
> +	/* The EC device is required */
> +	ec_found = acpi_dev_found(LOONGSON_ACPI_EC_HID);
> +	if (!ec_found)
> +		return -ENODEV;
> +
> +	/* Enable SCI for EC */
> +	acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
> +
> +	generic_inputdev = input_allocate_device();
> +	if (!generic_inputdev) {
> +		pr_err("Unable to allocate input device\n");
> +		return -ENOMEM;
> +	}
> +
> +	/* Prepare input device, but don't register */
> +	generic_inputdev->name =
> +		"Loongson Generic Laptop/All-in-one Extra Buttons";
> +	generic_inputdev->phys = ACPI_LAPTOP_DRVR_NAME "/input0";
> +	generic_inputdev->id.bustype = BUS_HOST;
> +	generic_inputdev->dev.parent = NULL;
> +
> +	/* Init subdrivers */
> +	for (i = 0; i < ARRAY_SIZE(generic_sub_drivers); i++) {
> +		ret = generic_subdriver_init(&generic_sub_drivers[i]);
> +		if (ret < 0) {
> +			input_free_device(generic_inputdev);
> +			return ret;
> +		}
> +	}
> +
> +	ret = input_register_device(generic_inputdev);
> +	if (ret < 0) {
> +		input_free_device(generic_inputdev);
> +		pr_err("Unable to register input device\n");
> +		return ret;
> +	}
> +
> +	input_device_registered = 1;
> +
> +	if (acpi_evalf(hotkey_handle, &status, "ECBG", "d")) {
> +		pr_info("Loongson Laptop used, init brightness is 0x%x\n", status);
> +		ret = laptop_backlight_register();
> +		if (ret < 0)
> +			pr_err("Loongson Laptop: laptop-backlight device register failed\n");
> +	}
> +
> +	return 0;
> +}
> +
> +static void __exit generic_acpi_laptop_exit(void)
> +{
> +	if (generic_inputdev) {
> +		if (input_device_registered)
> +			input_unregister_device(generic_inputdev);
> +		else
> +			input_free_device(generic_inputdev);
> +	}
> +}
> +
> +module_init(generic_acpi_laptop_init);
> +module_exit(generic_acpi_laptop_exit);
> +
> +MODULE_ALIAS("platform:acpi-laptop");
> +MODULE_AUTHOR("Jianmin Lv <lvjianmin@loongson.cn>");
> +MODULE_AUTHOR("Huacai Chen <chenhuacai@loongson.cn>");
> +MODULE_DESCRIPTION(ACPI_LAPTOP_DESC);
> +MODULE_VERSION(ACPI_LAPTOP_VERSION);
> +MODULE_LICENSE("GPL");
Huacai Chen Sept. 17, 2022, 3:34 p.m. UTC | #2
Hi, Hans,

On Sat, Sep 17, 2022 at 5:42 PM Hans de Goede <hdegoede@redhat.com> wrote:
>
> Hi Huacai Chen,
>
> On 9/17/22 08:52, Huacai Chen wrote:
> > From: Jianmin Lv <lvjianmin@loongson.cn>
> >
> > This add ACPI-based generic laptop driver for Loongson-3. Some of the
> > codes are derived from drivers/platform/x86/thinkpad_acpi.c.
> >
> > Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
> > Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
> > ---
> > V2: Fix problems pointed out by Arnd.
> > V3: Use platform driver instead of acpi driver.
> >
> >  drivers/platform/Kconfig                    |   3 +
> >  drivers/platform/Makefile                   |   1 +
> >  drivers/platform/loongarch/Kconfig          |  30 +
> >  drivers/platform/loongarch/Makefile         |   1 +
> >  drivers/platform/loongarch/generic-laptop.c | 627 ++++++++++++++++++++
>
> This is a new top-level directory under drivers/platform. Have you
> already thought about which subsystem maintainer is going to be
> responsible for merging changing in this directory and sending
> the changes to Linus Torvalds?
>
> You may have noticed that I'm the maintainer of:
>
> drivers/platform/mellanox
> drivers/platform/olpc
> drivers/platform/surface
> drivers/platform/x86
>
> But those all are x86 systems, so I'm not sure how qualified I'm
> to also take care of the loongarch stuff.
>
> To the other people in the Cc and volunteers to take up maintainership
> for this (once it is ready to be merged) ?
Since I'm not an expert of platform drivers, I hope this driver can be
reviewed by related maintainers. I will maintain it as part of the
LoongArch tree after being merged, thanks.

>
> >  5 files changed, 662 insertions(+)
> >  create mode 100644 drivers/platform/loongarch/Kconfig
> >  create mode 100644 drivers/platform/loongarch/Makefile
> >  create mode 100644 drivers/platform/loongarch/generic-laptop.c
> >
> > diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig
> > index b437847b6237..9c68e2def2cb 100644
> > --- a/drivers/platform/Kconfig
> > +++ b/drivers/platform/Kconfig
> > @@ -2,6 +2,9 @@
> >  if MIPS
> >  source "drivers/platform/mips/Kconfig"
> >  endif
> > +if LOONGARCH
> > +source "drivers/platform/loongarch/Kconfig"
> > +endif
>
> Please drop the "if LOONGARCH" and "endif" and instead
> add a "depends on LOONGARCH" to "menuconfig LOONGARCH_PLATFORM_DEVICES"
> in drivers/platform/loongarch/Kconfig, like all the other subdirs are
> doing.
OK, thanks.

>
> MIPS is the only one using an if directly in drivers/platform/Kconfig
> and it would be nice to get rid of the "if MIPS" so that
> drivers/platform/Kconfig consistenly just sources all subdir Kconfig-s
> leaving the dependency handling to the lower dir Kconfig. At a minimum
> we don't want to add more if-s.
I will modify that for MIPS, thanks.

>
>
>
>
>
> >
> >  source "drivers/platform/goldfish/Kconfig"
> >
> > diff --git a/drivers/platform/Makefile b/drivers/platform/Makefile
> > index 4de08ef4ec9d..41640172975a 100644
> > --- a/drivers/platform/Makefile
> > +++ b/drivers/platform/Makefile
> > @@ -4,6 +4,7 @@
> >  #
> >
> >  obj-$(CONFIG_X86)            += x86/
> > +obj-$(CONFIG_LOONGARCH)              += loongarch/
> >  obj-$(CONFIG_MELLANOX_PLATFORM)      += mellanox/
> >  obj-$(CONFIG_MIPS)           += mips/
> >  obj-$(CONFIG_OLPC_EC)                += olpc/
> > diff --git a/drivers/platform/loongarch/Kconfig b/drivers/platform/loongarch/Kconfig
> > new file mode 100644
> > index 000000000000..c2b15f0628b4
> > --- /dev/null
> > +++ b/drivers/platform/loongarch/Kconfig
> > @@ -0,0 +1,30 @@
> > +#
> > +# LoongArch Platform Specific Drivers
> > +#
> > +
> > +menuconfig LOONGARCH_PLATFORM_DEVICES
> > +     bool "LoongArch Platform Specific Device Drivers"
> > +     default LOONGARCH
>
> You only source this if LOONGARCH is set, so this is just a fancy
> way of writing "default y". If you want to have this enabled by
> default for loongarch builds, just use default y.
OK, thanks.

