diff mbox series

[v7,14/29] thermal/drivers/armada: Use generic thermal_zone_get_trip() function

Message ID 20220928210059.891387-15-daniel.lezcano@linaro.org
State Superseded
Headers show
Series Rework the trip points creation | expand

Commit Message

Daniel Lezcano Sept. 28, 2022, 9 p.m. UTC
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/armada_thermal.c | 39 ++++++++++++++++----------------
 1 file changed, 20 insertions(+), 19 deletions(-)
diff mbox series

Patch

diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
index 52d63b3997fe..9444e5a22ca0 100644
--- a/drivers/thermal/armada_thermal.c
+++ b/drivers/thermal/armada_thermal.c
@@ -785,33 +785,34 @@  static int armada_configure_overheat_int(struct armada_thermal_priv *priv,
 					 int sensor_id)
 {
 	/* Retrieve the critical trip point to enable the overheat interrupt */
-	const struct thermal_trip *trips = of_thermal_get_trip_points(tz);
+	struct thermal_trip trip;
 	int ret;
 	int i;
 
-	if (!trips)
-		return -EINVAL;
-
-	for (i = 0; i < of_thermal_get_ntrips(tz); i++)
-		if (trips[i].type == THERMAL_TRIP_CRITICAL)
-			break;
+	for (i = 0; i < thermal_zone_get_num_trips(tz); i++) {
 
-	if (i == of_thermal_get_ntrips(tz))
-		return -EINVAL;
+		ret = thermal_zone_get_trip(tz, i, &trip);
+		if (ret)
+			return ret;
+		
+		if (trip.type != THERMAL_TRIP_CRITICAL) 
+			continue;
 
-	ret = armada_select_channel(priv, sensor_id);
-	if (ret)
-		return ret;
+		ret = armada_select_channel(priv, sensor_id);
+		if (ret)
+			return ret;
+		
+		armada_set_overheat_thresholds(priv, trip.temperature,
+					       trip.hysteresis);
+		priv->overheat_sensor = tz;
+		priv->interrupt_source = sensor_id;
 
-	armada_set_overheat_thresholds(priv,
-				       trips[i].temperature,
-				       trips[i].hysteresis);
-	priv->overheat_sensor = tz;
-	priv->interrupt_source = sensor_id;
+		armada_enable_overheat_interrupt(priv);
 
-	armada_enable_overheat_interrupt(priv);
+		return 0;
+	}
 
-	return 0;
+	return -EINVAL;
 }
 
 static int armada_thermal_probe(struct platform_device *pdev)