Message ID | 20220927104138.5924-1-marex@denx.de |
---|---|
State | New |
Headers | show |
Series | [v2] dt-bindings: mmc: arm,pl18x: Document interrupt-names property | expand |
On 9/27/22 14:18, Linus Walleij wrote: > On Tue, Sep 27, 2022 at 12:41 PM Marek Vasut <marex@denx.de> wrote: > >> --- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml >> +++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml >> @@ -99,6 +99,9 @@ properties: >> minItems: 1 >> maxItems: 2 >> >> + interrupt-names: >> + const: cmd_irq > > This hardware come in variants with one or two IRQs. > > Either two: "cmd_irq", "data_irq" > > Or one combined IRQ (logic OR between those two!) > I don't know what that should be called, perhaps > "cmd_data_irq". > > Since all DTS:es then have to be patched an alternative > is as Arnd says to just delete the names. We should however > at the very least patch the bindings description: for the IRQs > to make the above situation clear. Done, bindings updated and stm32/qcom DTs cleaned up.
diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml index 1e69a5a42439b..5f7eae8d57ab9 100644 --- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml +++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml @@ -99,6 +99,9 @@ properties: minItems: 1 maxItems: 2 + interrupt-names: + const: cmd_irq + st,sig-dir-dat0: $ref: /schemas/types.yaml#/definitions/flag description: ST Micro-specific property, bus signal direction pins used for