| Message ID | 1454316643-3931-1-git-send-email-linus.walleij@linaro.org |
|---|---|
| State | Accepted |
| Commit | 4a9b8e4df51df8f21c2dacf54bcefa258beb5e8b |
| Headers | show |
On Tue, Feb 2, 2016 at 5:28 PM, Thierry Reding <thierry.reding@gmail.com> wrote: > On Mon, Feb 01, 2016 at 09:50:43AM +0100, Linus Walleij wrote: >> +This binding builds on the DPI bindings, adding a few properties >> +as a superset of a DPI. See panel-dpi.txt for the required DPI >> +bindings. > > It is unfortunate that we have these two types of bindings, one used by > some of the legacy fbdev drivers and the other by DRM/KMS drivers. There > isn't really much we can do about it, though, as far as I can see. I wasn't aware that they were any different. Where is the equivalent binding for DRM/KMS panels? I guess one must have been merged first and the second one screwed up by not reusing the first one :( > This panel is used with an fbdev driver, right? Yes. I don't know if I will be able to convert the AMBA CLCD driver from fbdev to DRM/KMS but I was hoping I would not have to change the DT to redescribe the same hardware for that, but now it sounds like that is a consequence... Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt new file mode 100644 index 000000000000..acbc6bef3593 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt @@ -0,0 +1,47 @@ +TPO TPG110 Panel +================ + +This binding builds on the DPI bindings, adding a few properties +as a superset of a DPI. See panel-dpi.txt for the required DPI +bindings. + +Required properties: +- compatible : "tpo,tpg110" +- grestb-gpio : panel reset GPIO +- scen-gpios : serial control enable GPIO +- scl-gpios : serial control clock line GPIO +- sda-gpios : serial control data line GPIO + +Required nodes: +- Video port for DPI input, see panel-dpi.txt +- Panel timing for DPI setup, see panel-dpi.txt + +Example +------- + +panel { + compatible = "tpo,tpg110", "panel-dpi"; + grestb-gpios = <&stmpe_gpio44 5 GPIO_ACTIVE_LOW>; + scen-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + scl-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + backlight = <&bl>; + + port { + nomadik_clcd_panel: endpoint { + remote-endpoint = <&nomadik_clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <33200000>; + hactive = <800>; + hback-porch = <216>; + hfront-porch = <40>; + hsync-len = <1>; + vactive = <480>; + vback-porch = <35>; + vfront-porch = <10>; + vsync-len = <1>; + }; +};
This adds device tree bindings for the TPO TPG110 panel found mounted in the Nomadik NHK8815. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- .../bindings/display/panel/tpo,tpg110.txt | 47 ++++++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt -- 2.4.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html