diff mbox series

[v4,4/4] mmc: sdhci-tegra: Use actual clock rate for SW tuning correction

Message ID 20220927100946.19482-4-pshete@nvidia.com
State Superseded
Headers show
Series [v4,1/4] mmc: sdhci-tegra: Separate Tegra194 and Tegra234 SoC data | expand

Commit Message

Prathamesh Shete Sept. 27, 2022, 10:09 a.m. UTC 
Ensure tegra_host member "curr_clk_rate" holds the actual clock rate
instead of requested clock rate for proper use during tuning correction
algorithm. Actual clk rate may not be the same as the requested clk
frequency depending on the parent clock source set. Tuning correction
algorithm depends on certain parameters which are sensitive to current
clk rate. If the host clk is selected instead of the actual clock rate,
tuning correction algorithm may end up applying invalid correction,
which could result in errors

Fixes: ea8fc5953e8b ("mmc: tegra: update hw tuning process")

Signed-off-by: Aniruddha TVS Rao <anrao@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
---
 drivers/mmc/host/sdhci-tegra.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 61dc5ee0726d..8285b979391d 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -784,7 +784,7 @@  static void tegra_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 		dev_err(dev, "failed to set clk rate to %luHz: %d\n",
 			host_clk, err);
 
-	tegra_host->curr_clk_rate = host_clk;
+	tegra_host->curr_clk_rate = clk_get_rate(pltfm_host->clk);
 	if (tegra_host->ddr_signaling)
 		host->max_clk = host_clk;
 	else