diff mbox series

[v2,11/12] phy: qcom-qmp-combo: rework regs layout arrays

Message ID 20220930112926.638543-12-dmitry.baryshkov@linaro.org
State Superseded
Headers show
Series phy: qcom-qmp: rework register layout tables | expand

Commit Message

Dmitry Baryshkov Sept. 30, 2022, 11:29 a.m. UTC 
Use symbolic names for the values inside reg layout arrays. New register
names are added following the PCS register layout that is used by the
particular PHY.

Note: ipq8074 tables appear to use a mixture of v2 and v3 registers.
This might need additional fixes.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 24 +++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index cf675a00e391..0561df216fb1 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -114,23 +114,23 @@  enum qphy_reg_layout {
 };
 
 static const unsigned int qmp_v3_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
-	[QPHY_SW_RESET]			= 0x00,
-	[QPHY_START_CTRL]		= 0x08,
-	[QPHY_PCS_STATUS]		= 0x174,
-	[QPHY_PCS_POWER_DOWN_CONTROL]	= 0x04,
-	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0x0d8,
-	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR]  = 0x0dc,
+	[QPHY_SW_RESET]			= QPHY_V3_PCS_SW_RESET,
+	[QPHY_START_CTRL]		= QPHY_V3_PCS_START_CONTROL,
+	[QPHY_PCS_STATUS]		= QPHY_V3_PCS_PCS_STATUS,
+	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V3_PCS_POWER_DOWN_CONTROL,
+	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= QPHY_V3_PCS_AUTONOMOUS_MODE_CTRL,
+	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V3_PCS_LFPS_RXTERM_IRQ_CLEAR,
 };
 
 static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
-	[QPHY_SW_RESET]			= 0x00,
-	[QPHY_START_CTRL]		= 0x44,
-	[QPHY_PCS_STATUS]		= 0x14,
-	[QPHY_PCS_POWER_DOWN_CONTROL]	= 0x40,
+	[QPHY_SW_RESET]			= QPHY_V4_PCS_SW_RESET,
+	[QPHY_START_CTRL]		= QPHY_V4_PCS_START_CONTROL,
+	[QPHY_PCS_STATUS]		= QPHY_V4_PCS_PCS_STATUS1,
+	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V4_PCS_POWER_DOWN_CONTROL,
 
 	/* In PCS_USB */
-	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0x008,
-	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x014,
+	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_CTRL,
+	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V4_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
 };
 
 static const struct qmp_phy_init_tbl qmp_v3_usb3_serdes_tbl[] = {