>
>
>
> > +     help
> > +       Say Y here to get to see options for device drivers of various
> > +       LoongArch platforms, including vendor-specific laptop/desktop
> > +       extension and hardware monitor drivers. This option itself does
> > +       not add any kernel code.
> > +
> > +       If you say N, all options in this submenu will be skipped and disabled.
> > +
> > +if LOONGARCH_PLATFORM_DEVICES
> > +
> > +config GENERIC_LAPTOP
>
> Please make this "config LOONGARCH_GENERIC_LAPTOP", the Kconfig symbol space
> is global so GENERIC_LAPTOP is a bit too generic :)
Emm, GENERIC_LAPTOP is not a good name, maybe LOONGSON_LAPTOP is better.
>
> > +     tristate "Generic Loongson-3 Laptop Driver"
> > +     depends on ACPI
> > +     depends on BACKLIGHT_CLASS_DEVICE
> > +     depends on INPUT
> > +     depends on MACH_LOONGSON64
>
> Would it make sense to move this depends on into the LOONGARCH_PLATFORM_DEVICES
> section ?
More drivers will be added in future and not all of them are limited
to 64bit, so keep it as is may be appropriate.

>
> > +     select INPUT_EVDEV
>
> No this should never be selected by a driver. If you want this to be
> available to userspace it should be enabled in the kernel-s config
> when building the kernel. You could put this in a defconfig file
> for your arch if you want but it does not belong here.
OK, this will be removed, thanks.

>
> > +     select INPUT_SPARSEKMAP
> > +     default y
> > +     help
> > +       ACPI-based Loongson-3 family laptops generic driver.
> > +
> > +endif # LOONGARCH_PLATFORM_DEVICES
> > diff --git a/drivers/platform/loongarch/Makefile b/drivers/platform/loongarch/Makefile
> > new file mode 100644
> > index 000000000000..3fc44f06125a
> > --- /dev/null
> > +++ b/drivers/platform/loongarch/Makefile
> > @@ -0,0 +1 @@
> > +obj-$(CONFIG_GENERIC_LAPTOP) += generic-laptop.o
>
> So now the module name is going to be generic-laptop too. The module name namespace
> is global, so this IMHO is a bit too generic, please prefix this with
> loongarch (just like the Kconfig symbol).
OK, this will be renamed, thanks.

