new file mode 100644
@@ -0,0 +1,40 @@
+What: /sys/devices/platform/.../wiegand-gpio-attributes/format
+Date: October 2022
+Contact: Martin Zaťovič <m.zatovic1@gmail.com>
+Description: Sets a format of Wiegand communication. Currently supported
+ formats are 26, 36 and 37 bits. These formats automatically add
+ checksums to the first and last bits of a message. To set a custom
+ format, 0 needs to be written here. Custom format writes an amount of
+ bits defined by payload_len(see below) and it does not add checksums so
+ the user is responsible for that.
+Users: any user space application which wants to communicate using Wiegand
+
+What: /sys/devices/platform/.../wiegand-gpio-attributes/payload_len
+Date: October 2022
+Contact: Martin Zaťovič <sampaio.ime@gmail.com>
+Description: Depends on format attribute - using one of the standard formats
+ the payload_len attribute file becomes read-only and it contains the
+ number of bits of a message without the checksum bits(e.g. 24 for
+ 26-bit format). Using a custom format makes this file writable for
+ configuring the Wiegand message length in bits.
+Users: any user space application which wants to communicate using Wiegand
+
+What: /sys/devices/platform/.../wiegand-gpio-attributes/pulse_len
+Date: October 2022
+Contact: Martin Zaťovič
+Description: Length of the low pulse in usecs; defaults to 50us.
+Users: any user space application which wants to communicate using Wiegand
+
+What: /sys/devices/platform/.../wiegand-gpio-attributes/interval_len
+Date: October 2022
+Contact: Martin Zaťovič
+Description: Length of the whole bit(both the pulse and the high phase) in
+ usecs; defaults to 2000us
+Users: any user space application which wants to communicate using Wiegand
+
+What: /sys/devices/platform/.../wiegand-gpio-attributes/frame_gap
+Date: October 2022
+Contact: Martin Zaťovič
+Description: Length of the last bit of a frame(both the pulse and the high
+ phase) in usecs; defaults to interval_len
+Users: any user space application which wants to communicate using Wiegand
@@ -21960,6 +21960,15 @@ L: linux-input@vger.kernel.org
S: Maintained
F: drivers/hid/hid-wiimote*
+WIEGAND DRIVER
+M: Martin Zaťovič <m.zatovic1@gmail.com>
+S: Maintained
+F: Documentation/devicetree/bindings/bus/wiegand.yaml
+F: Documentation/devicetree/bindings/gpio/gpio-wiegand.yaml
+F: drivers/bus/wiegand.c
+F: drivers/gpio/gpio-wiegand.c
+F: include/linux/wiegand.h
+
WILOCITY WIL6210 WIRELESS DRIVER
L: linux-wireless@vger.kernel.org
S: Orphan
@@ -703,6 +703,13 @@ config GPIO_VX855
Additional drivers must be enabled in order to use the
functionality of the device.
+config GPIO_WIEGAND
+ tristate "Wiegand GPIO support"
+ depends on WIEGAND
+ help
+ This enables the GPIO module for Wiegand protocol communication.
+ The Wiegand bus driver has to be enabled first.
+
config GPIO_WCD934X
tristate "Qualcomm Technologies Inc WCD9340/WCD9341 GPIO controller driver"
depends on MFD_WCD934X && OF_GPIO
@@ -173,6 +173,7 @@ obj-$(CONFIG_GPIO_VISCONTI) += gpio-visconti.o
obj-$(CONFIG_GPIO_VX855) += gpio-vx855.o
obj-$(CONFIG_GPIO_WCD934X) += gpio-wcd934x.o
obj-$(CONFIG_GPIO_WHISKEY_COVE) += gpio-wcove.o
+obj-$(CONFIG_GPIO_WIEGAND) += gpio-wiegand.o
obj-$(CONFIG_GPIO_WINBOND) += gpio-winbond.o
obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x.o
obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o
new file mode 100644
@@ -0,0 +1,492 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/poll.h>
+#include <linux/miscdevice.h>
+#include <linux/of.h>
+#include <linux/gpio/consumer.h>
+#include <linux/wiegand.h>
+
+struct wiegand_gpio_device *wiegand_gpio_glob;
+
+struct wiegand_gpio_device {
+ struct device *dev;
+ struct miscdevice *misc_dev;
+ struct mutex mutex;
+ struct gpio_desc *gpio_data_hi;
+ struct gpio_desc *gpio_data_lo;
+ struct wiegand_setup setup;
+ u8 data[WIEGAND_MAX_PAYLEN_BYTES];
+};
+
+struct wiegand_gpio_instance {
+ struct wiegand_gpio_device *dev;
+ unsigned long flags;
+};
+
+static const struct wiegand_setup WIEGAND_SETUP = {
+ .pulse_len = 50,
+ .interval_len = 2000,
+ .frame_gap = 2000,
+ .format = WIEGAND_V26,
+ .payload_len = 24,
+};
+
+/*
+ * To send a bit of value 1 following the wiegand protocol, one must set
+ * the wiegand_data_hi to low for the duration of pulse. Similarly to send
+ * a bit of value 0, the wiegand_data_lo is set to low for pulse duration.
