diff mbox series

[v3,04/34] ARM: dts: qcom: sdx55: align TLMM pin configuration with DT schema

Message ID 20220927173702.5200-5-krzysztof.kozlowski@linaro.org
State Superseded
Headers show
Series pinctrl/arm64: qcom: continued - fix Qualcomm TLMM pinctrl schema warnings | expand

Commit Message

Krzysztof Kozlowski Sept. 27, 2022, 5:36 p.m. UTC
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.  Schema
also requires 'function' property, so two nodes for the same gpio (mux
and config) should be merged into one.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 .../boot/dts/qcom-sdx55-telit-fn980-tlb.dts   | 45 +++++++------------
 1 file changed, 15 insertions(+), 30 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
index a4fa468a095f..ac8b4626ae9a 100644
--- a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
@@ -282,40 +282,25 @@  &remoteproc_mpss {
 };
 
 &tlmm {
-	pcie_ep_clkreq_default: pcie_ep_clkreq_default {
-		mux {
-			pins = "gpio56";
-			function = "pcie_clkreq";
-		};
-		config {
-			pins = "gpio56";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	pcie_ep_clkreq_default: pcie-ep-clkreq-default-state {
+		pins = "gpio56";
+		function = "pcie_clkreq";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	pcie_ep_perst_default: pcie_ep_perst_default {
-		mux {
-			pins = "gpio57";
-			function = "gpio";
-		};
-		config {
-			pins = "gpio57";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+	pcie_ep_perst_default: pcie-ep-perst-default-state {
+		pins = "gpio57";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 
-	pcie_ep_wake_default: pcie_ep_wake_default {
-		mux {
-			pins = "gpio53";
-			function = "gpio";
-		};
-		config {
-			pins = "gpio53";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	pcie_ep_wake_default: pcie-ep-wake-default-state {
+		pins = "gpio53";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 };