Huacai
>
> Note I have not looked at the actual driver code below, this is not a full review.
>
> Regards,
>
> Hans
>
>
>
> > diff --git a/drivers/platform/loongarch/generic-laptop.c b/drivers/platform/loongarch/generic-laptop.c
> > new file mode 100644
> > index 000000000000..4198c0542711
> > --- /dev/null
> > +++ b/drivers/platform/loongarch/generic-laptop.c
> > @@ -0,0 +1,627 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + *  Generic Loongson processor based LAPTOP/ALL-IN-ONE driver
> > + *
> > + *  Jianmin Lv <lvjianmin@loongson.cn>
> > + *  Huacai Chen <chenhuacai@loongson.cn>
> > + *
> > + * Copyright (C) 2022 Loongson Technology Corporation Limited
> > + */
> > +
> > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> > +
> > +#include <linux/init.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/acpi.h>
> > +#include <linux/backlight.h>
> > +#include <linux/device.h>
> > +#include <linux/input.h>
> > +#include <linux/input/sparse-keymap.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/string.h>
> > +#include <linux/types.h>
> > +#include <acpi/video.h>
> > +
> > +/* 1. Driver-wide structs and misc. variables */
> > +
> > +/* ACPI HIDs */
> > +#define LOONGSON_ACPI_EC_HID "PNP0C09"
> > +#define LOONGSON_ACPI_HKEY_HID       "LOON0000"
> > +
> > +#define ACPI_LAPTOP_VERSION "1.0"
> > +#define ACPI_LAPTOP_NAME "loongson-laptop"
> > +#define ACPI_LAPTOP_DESC "Loongson Laptop/all-in-one ACPI Driver"
> > +#define ACPI_LAPTOP_FILE ACPI_LAPTOP_NAME "_acpi"
> > +#define ACPI_LAPTOP_DRVR_NAME ACPI_LAPTOP_FILE
> > +#define ACPI_LAPTOP_ACPI_EVENT_PREFIX "loongson"
> > +
> > +#define MAX_ACPI_ARGS                        3
> > +#define GENERIC_HOTKEY_MAP_MAX               64
> > +
> > +#define GENERIC_EVENT_TYPE_OFF               12
> > +#define GENERIC_EVENT_TYPE_MASK              0xF000
> > +#define GENERIC_EVENT_CODE_MASK              0x0FFF
> > +
> > +struct generic_sub_driver {
> > +     u32 type;
> > +     char *name;
> > +     acpi_handle *handle;
> > +     struct acpi_device *device;
> > +     struct platform_driver *driver;
> > +     int (*init)(struct generic_sub_driver *sub_driver);
> > +     void (*notify)(struct generic_sub_driver *sub_driver, u32 event);
> > +     u8 acpi_notify_installed;
> > +};
> > +
> > +static u32 input_device_registered;
> > +static struct input_dev *generic_inputdev;
> > +
> > +static acpi_handle hotkey_handle;
> > +static struct key_entry hotkey_keycode_map[GENERIC_HOTKEY_MAP_MAX];
> > +
> > +static int loongson_laptop_backlight_update(struct backlight_device *bd);
> > +
> > +/* 2. ACPI Helpers and device model */
> > +
> > +static int acpi_evalf(acpi_handle handle, int *res, char *method, char *fmt, ...)
> > +{
> > +     char res_type;
> > +     char *fmt0 = fmt;
> > +     va_list ap;
> > +     int success, quiet;
> > +     acpi_status status;
> > +     struct acpi_object_list params;
> > +     struct acpi_buffer result, *resultp;
> > +     union acpi_object in_objs[MAX_ACPI_ARGS], out_obj;
> > +
> > +     if (!*fmt) {
> > +             pr_err("acpi_evalf() called with empty format\n");
> > +             return 0;
> > +     }
> > +
> > +     if (*fmt == 'q') {
> > +             quiet = 1;
> > +             fmt++;
> > +     } else
> > +             quiet = 0;
> > +
> > +     res_type = *(fmt++);
> > +
> > +     params.count = 0;
> > +     params.pointer = &in_objs[0];
> > +
> > +     va_start(ap, fmt);
> > +     while (*fmt) {
> > +             char c = *(fmt++);
> > +             switch (c) {
> > +             case 'd':       /* int */
> > +                     in_objs[params.count].integer.value = va_arg(ap, int);
> > +                     in_objs[params.count++].type = ACPI_TYPE_INTEGER;
> > +                     break;
> > +                     /* add more types as needed */
> > +             default:
> > +                     pr_err("acpi_evalf() called with invalid format character '%c'\n", c);
> > +                     va_end(ap);
> > +                     return 0;
> > +             }
> > +     }
> > +     va_end(ap);
> > +
> > +     if (res_type != 'v') {
> > +             result.length = sizeof(out_obj);
> > +             result.pointer = &out_obj;
> > +             resultp = &result;
> > +     } else
> > +             resultp = NULL;
> > +
> > +     status = acpi_evaluate_object(handle, method, &params, resultp);
> > +
> > +     switch (res_type) {
> > +     case 'd':               /* int */
> > +             success = (status == AE_OK && out_obj.type == ACPI_TYPE_INTEGER);
> > +             if (success && res)
> > +                     *res = out_obj.integer.value;
> > +             break;
> > +     case 'v':               /* void */
> > +             success = status == AE_OK;
> > +             break;
> > +             /* add more types as needed */
> > +     default:
> > +             pr_err("acpi_evalf() called with invalid format character '%c'\n", res_type);
> > +             return 0;
> > +     }
> > +
> > +     if (!success && !quiet)
> > +             pr_err("acpi_evalf(%s, %s, ...) failed: %s\n",
> > +                    method, fmt0, acpi_format_exception(status));
> > +
> > +     return success;
> > +}
> > +
> > +static int hotkey_status_get(int *status)
> > +{
> > +     if (!acpi_evalf(hotkey_handle, status, "GSWS", "d"))
> > +             return -EIO;
> > +
> > +     return 0;
> > +}
> > +
> > +static void dispatch_acpi_notify(acpi_handle handle, u32 event, void *data)
> > +{
> > +     struct generic_sub_driver *sub_driver = data;
> > +
> > +     if (!sub_driver || !sub_driver->notify)
> > +             return;
> > +     sub_driver->notify(sub_driver, event);
> > +}
> > +
> > +static int __init setup_acpi_notify(struct generic_sub_driver *sub_driver)
> > +{
> > +     acpi_status status;
> > +
> > +     if (!*sub_driver->handle)
> > +             return 0;
> > +
> > +     sub_driver->device = acpi_fetch_acpi_dev(*sub_driver->handle);
> > +     if (!sub_driver->device) {
> > +             pr_err("acpi_fetch_acpi_dev(%s) failed\n", sub_driver->name);
> > +             return -ENODEV;
> > +     }
> > +
> > +     sub_driver->device->driver_data = sub_driver;
> > +     sprintf(acpi_device_class(sub_driver->device), "%s/%s",
> > +             ACPI_LAPTOP_ACPI_EVENT_PREFIX, sub_driver->name);
> > +
> > +     status = acpi_install_notify_handler(*sub_driver->handle,
> > +                     sub_driver->type, dispatch_acpi_notify, sub_driver);
> > +     if (ACPI_FAILURE(status)) {
> > +             if (status == AE_ALREADY_EXISTS) {
> > +                     pr_notice("Another device driver is already "
> > +                               "handling %s events\n", sub_driver->name);
> > +             } else {
> > +                     pr_err("acpi_install_notify_handler(%s) failed: %s\n",
> > +                            sub_driver->name, acpi_format_exception(status));
> > +             }
> > +             return -ENODEV;
> > +     }
> > +     sub_driver->acpi_notify_installed = 1;
> > +
> > +     return 0;
> > +}
> > +
> > +static int loongson_hotkey_suspend(struct device *dev)