+ * This way the two lines are never low ar the same time.
+ */
+void wiegand_gpio_send_bit(struct wiegand_gpio_device *wiegand_gpio,
+ bool value, bool last)
+{
+ struct wiegand_setup *setup = &wiegand_gpio->setup;
+ struct gpio_desc *gpio = value ? wiegand_gpio->gpio_data_hi
+ : wiegand_gpio->gpio_data_lo;
+
+ gpiod_set_value_cansleep(gpio, 0);
+ udelay(setup->pulse_len);
+ gpiod_set_value_cansleep(gpio, 1);
+
+ if (last)
+ udelay(setup->frame_gap - setup->pulse_len);
+ else
+ udelay(setup->interval_len - setup->pulse_len);
+}
+
+/* This function is used for custom format */
+static int wiegand_gpio_write_by_bits(struct wiegand_gpio_device *wiegand_gpio,
+ size_t len)
+{
+ size_t i, bitlen;
+ bool bit_value, is_last_bit;
+ struct wiegand_setup *setup = &wiegand_gpio->setup;
+
+ bitlen = setup->format ? setup->payload_len + 2 : setup->payload_len;
+
+ for (i = 0; i < bitlen; i++) {
+ bit_value = ((wiegand_gpio->data[i / 8] >> (7 - (i % 8)))
+ & 0x01);
+ is_last_bit = (i + 1) == bitlen;
+
+ wiegand_gpio_send_bit(wiegand_gpio, (bool)bit_value,
+ is_last_bit);
+ }
+
+ return 0;
+}
+
+static unsigned int wiegand_gpio_calc_bytes(unsigned int bits)
+{
+ if (bits % 8 != 0)
+ return (bits / 8) + 1;
+ else
+ return bits / 8;
+}
+
+static unsigned int wiegand_gpio_get_payload_size(
+ unsigned long payload_len_bits,
+ enum wiegand_format fmt)
+{
+ unsigned int ret;
+
+ if (fmt == WIEGAND_CUSTOM)
+ ret = wiegand_gpio_calc_bytes(payload_len_bits);
+ else
+ /* add 2 for parity bits */
+ ret = wiegand_gpio_calc_bytes(payload_len_bits + 2);
+
+ return ret;
+}
+
+static ssize_t wiegand_gpio_get_user_data(
+ struct wiegand_gpio_device *wiegand_gpio,
+ char __user const *buf, size_t len)
+{
+ size_t rc;
+ size_t num_copy;
+ unsigned char tmp[WIEGAND_MAX_PAYLEN_BYTES];
+ struct wiegand_setup *setup = &wiegand_gpio->setup;
+
+ num_copy = wiegand_gpio_get_payload_size(setup->payload_len,
+ setup->format);
+
+ if (setup->format == WIEGAND_CUSTOM) {
+ rc = copy_from_user(&wiegand_gpio->data[0], buf, num_copy);
+ if (rc < 0)
+ return rc;
+ } else {
+ rc = copy_from_user(tmp, buf, num_copy);
+ if (rc < 0)
+ return rc;
+ wiegand_gpio_add_parity_to_data(tmp, wiegand_gpio->data,
+ setup->format);
+ }
+ return num_copy;
+}
+
+static int wiegand_gpio_release(struct inode *ino, struct file *filp)
+{
+ struct wiegand_gpio_instance *info = filp->private_data;
+ struct wiegand_gpio_device *wiegand_gpio = info->dev;
+
+ mutex_lock(&wiegand_gpio->mutex);
+ mutex_unlock(&wiegand_gpio->mutex);
+
+ kfree(info);
+
+ return 0;
+}
+
+static ssize_t wiegand_gpio_write(struct file *filp,
+ char __user const *buf, size_t len, loff_t *offset)
+{
+ struct wiegand_gpio_instance *info = filp->private_data;
+ struct wiegand_gpio_device *wiegand_gpio = info->dev;
+ int rc;
+
+ if (len * 8 < wiegand_gpio->setup.payload_len)
+ return -EBADMSG;
