diff mbox series

[v3,2/7] dt-bindings: net: Add Broadcom BCM4377 family PCIe Bluetooth

Message ID 20220919164834.62739-3-sven@svenpeter.dev
State Superseded
Headers show
Series Broadcom/Apple Bluetooth driver for Apple Silicon | expand

Commit Message

Sven Peter Sept. 19, 2022, 4:48 p.m. UTC 
These chips are combined Wi-Fi/Bluetooth radios which expose a
PCI subfunction for the Bluetooth part.
They are found in Apple machines such as the x86 models with the T2
chip or the arm64 models with the M1 or M2 chips.

Signed-off-by: Sven Peter <sven@svenpeter.dev>
---
changes from v2:
  - extended example to include parent pcie node to make
    node name validation work
  - moved to bluetooth/ subdirectory
  - added maxItems to reg and dropped description
  - moved bluetooth-controller.yaml reference after description

changes from v1:
  - added apple,* pattern to brcm,board-type
  - s/PCI/PCIe/
  - fixed 1st reg cell inside the example to not contain the bus number

 .../net/bluetooth/brcm,bcm4377-bluetooth.yaml | 81 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 2 files changed, 82 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml

Comments

Rob Herring Sept. 25, 2022, 3:44 p.m. UTC | #1 
On Mon, Sep 19, 2022 at 11:49 AM Sven Peter <sven@svenpeter.dev> wrote:
>
> These chips are combined Wi-Fi/Bluetooth radios which expose a
> PCI subfunction for the Bluetooth part.
> They are found in Apple machines such as the x86 models with the T2
> chip or the arm64 models with the M1 or M2 chips.
>
> Signed-off-by: Sven Peter <sven@svenpeter.dev>
> ---
> changes from v2:
>   - extended example to include parent pcie node to make
>     node name validation work
>   - moved to bluetooth/ subdirectory
>   - added maxItems to reg and dropped description
>   - moved bluetooth-controller.yaml reference after description
>
> changes from v1:
>   - added apple,* pattern to brcm,board-type
>   - s/PCI/PCIe/
>   - fixed 1st reg cell inside the example to not contain the bus number
>
>  .../net/bluetooth/brcm,bcm4377-bluetooth.yaml | 81 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  2 files changed, 82 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml
new file mode 100644
index 000000000000..37cb39a3a62e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml
@@ -0,0 +1,81 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/brcm,bcm4377-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4377 family PCIe Bluetooth Chips
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+description:
+  This binding describes Broadcom BCM4377 family PCIe-attached bluetooth chips
+  usually found in Apple machines. The Wi-Fi part of the chip is described in
+  bindings/net/wireless/brcm,bcm4329-fmac.yaml.
+
+allOf:
+  - $ref: bluetooth-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - pci14e4,5fa0 # BCM4377
+      - pci14e4,5f69 # BCM4378
+      - pci14e4,5f71 # BCM4387
+
+  reg:
+    maxItems: 1
+
+  brcm,board-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Board type of the Bluetooth chip. This is used to decouple
+      the overall system board from the Bluetooth module and used to construct
+      firmware and calibration data filenames.
+      On Apple platforms, this should be the Apple module-instance codename
+      prefixed by "apple,", e.g. "apple,atlantisb".
+    pattern: '^apple,.*'
+
+  brcm,taurus-cal-blob:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: A per-device calibration blob for the Bluetooth radio. This
+      should be filled in by the bootloader from platform configuration
+      data, if necessary, and will be uploaded to the device.
+      This blob is used if the chip stepping of the Bluetooth module does not
+      support beamforming.
+
+  brcm,taurus-bf-cal-blob:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: A per-device calibration blob for the Bluetooth radio. This
+      should be filled in by the bootloader from platform configuration
+      data, if necessary, and will be uploaded to the device.
+      This blob is used if the chip stepping of the Bluetooth module supports
+      beamforming.
+
+  local-bd-address: true
+
+required:
+  - compatible
+  - reg
+  - local-bd-address
+  - brcm,board-type
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie@a0000000 {
+      #address-cells = <3>;
+      #size-cells = <2>;
+      reg = <0xa0000000 0x1000000>;
+      device_type = "pci";
+      ranges = <0x43000000 0x6 0xa0000000 0xa0000000 0x0 0x20000000>;
+
+      bluetooth@0,1 {
+        compatible = "pci14e4,5f69";
+        reg = <0x100 0x0 0x0 0x0 0x0>;
+        brcm,board-type = "apple,honshu";
+        /* To be filled by the bootloader */
+        local-bd-address = [00 00 00 00 00 00];
+      };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 9ae989b32ebb..74463bc5e1cb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1875,6 +1875,7 @@  F:	Documentation/devicetree/bindings/interrupt-controller/apple,*
 F:	Documentation/devicetree/bindings/iommu/apple,dart.yaml
 F:	Documentation/devicetree/bindings/iommu/apple,sart.yaml
 F:	Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml
+F:	Documentation/devicetree/bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml
 F:	Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml
 F:	Documentation/devicetree/bindings/nvmem/apple,efuses.yaml
 F:	Documentation/devicetree/bindings/pci/apple,pcie.yaml