> > +{
> > +     return 0;
> > +}
> > +
> > +static int loongson_hotkey_resume(struct device *dev)
> > +{
> > +     int status = 0;
> > +     struct key_entry ke;
> > +     struct backlight_device *bd;
> > +
> > +     /*
> > +      * Only if the firmware supports SW_LID event model, we can handle the
> > +      * event. This is for the consideration of development board without EC.
> > +      */
> > +     if (test_bit(SW_LID, generic_inputdev->swbit)) {
> > +             if (hotkey_status_get(&status) < 0)
> > +                     return -EIO;
> > +             /*
> > +              * The input device sw element records the last lid status.
> > +              * When the system is awakened by other wake-up sources,
> > +              * the lid event will also be reported. The judgment of
> > +              * adding SW_LID bit which in sw element can avoid this
> > +              * case.
> > +              *
> > +              * Input system will drop lid event when current lid event
> > +              * value and last lid status in the same. So laptop driver
> > +              * doesn't report repeated events.
> > +              *
> > +              * Lid status is generally 0, but hardware exception is
> > +              * considered. So add lid status confirmation.
> > +              */
> > +             if (test_bit(SW_LID, generic_inputdev->sw) && !(status & (1 << SW_LID))) {
> > +                     ke.type = KE_SW;
> > +                     ke.sw.value = (u8)status;
> > +                     ke.sw.code = SW_LID;
> > +                     sparse_keymap_report_entry(generic_inputdev, &ke, 1, true);
> > +             }
> > +     }
> > +
> > +     bd = backlight_device_get_by_type(BACKLIGHT_PLATFORM);
> > +     if (bd) {
> > +             loongson_laptop_backlight_update(bd) ?
> > +             pr_warn("Loongson_backlight: resume brightness failed") :
> > +             pr_info("Loongson_backlight: resume brightness %d\n", bd->props.brightness);
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> > +static DEFINE_SIMPLE_DEV_PM_OPS(loongson_hotkey_pm,
> > +             loongson_hotkey_suspend, loongson_hotkey_resume);
> > +
> > +static int loongson_hotkey_probe(struct platform_device *pdev)
> > +{
> > +     hotkey_handle = ACPI_HANDLE(&pdev->dev);
> > +
> > +     if (!hotkey_handle)
> > +             return -ENODEV;
> > +
> > +     return 0;
> > +}
> > +
> > +static const struct acpi_device_id loongson_htk_device_ids[] = {
> > +     {LOONGSON_ACPI_HKEY_HID, 0},
> > +     {"", 0},
> > +};
> > +
> > +static struct platform_driver loongson_hotkey_driver = {
> > +     .probe          = loongson_hotkey_probe,
> > +     .driver         = {
> > +             .name   = "loongson-hotkey",
> > +             .owner  = THIS_MODULE,
> > +             .pm     = pm_ptr(&loongson_hotkey_pm),
> > +             .acpi_match_table = ACPI_PTR(loongson_htk_device_ids),
> > +     },
> > +};
> > +
> > +static int hotkey_map(void)
> > +{
> > +     u32 index;
> > +     acpi_status status;
> > +     struct acpi_buffer buf;
> > +     union acpi_object *pack;
> > +
> > +     buf.length = ACPI_ALLOCATE_BUFFER;
> > +     status = acpi_evaluate_object_typed(hotkey_handle, "KMAP", NULL, &buf, ACPI_TYPE_PACKAGE);
> > +     if (status != AE_OK) {
> > +             pr_err("ACPI exception: %s\n", acpi_format_exception(status));
> > +             return -1;
> > +     }
> > +     pack = buf.pointer;
> > +     for (index = 0; index < pack->package.count; index++) {
> > +             union acpi_object *element, *sub_pack;
> > +
> > +             sub_pack = &pack->package.elements[index];
> > +
> > +             element = &sub_pack->package.elements[0];
> > +             hotkey_keycode_map[index].type = element->integer.value;
> > +             element = &sub_pack->package.elements[1];
> > +             hotkey_keycode_map[index].code = element->integer.value;
> > +             element = &sub_pack->package.elements[2];
> > +             hotkey_keycode_map[index].keycode = element->integer.value;
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> > +static int hotkey_backlight_set(bool enable)
> > +{
> > +     if (!acpi_evalf(hotkey_handle, NULL, "VCBL", "vd", enable ? 1 : 0))
> > +             return -EIO;
> > +
> > +     return 0;
> > +}
> > +
> > +static int ec_get_brightness(void)
> > +{
> > +     int status = 0;
> > +
> > +     if (!hotkey_handle)
> > +             return -ENXIO;
> > +
> > +     if (!acpi_evalf(hotkey_handle, &status, "ECBG", "d"))
> > +             return -EIO;
> > +
> > +     if (status < 0)
> > +             return status;
> > +
> > +     return status;
> > +}
> > +
> > +static int ec_set_brightness(int level)
> > +{
> > +
> > +     int ret = 0;
> > +
> > +     if (!hotkey_handle)
> > +             return -ENXIO;
> > +
> > +     if (!acpi_evalf(hotkey_handle, NULL, "ECBS", "vd", level))
> > +             ret = -EIO;
> > +
> > +     return ret;
> > +}
> > +
> > +static int ec_backlight_level(u8 level)
> > +{
> > +     int status = 0;
> > +
> > +     if (!hotkey_handle)
> > +             return -ENXIO;
> > +
> > +     if (!acpi_evalf(hotkey_handle, &status, "ECLL", "d"))
> > +             return -EIO;
> > +
> > +     if ((status < 0) || (level > status))
> > +             return status;
> > +
> > +     if (!acpi_evalf(hotkey_handle, &status, "ECSL", "d"))
> > +             return -EIO;
> > +
> > +     if ((status < 0) || (level < status))
> > +             return status;
> > +
> > +     return level;
> > +}
> > +
> > +static int loongson_laptop_backlight_update(struct backlight_device *bd)
> > +{
> > +     int lvl = ec_backlight_level(bd->props.brightness);
> > +
> > +     if (lvl < 0)
> > +             return -EIO;
> > +     if (ec_set_brightness(lvl))
> > +             return -EIO;
> > +
> > +     return 0;
> > +}
> > +
> > +static int loongson_laptop_get_brightness(struct backlight_device *bd)
> > +{
> > +     u8 level;
> > +
> > +     level = ec_get_brightness();
> > +     if (level < 0)
> > +             return -EIO;
> > +
> > +     return level;
> > +}
> > +
> > +static const struct backlight_ops backlight_laptop_ops = {
> > +     .update_status = loongson_laptop_backlight_update,
> > +     .get_brightness = loongson_laptop_get_brightness,
> > +};
> > +
> > +static int laptop_backlight_register(void)
> > +{
> > +     int status = 0;
> > +     struct backlight_properties props;
> > +
> > +     memset(&props, 0, sizeof(props));
> > +
> > +     if (!acpi_evalf(hotkey_handle, &status, "ECLL", "d"))
> > +             return -EIO;
> > +
> > +     props.brightness = 1;
> > +     props.max_brightness = status;
> > +     props.type = BACKLIGHT_PLATFORM;
> > +
> > +     backlight_device_register("loongson_laptop",
> > +                             NULL, NULL, &backlight_laptop_ops, &props);
> > +
> > +     return 0;
> > +}
> > +
> > +int loongson_laptop_turn_on_backlight(void)
> > +{
> > +     int status;
> > +     union acpi_object arg0 = { ACPI_TYPE_INTEGER };
> > +     struct acpi_object_list args = { 1, &arg0 };
> > +
> > +     arg0.integer.value = 1;
