diff mbox series

[2/3] dt-bindings: gpio: Conver Unisoc EIC controller binding to yaml

Message ID 20220928092937.27120-2-zhang.lyra@gmail.com
State New
Headers show
Series [1/3] dt-bindings: gpio: Conver Unisoc GPIO controller binding to yaml | expand

Commit Message

Chunyan Zhang Sept. 28, 2022, 9:29 a.m. UTC
From: Chunyan Zhang <chunyan.zhang@unisoc.com>

Convert the Unisoc EIC controller binding to DT schema format.

Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
---
 .../bindings/gpio/gpio-eic-sprd.txt           |  97 ------------
 .../bindings/gpio/sprd,gpio-eic.yaml          | 145 ++++++++++++++++++
 2 files changed, 145 insertions(+), 97 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-eic-sprd.txt
 create mode 100644 Documentation/devicetree/bindings/gpio/sprd,gpio-eic.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/gpio/gpio-eic-sprd.txt b/Documentation/devicetree/bindings/gpio/gpio-eic-sprd.txt
deleted file mode 100644
index 54040a2bfe3a..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-eic-sprd.txt
+++ /dev/null
@@ -1,97 +0,0 @@ 
-Spreadtrum EIC controller bindings
-
-The EIC is the abbreviation of external interrupt controller, which can
-be used only in input mode. The Spreadtrum platform has 2 EIC controllers,
-one is in digital chip, and another one is in PMIC. The digital chip EIC
-controller contains 4 sub-modules: EIC-debounce, EIC-latch, EIC-async and
-EIC-sync. But the PMIC EIC controller contains only one EIC-debounce sub-
-module.
-
-The EIC-debounce sub-module provides up to 8 source input signal
-connections. A debounce mechanism is used to capture the input signals'
-stable status (millisecond resolution) and a single-trigger mechanism
-is introduced into this sub-module to enhance the input event detection
-reliability. In addition, this sub-module's clock can be shut off
-automatically to reduce power dissipation. Moreover the debounce range
-is from 1ms to 4s with a step size of 1ms. The input signal will be
-ignored if it is asserted for less than 1 ms.
-
-The EIC-latch sub-module is used to latch some special power down signals
-and generate interrupts, since the EIC-latch does not depend on the APB
-clock to capture signals.
-
-The EIC-async sub-module uses a 32kHz clock to capture the short signals
-(microsecond resolution) to generate interrupts by level or edge trigger.
-
-The EIC-sync is similar with GPIO's input function, which is a synchronized
-signal input register. It can generate interrupts by level or edge trigger
-when detecting input signals.
-
-Required properties:
-- compatible: Should be one of the following:
-  "sprd,sc9860-eic-debounce",
-  "sprd,sc9860-eic-latch",
-  "sprd,sc9860-eic-async",
-  "sprd,sc9860-eic-sync",
-  "sprd,sc2731-eic".
-- reg: Define the base and range of the I/O address space containing
-  the GPIO controller registers.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells: Should be <2>. The first cell is the gpio number and
-  the second cell is used to specify optional parameters.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be <2>. Specifies the number of cells needed
-  to encode interrupt source.
-- interrupts: Should be the port interrupt shared by all the gpios.
-
-Example:
-	eic_debounce: gpio@40210000 {
-		compatible = "sprd,sc9860-eic-debounce";
-		reg = <0 0x40210000 0 0x80>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	eic_latch: gpio@40210080 {
-		compatible = "sprd,sc9860-eic-latch";
-		reg = <0 0x40210080 0 0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	eic_async: gpio@402100a0 {
-		compatible = "sprd,sc9860-eic-async";
-		reg = <0 0x402100a0 0 0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	eic_sync: gpio@402100c0 {
-		compatible = "sprd,sc9860-eic-sync";
-		reg = <0 0x402100c0 0 0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	pmic_eic: gpio@300 {
-		compatible = "sprd,sc2731-eic";
-		reg = <0x300>;
-		interrupt-parent = <&sc2731_pmic>;
-		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/sprd,gpio-eic.yaml b/Documentation/devicetree/bindings/gpio/sprd,gpio-eic.yaml
new file mode 100644
index 000000000000..e25ee1884c07
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/sprd,gpio-eic.yaml
@@ -0,0 +1,145 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/sprd,gpio-eic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc EIC controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+description:
+  The EIC is the abbreviation of external interrupt controller, which can
+  be used only in input mode. The Spreadtrum platform has 2 EIC controllers,
+  one is in digital chip, and another one is in PMIC. The digital chip EIC
+  controller contains 4 sub-modules, i.e. EIC-debounce, EIC-latch, EIC-async and
+  EIC-sync. But the PMIC EIC controller contains only one EIC-debounce sub-
+  module.
+
+  The EIC-debounce sub-module provides up to 8 source input signal
+  connections. A debounce mechanism is used to capture the input signals'
+  stable status (millisecond resolution) and a single-trigger mechanism
+  is introduced into this sub-module to enhance the input event detection
+  reliability. In addition, this sub-module's clock can be shut off
+  automatically to reduce power dissipation. Moreover the debounce range
+  is from 1ms to 4s with a step size of 1ms. The input signal will be
+  ignored if it is asserted for less than 1 ms.
+
+  The EIC-latch sub-module is used to latch some special power down signals
+  and generate interrupts, since the EIC-latch does not depend on the APB
+  clock to capture signals.
+
+  The EIC-async sub-module uses a 32kHz clock to capture the short signals
+  (microsecond resolution) to generate interrupts by level or edge trigger.
+
+  The EIC-sync is similar with GPIO's input function, which is a synchronized
+  signal input register. It can generate interrupts by level or edge trigger
+  when detecting input signals.
+
+properties:
+  compatible:
+    enum:
+      - sprd,sc9860-eic-debounce
+      - sprd,sc9860-eic-latch
+      - sprd,sc9860-eic-async
+      - sprd,sc9860-eic-sync
+      - sprd,sc2731-eic
+
+  reg:
+    minItems: 1
+    maxItems: 4
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+    description: The interrupt shared by all GPIO lines for this controller.
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        eic_debounce: gpio@40210000 {
+            compatible = "sprd,sc9860-eic-debounce";
+            reg = <0 0x40210000 0 0x80>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        eic_latch: gpio@40210080 {
+            compatible = "sprd,sc9860-eic-latch";
+            reg = <0 0x40210080 0 0x20>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        eic_async: gpio@402100a0 {
+            compatible = "sprd,sc9860-eic-async";
+            reg = <0 0x402100a0 0 0x20>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        eic_sync: gpio@402100c0 {
+            compatible = "sprd,sc9860-eic-sync";
+            reg = <0 0x402100c0 0 0x20>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+
+    sc2730_pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic_eic: gpio@300 {
+            compatible = "sprd,sc2731-eic";
+            reg = <0x300>;
+            interrupt-parent = <&sc2731_pmic>;
+            interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };
+...