diff mbox

[3/5] ARM: pb1176: add ISP1761 USB OTG host controller

Message ID 1454317068-4790-1-git-send-email-linus.walleij@linaro.org
State New
Headers show

Commit Message

Linus Walleij Feb. 1, 2016, 8:57 a.m. UTC 
The USB host controller was missing from the device tree so add
it. This device is not inside either the development chip or the
FPGA but mounted on the board, so it ends up in the root node of
the device tree.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
 arch/arm/boot/dts/arm-realview-pb1176.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

-- 
2.4.3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff mbox

Patch

diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index 3d2938c73c4e..70a1ec3bedb9 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -106,6 +106,14 @@ 
 		clock-frequency = <0>;
 	};
 
+	usb@3b000000 {
+		compatible = "nxp,usb-isp1761";
+		reg = <0x3b000000 0x20000>;
+		interrupt-parent = <&intc_fpga1176>;
+		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+		port1-otg;
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;