> > +     status = acpi_evaluate_object(NULL, "\\BLSW", &args, NULL);
> > +     if (ACPI_FAILURE(status)) {
> > +             pr_info("Loongson lvds error: 0x%x\n", status);
> > +             return -ENODEV;
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> > +int loongson_laptop_turn_off_backlight(void)
> > +{
> > +     int status;
> > +     union acpi_object arg0 = { ACPI_TYPE_INTEGER };
> > +     struct acpi_object_list args = { 1, &arg0 };
> > +
> > +     arg0.integer.value = 0;
> > +     status = acpi_evaluate_object(NULL, "\\BLSW", &args, NULL);
> > +     if (ACPI_FAILURE(status)) {
> > +             pr_info("Loongson lvds error: 0x%x\n", status);
> > +             return -ENODEV;
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> > +static int __init event_init(struct generic_sub_driver *sub_driver)
> > +{
> > +     int ret;
> > +
> > +     ret = hotkey_map();
> > +     if (ret < 0) {
> > +             pr_err("Failed to parse keymap from DSDT\n");
> > +             return ret;
> > +     }
> > +
> > +     ret = sparse_keymap_setup(generic_inputdev, hotkey_keycode_map, NULL);
> > +     if (ret < 0) {
> > +             pr_err("Failed to setup input device keymap\n");
> > +             input_free_device(generic_inputdev);
> > +
> > +             return ret;
> > +     }
> > +
> > +     /*
> > +      * This hotkey driver handle backlight event when
> > +      * acpi_video_get_backlight_type() gets acpi_backlight_vendor
> > +      */
> > +     if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
> > +             hotkey_backlight_set(false);
> > +     else
> > +             hotkey_backlight_set(true);
> > +
> > +     pr_info("ACPI: enabling firmware HKEY event interface...\n");
> > +
> > +     return ret;
> > +}
> > +
> > +static void event_notify(struct generic_sub_driver *sub_driver, u32 event)
> > +{
> > +     int type, scan_code;
> > +     struct key_entry *ke = NULL;
> > +
> > +     scan_code = event & GENERIC_EVENT_CODE_MASK;
> > +     type = (event & GENERIC_EVENT_TYPE_MASK) >> GENERIC_EVENT_TYPE_OFF;
> > +     ke = sparse_keymap_entry_from_scancode(generic_inputdev, scan_code);
> > +     if (ke) {
> > +             if (type == KE_SW) {
> > +                     int status = 0;
> > +
> > +                     if (hotkey_status_get(&status) < 0)
> > +                             return;
> > +
> > +                     ke->sw.value = !!(status & (1 << ke->sw.code));
> > +             }
> > +             sparse_keymap_report_entry(generic_inputdev, ke, 1, true);
> > +     }
> > +}
> > +
> > +/* 3. Infrastructure */
> > +
> > +static void generic_subdriver_exit(struct generic_sub_driver *sub_driver);
> > +
> > +static int __init generic_subdriver_init(struct generic_sub_driver *sub_driver)
> > +{
> > +     int ret;
> > +
> > +     BUG_ON(!sub_driver);
> > +
> > +     if (!sub_driver || !sub_driver->driver)
> > +             return -EINVAL;
> > +
> > +     ret = platform_driver_register(sub_driver->driver);
> > +     if (ret)
> > +             return -EINVAL;
> > +
> > +     if (sub_driver->init)
> > +             sub_driver->init(sub_driver);
> > +
> > +     if (sub_driver->notify) {
> > +             ret = setup_acpi_notify(sub_driver);
> > +             if (ret == -ENODEV) {
> > +                     ret = 0;
> > +                     goto err_out;
> > +             }
> > +             if (ret < 0)
> > +                     goto err_out;
> > +     }
> > +
> > +     return 0;
> > +
> > +err_out:
> > +     generic_subdriver_exit(sub_driver);
> > +     return (ret < 0) ? ret : 0;
> > +}
> > +
> > +static void generic_subdriver_exit(struct generic_sub_driver *sub_driver)
> > +{
> > +
> > +     if (sub_driver->acpi_notify_installed) {
> > +             acpi_remove_notify_handler(*sub_driver->handle,
> > +                                        sub_driver->type, dispatch_acpi_notify);
> > +             sub_driver->acpi_notify_installed = 0;
> > +     }
> > +}
> > +
> > +static struct generic_sub_driver generic_sub_drivers[] __refdata = {
> > +     {
> > +             .name = "hotkey",
> > +             .init = event_init,
> > +             .notify = event_notify,
> > +             .handle = &hotkey_handle,
> > +             .type = ACPI_DEVICE_NOTIFY,
> > +             .driver = &loongson_hotkey_driver,
> > +     },
> > +};
> > +
> > +static int __init generic_acpi_laptop_init(void)
> > +{
> > +     bool ec_found;
> > +     int i, ret, status;
> > +
> > +     if (acpi_disabled)
> > +             return -ENODEV;
> > +
> > +     /* The EC device is required */
> > +     ec_found = acpi_dev_found(LOONGSON_ACPI_EC_HID);
> > +     if (!ec_found)
> > +             return -ENODEV;
> > +
> > +     /* Enable SCI for EC */
> > +     acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
> > +
> > +     generic_inputdev = input_allocate_device();
> > +     if (!generic_inputdev) {
> > +             pr_err("Unable to allocate input device\n");
> > +             return -ENOMEM;
> > +     }
> > +
> > +     /* Prepare input device, but don't register */
> > +     generic_inputdev->name =
> > +             "Loongson Generic Laptop/All-in-one Extra Buttons";
> > +     generic_inputdev->phys = ACPI_LAPTOP_DRVR_NAME "/input0";
> > +     generic_inputdev->id.bustype = BUS_HOST;
> > +     generic_inputdev->dev.parent = NULL;
> > +
> > +     /* Init subdrivers */
> > +     for (i = 0; i < ARRAY_SIZE(generic_sub_drivers); i++) {
> > +             ret = generic_subdriver_init(&generic_sub_drivers[i]);
> > +             if (ret < 0) {
> > +                     input_free_device(generic_inputdev);
> > +                     return ret;
> > +             }
> > +     }
> > +
> > +     ret = input_register_device(generic_inputdev);
> > +     if (ret < 0) {
> > +             input_free_device(generic_inputdev);
> > +             pr_err("Unable to register input device\n");
> > +             return ret;
> > +     }
> > +
> > +     input_device_registered = 1;
> > +
> > +     if (acpi_evalf(hotkey_handle, &status, "ECBG", "d")) {
> > +             pr_info("Loongson Laptop used, init brightness is 0x%x\n", status);
> > +             ret = laptop_backlight_register();
> > +             if (ret < 0)
> > +                     pr_err("Loongson Laptop: laptop-backlight device register failed\n");
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> > +static void __exit generic_acpi_laptop_exit(void)
> > +{
> > +     if (generic_inputdev) {
> > +             if (input_device_registered)
> > +                     input_unregister_device(generic_inputdev);
> > +             else
> > +                     input_free_device(generic_inputdev);
> > +     }
> > +}
> > +
> > +module_init(generic_acpi_laptop_init);
> > +module_exit(generic_acpi_laptop_exit);
> > +
> > +MODULE_ALIAS("platform:acpi-laptop");
> > +MODULE_AUTHOR("Jianmin Lv <lvjianmin@loongson.cn>");
> > +MODULE_AUTHOR("Huacai Chen <chenhuacai@loongson.cn>");
> > +MODULE_DESCRIPTION(ACPI_LAPTOP_DESC);
> > +MODULE_VERSION(ACPI_LAPTOP_VERSION);
> > +MODULE_LICENSE("GPL");
>
Hans de Goede Sept. 17, 2022, 9:02 p.m. UTC | #3
Hi,

On 9/17/22 17:39, Huacai Chen wrote:
> Hi, Hans,
> 
> On Sat, Sep 17, 2022 at 6:00 PM Hans de Goede <hdegoede@redhat.com> wrote:

<snip>

>>> +     /* Prepare input device, but don't register */
>>> +     generic_inputdev->name =
>>> +             "Loongson Generic Laptop/All-in-one Extra Buttons";
>>> +     generic_inputdev->phys = ACPI_LAPTOP_DRVR_NAME "/input0";
>>> +     generic_inputdev->id.bustype = BUS_HOST;
>>> +     generic_inputdev->dev.parent = NULL;
>>> +
>>> +     /* Init subdrivers */
>>> +     for (i = 0; i < ARRAY_SIZE(generic_sub_drivers); i++) {
>>> +             ret = generic_subdriver_init(&generic_sub_drivers[i]);
>>> +             if (ret < 0) {
>>> +                     input_free_device(generic_inputdev);
>>> +                     return ret;
>>> +             }
>>> +     }
>>
>> I see above that you have only 1 subdriver. Do you expect there to be
>> more in the future ?  If not then it would be better to just completely
>> remove the subdriver abstraction and simply do everything directly
>> from the main probe/remove functions (see below).
> At this time we only add the most basic subdriver, and more subdrivers
> will be added, so I want to keep it here.

Ok, that is fine.

Regards,

Hans
kernel test robot Sept. 18, 2022, 7:38 a.m. UTC | #4
Hi Huacai,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on soc/for-next]
[also build test ERROR on linus/master v6.0-rc5]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Huacai-Chen/LoongArch-Add-ACPI-based-generic-laptop-driver/20220917-145525
base:   https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git for-next
config: loongarch-defconfig (https://download.01.org/0day-ci/archive/20220918/202209181507.gIRt7LRP-lkp@intel.com/config)
compiler: loongarch64-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/3ebe2785d58311650d0f98635c9817e0c2c12f91
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Huacai-Chen/LoongArch-Add-ACPI-based-generic-laptop-driver/20220917-145525
        git checkout 3ebe2785d58311650d0f98635c9817e0c2c12f91
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=loongarch SHELL=/bin/bash

If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   loongarch64-linux-ld: drivers/platform/loongarch/generic-laptop.o: in function `.L133':
>> generic-laptop.c:(.init.text+0x40c): undefined reference to `acpi_video_get_backlight_type'
diff mbox series

Patch

diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig
index b437847b6237..9c68e2def2cb 100644
--- a/drivers/platform/Kconfig
+++ b/drivers/platform/Kconfig
@@ -2,6 +2,9 @@ 
 if MIPS
 source "drivers/platform/mips/Kconfig"
 endif
+if LOONGARCH
+source "drivers/platform/loongarch/Kconfig"
+endif
 
 source "drivers/platform/goldfish/Kconfig"
 
diff --git a/drivers/platform/Makefile b/drivers/platform/Makefile
index 4de08ef4ec9d..41640172975a 100644
--- a/drivers/platform/Makefile
+++ b/drivers/platform/Makefile
@@ -4,6 +4,7 @@ 
 #
 
 obj-$(CONFIG_X86)		+= x86/
+obj-$(CONFIG_LOONGARCH)		+= loongarch/
 obj-$(CONFIG_MELLANOX_PLATFORM)	+= mellanox/
 obj-$(CONFIG_MIPS)		+= mips/
 obj-$(CONFIG_OLPC_EC)		+= olpc/
diff --git a/drivers/platform/loongarch/Kconfig b/drivers/platform/loongarch/Kconfig
new file mode 100644
index 000000000000..c2b15f0628b4
--- /dev/null
+++ b/drivers/platform/loongarch/Kconfig
@@ -0,0 +1,30 @@ 
+#
+# LoongArch Platform Specific Drivers
+#
+
+menuconfig LOONGARCH_PLATFORM_DEVICES
+	bool "LoongArch Platform Specific Device Drivers"
+	default LOONGARCH
+	help
+	  Say Y here to get to see options for device drivers of various
+	  LoongArch platforms, including vendor-specific laptop/desktop
+	  extension and hardware monitor drivers. This option itself does
+	  not add any kernel code.
+
+	  If you say N, all options in this submenu will be skipped and disabled.
+
+if LOONGARCH_PLATFORM_DEVICES
+
+config GENERIC_LAPTOP
+	tristate "Generic Loongson-3 Laptop Driver"
+	depends on ACPI
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on INPUT
+	depends on MACH_LOONGSON64
+	select INPUT_EVDEV
+	select INPUT_SPARSEKMAP
+	default y
+	help
+	  ACPI-based Loongson-3 family laptops generic driver.
+
+endif # LOONGARCH_PLATFORM_DEVICES
diff --git a/drivers/platform/loongarch/Makefile b/drivers/platform/loongarch/Makefile
new file mode 100644
index 000000000000..3fc44f06125a
--- /dev/null
+++ b/drivers/platform/loongarch/Makefile
@@ -0,0 +1 @@ 
+obj-$(CONFIG_GENERIC_LAPTOP) += generic-laptop.o
diff --git a/drivers/platform/loongarch/generic-laptop.c b/drivers/platform/loongarch/generic-laptop.c
new file mode 100644
index 000000000000..4198c0542711
--- /dev/null
+++ b/drivers/platform/loongarch/generic-laptop.c
@@ -0,0 +1,627 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Generic Loongson processor based LAPTOP/ALL-IN-ONE driver
+ *
+ *  Jianmin Lv <lvjianmin@loongson.cn>
+ *  Huacai Chen <chenhuacai@loongson.cn>
+ *
+ * Copyright (C) 2022 Loongson Technology Corporation Limited
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/backlight.h>
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/input/sparse-keymap.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <acpi/video.h>
+
+/* 1. Driver-wide structs and misc. variables */
+
+/* ACPI HIDs */
+#define LOONGSON_ACPI_EC_HID	"PNP0C09"
+#define LOONGSON_ACPI_HKEY_HID	"LOON0000"
+
+#define ACPI_LAPTOP_VERSION "1.0"
+#define ACPI_LAPTOP_NAME "loongson-laptop"
+#define ACPI_LAPTOP_DESC "Loongson Laptop/all-in-one ACPI Driver"
+#define ACPI_LAPTOP_FILE ACPI_LAPTOP_NAME "_acpi"
+#define ACPI_LAPTOP_DRVR_NAME ACPI_LAPTOP_FILE
+#define ACPI_LAPTOP_ACPI_EVENT_PREFIX "loongson"
+
+#define MAX_ACPI_ARGS			3
+#define GENERIC_HOTKEY_MAP_MAX		64
+
+#define GENERIC_EVENT_TYPE_OFF		12
+#define GENERIC_EVENT_TYPE_MASK		0xF000
+#define GENERIC_EVENT_CODE_MASK		0x0FFF
+
+struct generic_sub_driver {
+	u32 type;
+	char *name;
+	acpi_handle *handle;
+	struct acpi_device *device;
+	struct platform_driver *driver;
+	int (*init)(struct generic_sub_driver *sub_driver);
+	void (*notify)(struct generic_sub_driver *sub_driver, u32 event);
+	u8 acpi_notify_installed;
+};
+
+static u32 input_device_registered;
+static struct input_dev *generic_inputdev;
+
+static acpi_handle hotkey_handle;
+static struct key_entry hotkey_keycode_map[GENERIC_HOTKEY_MAP_MAX];
+
+static int loongson_laptop_backlight_update(struct backlight_device *bd);
+
+/* 2. ACPI Helpers and device model */
+
+static int acpi_evalf(acpi_handle handle, int *res, char *method, char *fmt, ...)
+{
+	char res_type;
+	char *fmt0 = fmt;
+	va_list ap;
+	int success, quiet;
+	acpi_status status;
+	struct acpi_object_list params;
+	struct acpi_buffer result, *resultp;
+	union acpi_object in_objs[MAX_ACPI_ARGS], out_obj;
+
+	if (!*fmt) {
+		pr_err("acpi_evalf() called with empty format\n");
+		return 0;
+	}
+
+	if (*fmt == 'q') {
+		quiet = 1;
+		fmt++;
+	} else
+		quiet = 0;
+
+	res_type = *(fmt++);
+
+	params.count = 0;
+	params.pointer = &in_objs[0];
+
+	va_start(ap, fmt);
+	while (*fmt) {
+		char c = *(fmt++);
+		switch (c) {
+		case 'd':	/* int */
+			in_objs[params.count].integer.value = va_arg(ap, int);
+			in_objs[params.count++].type = ACPI_TYPE_INTEGER;
+			break;
+			/* add more types as needed */
+		default:
+			pr_err("acpi_evalf() called with invalid format character '%c'\n", c);
+			va_end(ap);
+			return 0;
+		}
+	}
+	va_end(ap);
+
+	if (res_type != 'v') {
+		result.length = sizeof(out_obj);
+		result.pointer = &out_obj;
+		resultp = &result;
+	} else
+		resultp = NULL;
+
+	status = acpi_evaluate_object(handle, method, &params, resultp);
+
+	switch (res_type) {
+	case 'd':		/* int */
+		success = (status == AE_OK && out_obj.type == ACPI_TYPE_INTEGER);
+		if (success && res)
+			*res = out_obj.integer.value;
+		break;
+	case 'v':		/* void */
+		success = status == AE_OK;
+		break;
+		/* add more types as needed */
+	default:
+		pr_err("acpi_evalf() called with invalid format character '%c'\n", res_type);
+		return 0;
+	}
+
+	if (!success && !quiet)
+		pr_err("acpi_evalf(%s, %s, ...) failed: %s\n",
+		       method, fmt0, acpi_format_exception(status));
+
+	return success;
+}
+
+static int hotkey_status_get(int *status)
+{
+	if (!acpi_evalf(hotkey_handle, status, "GSWS", "d"))
+		return -EIO;
+
+	return 0;
+}
+
+static void dispatch_acpi_notify(acpi_handle handle, u32 event, void *data)
+{
+	struct generic_sub_driver *sub_driver = data;
+
+	if (!sub_driver || !sub_driver->notify)
+		return;
+	sub_driver->notify(sub_driver, event);
+}
+
+static int __init setup_acpi_notify(struct generic_sub_driver *sub_driver)
+{
+	acpi_status status;
+
+	if (!*sub_driver->handle)
+		return 0;
+
+	sub_driver->device = acpi_fetch_acpi_dev(*sub_driver->handle);
+	if (!sub_driver->device) {
+		pr_err("acpi_fetch_acpi_dev(%s) failed\n", sub_driver->name);
+		return -ENODEV;
+	}
+
+	sub_driver->device->driver_data = sub_driver;
+	sprintf(acpi_device_class(sub_driver->device), "%s/%s",
+		ACPI_LAPTOP_ACPI_EVENT_PREFIX, sub_driver->name);
+
+	status = acpi_install_notify_handler(*sub_driver->handle,
+			sub_driver->type, dispatch_acpi_notify, sub_driver);
+	if (ACPI_FAILURE(status)) {
+		if (status == AE_ALREADY_EXISTS) {
+			pr_notice("Another device driver is already "
+				  "handling %s events\n", sub_driver->name);
+		} else {
+			pr_err("acpi_install_notify_handler(%s) failed: %s\n",
+			       sub_driver->name, acpi_format_exception(status));
+		}
+		return -ENODEV;
+	}
+	sub_driver->acpi_notify_installed = 1;
+
+	return 0;
+}
+
+static int loongson_hotkey_suspend(struct device *dev)
+{
+	return 0;
+}
+
+static int loongson_hotkey_resume(struct device *dev)
+{
+	int status = 0;
+	struct key_entry ke;
+	struct backlight_device *bd;
+
+	/*
+	 * Only if the firmware supports SW_LID event model, we can handle the
+	 * event. This is for the consideration of development board without EC.
+	 */
+	if (test_bit(SW_LID, generic_inputdev->swbit)) {
+		if (hotkey_status_get(&status) < 0)
+			return -EIO;
+		/*
+		 * The input device sw element records the last lid status.
+		 * When the system is awakened by other wake-up sources,
+		 * the lid event will also be reported. The judgment of
+		 * adding SW_LID bit which in sw element can avoid this
+		 * case.
+		 *
+		 * Input system will drop lid event when current lid event
+		 * value and last lid status in the same. So laptop driver
+		 * doesn't report repeated events.
+		 *
+		 * Lid status is generally 0, but hardware exception is
+		 * considered. So add lid status confirmation.
+		 */
+		if (test_bit(SW_LID, generic_inputdev->sw) && !(status & (1 << SW_LID))) {
+			ke.type = KE_SW;
+			ke.sw.value = (u8)status;
+			ke.sw.code = SW_LID;
+			sparse_keymap_report_entry(generic_inputdev, &ke, 1, true);
+		}
+	}
+
+	bd = backlight_device_get_by_type(BACKLIGHT_PLATFORM);
+	if (bd) {
+		loongson_laptop_backlight_update(bd) ?
+		pr_warn("Loongson_backlight: resume brightness failed") :
+		pr_info("Loongson_backlight: resume brightness %d\n", bd->props.brightness);
+	}
+
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(loongson_hotkey_pm,
+		loongson_hotkey_suspend, loongson_hotkey_resume);
+
+static int loongson_hotkey_probe(struct platform_device *pdev)
+{
+	hotkey_handle = ACPI_HANDLE(&pdev->dev);
+
+	if (!hotkey_handle)
+		return -ENODEV;
+
+	return 0;
+}
+
+static const struct acpi_device_id loongson_htk_device_ids[] = {
+	{LOONGSON_ACPI_HKEY_HID, 0},
+	{"", 0},
+};
+
+static struct platform_driver loongson_hotkey_driver = {
+	.probe		= loongson_hotkey_probe,
+	.driver		= {
+		.name	= "loongson-hotkey",
+		.owner	= THIS_MODULE,
+		.pm	= pm_ptr(&loongson_hotkey_pm),
+		.acpi_match_table = ACPI_PTR(loongson_htk_device_ids),
+	},
+};
+
+static int hotkey_map(void)
+{
+	u32 index;
+	acpi_status status;
+	struct acpi_buffer buf;
+	union acpi_object *pack;
+
+	buf.length = ACPI_ALLOCATE_BUFFER;
+	status = acpi_evaluate_object_typed(hotkey_handle, "KMAP", NULL, &buf, ACPI_TYPE_PACKAGE);
+	if (status != AE_OK) {
+		pr_err("ACPI exception: %s\n", acpi_format_exception(status));
+		return -1;
+	}
+	pack = buf.pointer;
+	for (index = 0; index < pack->package.count; index++) {
+		union acpi_object *element, *sub_pack;
+
+		sub_pack = &pack->package.elements[index];
+
+		element = &sub_pack->package.elements[0];
+		hotkey_keycode_map[index].type = element->integer.value;
+		element = &sub_pack->package.elements[1];
+		hotkey_keycode_map[index].code = element->integer.value;
+		element = &sub_pack->package.elements[2];
+		hotkey_keycode_map[index].keycode = element->integer.value;
+	}
+
+	return 0;
+}
+
+static int hotkey_backlight_set(bool enable)
+{
+	if (!acpi_evalf(hotkey_handle, NULL, "VCBL", "vd", enable ? 1 : 0))
+		return -EIO;
+
+	return 0;
+}
+
+static int ec_get_brightness(void)
+{
+	int status = 0;
+
+	if (!hotkey_handle)
+		return -ENXIO;
+
+	if (!acpi_evalf(hotkey_handle, &status, "ECBG", "d"))
+		return -EIO;
+
+	if (status < 0)
+		return status;
+
+	return status;
+}
+
+static int ec_set_brightness(int level)
+{
+
+	int ret = 0;
+
+	if (!hotkey_handle)
+		return -ENXIO;
+
+	if (!acpi_evalf(hotkey_handle, NULL, "ECBS", "vd", level))
+		ret = -EIO;
+
+	return ret;
+}
+
+static int ec_backlight_level(u8 level)
+{
+	int status = 0;
+
+	if (!hotkey_handle)
+		return -ENXIO;
+
+	if (!acpi_evalf(hotkey_handle, &status, "ECLL", "d"))
+		return -EIO;
+
+	if ((status < 0) || (level > status))
+		return status;
+
+	if (!acpi_evalf(hotkey_handle, &status, "ECSL", "d"))
+		return -EIO;
+
+	if ((status < 0) || (level < status))
+		return status;
+
+	return level;
+}
+
+static int loongson_laptop_backlight_update(struct backlight_device *bd)
+{
+	int lvl = ec_backlight_level(bd->props.brightness);
+
+	if (lvl < 0)
+		return -EIO;
+	if (ec_set_brightness(lvl))
+		return -EIO;
+
+	return 0;
+}
+
+static int loongson_laptop_get_brightness(struct backlight_device *bd)
+{
+	u8 level;
+
+	level = ec_get_brightness();
+	if (level < 0)
+		return -EIO;
+
+	return level;
+}
+
+static const struct backlight_ops backlight_laptop_ops = {
+	.update_status = loongson_laptop_backlight_update,
+	.get_brightness = loongson_laptop_get_brightness,
+};
+
+static int laptop_backlight_register(void)
+{
+	int status = 0;
+	struct backlight_properties props;
+
+	memset(&props, 0, sizeof(props));
+
+	if (!acpi_evalf(hotkey_handle, &status, "ECLL", "d"))
+		return -EIO;
+
+	props.brightness = 1;
+	props.max_brightness = status;
+	props.type = BACKLIGHT_PLATFORM;
+
+	backlight_device_register("loongson_laptop",
+				NULL, NULL, &backlight_laptop_ops, &props);
+
+	return 0;
+}
+
+int loongson_laptop_turn_on_backlight(void)
+{
+	int status;
+	union acpi_object arg0 = { ACPI_TYPE_INTEGER };
+	struct acpi_object_list args = { 1, &arg0 };
+
+	arg0.integer.value = 1;
+	status = acpi_evaluate_object(NULL, "\\BLSW", &args, NULL);
+	if (ACPI_FAILURE(status)) {
+		pr_info("Loongson lvds error: 0x%x\n", status);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+int loongson_laptop_turn_off_backlight(void)
+{
+	int status;
+	union acpi_object arg0 = { ACPI_TYPE_INTEGER };
+	struct acpi_object_list args = { 1, &arg0 };
+
+	arg0.integer.value = 0;
+	status = acpi_evaluate_object(NULL, "\\BLSW", &args, NULL);
+	if (ACPI_FAILURE(status)) {
+		pr_info("Loongson lvds error: 0x%x\n", status);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int __init event_init(struct generic_sub_driver *sub_driver)
+{
+	int ret;
+
+	ret = hotkey_map();
+	if (ret < 0) {
+		pr_err("Failed to parse keymap from DSDT\n");
+		return ret;
+	}
+
+	ret = sparse_keymap_setup(generic_inputdev, hotkey_keycode_map, NULL);
+	if (ret < 0) {
+		pr_err("Failed to setup input device keymap\n");
+		input_free_device(generic_inputdev);
+
+		return ret;
+	}
+
+	/*
+	 * This hotkey driver handle backlight event when
+	 * acpi_video_get_backlight_type() gets acpi_backlight_vendor
+	 */
+	if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
+		hotkey_backlight_set(false);
+	else
+		hotkey_backlight_set(true);
+
+	pr_info("ACPI: enabling firmware HKEY event interface...\n");
+
+	return ret;
+}
+
+static void event_notify(struct generic_sub_driver *sub_driver, u32 event)
+{
+	int type, scan_code;
+	struct key_entry *ke = NULL;
+
+	scan_code = event & GENERIC_EVENT_CODE_MASK;
+	type = (event & GENERIC_EVENT_TYPE_MASK) >> GENERIC_EVENT_TYPE_OFF;
+	ke = sparse_keymap_entry_from_scancode(generic_inputdev, scan_code);
+	if (ke) {
+		if (type == KE_SW) {
+			int status = 0;
+
+			if (hotkey_status_get(&status) < 0)
+				return;
+
+			ke->sw.value = !!(status & (1 << ke->sw.code));
+		}
+		sparse_keymap_report_entry(generic_inputdev, ke, 1, true);
+	}
+}
+
+/* 3. Infrastructure */
+
+static void generic_subdriver_exit(struct generic_sub_driver *sub_driver);
+
+static int __init generic_subdriver_init(struct generic_sub_driver *sub_driver)
+{
+	int ret;
+
+	BUG_ON(!sub_driver);
+
+	if (!sub_driver || !sub_driver->driver)
+		return -EINVAL;
+
+	ret = platform_driver_register(sub_driver->driver);
+	if (ret)
+		return -EINVAL;
+
+	if (sub_driver->init)
+		sub_driver->init(sub_driver);
+
+	if (sub_driver->notify) {
+		ret = setup_acpi_notify(sub_driver);
+		if (ret == -ENODEV) {
+			ret = 0;
+			goto err_out;
+		}
+		if (ret < 0)
+			goto err_out;
+	}
+
+	return 0;
+
+err_out:
+	generic_subdriver_exit(sub_driver);
+	return (ret < 0) ? ret : 0;
+}
+
+static void generic_subdriver_exit(struct generic_sub_driver *sub_driver)
+{
+
+	if (sub_driver->acpi_notify_installed) {
+		acpi_remove_notify_handler(*sub_driver->handle,
+					   sub_driver->type, dispatch_acpi_notify);
+		sub_driver->acpi_notify_installed = 0;
+	}
+}
+
+static struct generic_sub_driver generic_sub_drivers[] __refdata = {
+	{
+		.name = "hotkey",
+		.init = event_init,
+		.notify = event_notify,
+		.handle = &hotkey_handle,
+		.type = ACPI_DEVICE_NOTIFY,
+		.driver = &loongson_hotkey_driver,
+	},
+};
+
+static int __init generic_acpi_laptop_init(void)
+{
+	bool ec_found;
+	int i, ret, status;
+
+	if (acpi_disabled)
+		return -ENODEV;
+
+	/* The EC device is required */
+	ec_found = acpi_dev_found(LOONGSON_ACPI_EC_HID);
+	if (!ec_found)
+		return -ENODEV;
+
+	/* Enable SCI for EC */
+	acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
+
+	generic_inputdev = input_allocate_device();
+	if (!generic_inputdev) {
+		pr_err("Unable to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	/* Prepare input device, but don't register */
+	generic_inputdev->name =
+		"Loongson Generic Laptop/All-in-one Extra Buttons";
+	generic_inputdev->phys = ACPI_LAPTOP_DRVR_NAME "/input0";
+	generic_inputdev->id.bustype = BUS_HOST;
+	generic_inputdev->dev.parent = NULL;
+
+	/* Init subdrivers */
+	for (i = 0; i < ARRAY_SIZE(generic_sub_drivers); i++) {
+		ret = generic_subdriver_init(&generic_sub_drivers[i]);
+		if (ret < 0) {
+			input_free_device(generic_inputdev);
+			return ret;
+		}
+	}
+
+	ret = input_register_device(generic_inputdev);
+	if (ret < 0) {
+		input_free_device(generic_inputdev);
+		pr_err("Unable to register input device\n");
+		return ret;
+	}
+
+	input_device_registered = 1;
+
+	if (acpi_evalf(hotkey_handle, &status, "ECBG", "d")) {
+		pr_info("Loongson Laptop used, init brightness is 0x%x\n", status);
+		ret = laptop_backlight_register();
+		if (ret < 0)
+			pr_err("Loongson Laptop: laptop-backlight device register failed\n");
+	}
+
+	return 0;
+}
+
+static void __exit generic_acpi_laptop_exit(void)
+{
+	if (generic_inputdev) {
+		if (input_device_registered)
+			input_unregister_device(generic_inputdev);
+		else
+			input_free_device(generic_inputdev);
+	}
+}
+
+module_init(generic_acpi_laptop_init);
+module_exit(generic_acpi_laptop_exit);
+
+MODULE_ALIAS("platform:acpi-laptop");
+MODULE_AUTHOR("Jianmin Lv <lvjianmin@loongson.cn>");
+MODULE_AUTHOR("Huacai Chen <chenhuacai@loongson.cn>");
+MODULE_DESCRIPTION(ACPI_LAPTOP_DESC);
+MODULE_VERSION(ACPI_LAPTOP_VERSION);
+MODULE_LICENSE("GPL");