+ if (buf == NULL || len == 0)
+ return -EINVAL;
+
+ wiegand_gpio_get_user_data(wiegand_gpio, buf, len);
+ rc = wiegand_gpio_write_by_bits(wiegand_gpio, len);
+
+ return len;
+}
+
+static int wiegand_gpio_open(struct inode *ino, struct file *filp)
+{
+ struct wiegand_gpio_device *wiegand_gpio;
+ struct wiegand_gpio_instance *info;
+ int rc;
+
+ wiegand_gpio = wiegand_gpio_glob;
+
+ mutex_lock(&wiegand_gpio->mutex);
+
+ if ((filp->f_flags & O_ACCMODE) == O_RDONLY ||
+ (filp->f_flags & O_ACCMODE) == O_RDWR) {
+ dev_err(wiegand_gpio->dev, "Device is write only\n");
+ rc = -EIO;
+ goto err;
+ }
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ rc = -ENOMEM;
+ goto err;
+ }
+
+ gpiod_direction_output(wiegand_gpio->gpio_data_hi, 1);
+ gpiod_direction_output(wiegand_gpio->gpio_data_lo, 1);
+
+ info->dev = wiegand_gpio;
+ info->flags = filp->f_flags;
+
+ mutex_unlock(&wiegand_gpio->mutex);
+
+ filp->private_data = info;
+
+ return 0;
+err:
+ mutex_unlock(&wiegand_gpio->mutex);
+
+ return rc;
+}
+
+const struct file_operations wiegand_gpio_fops = {
+ .owner = THIS_MODULE,
+ .open = wiegand_gpio_open,
+ .release = wiegand_gpio_release,
+ .write = wiegand_gpio_write,
+};
+
+static struct miscdevice wiegand_misc_device = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "wiegand-gpio",
+ .fops = &wiegand_gpio_fops,
+};
+
+static ssize_t store_ulong(unsigned long *val, const char *buf,
+ size_t size, unsigned long max)
+{
+ int ret;
+ unsigned long new;
+
+ ret = kstrtoul(buf, 0, &new);
+ if (ret)
+ return ret;
+ if (max != 0 && new > max)
+ return -EINVAL;
+
+ *val = new;
+ return size;
+}
+
+ssize_t pulse_len_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct wiegand_gpio_device *device = dev_get_drvdata(dev);
+
+ if (!device)
+ return -ENODEV;
+
+ return sysfs_emit(buf, "%lu\n", device->setup.pulse_len);
+}
+
+ssize_t pulse_len_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct wiegand_gpio_device *device = dev_get_drvdata(dev);
+
+ if (!device)
+ return -ENODEV;
+
+ return store_ulong(&(device->setup.pulse_len), buf, count, 0);
+}
+
+ssize_t interval_len_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct wiegand_gpio_device *device = dev_get_drvdata(dev);
+
+ if (!device)
+ return -ENODEV;
+
+ return sysfs_emit(buf, "%lu\n", device->setup.pulse_len);
+}
+
+ssize_t interval_len_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct wiegand_gpio_device *device = dev_get_drvdata(dev);
+
+ if (!device)
+ return -ENODEV;
+
+ return store_ulong(&(device->setup.interval_len), buf, count, 0);
+}
+
+ssize_t frame_gap_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct wiegand_gpio_device *device = dev_get_drvdata(dev);
+
+ if (!device)
+ return -ENODEV;
+
+ return sysfs_emit(buf, "%lu\n", device->setup.frame_gap);
+}
+
+ssize_t frame_gap_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct wiegand_gpio_device *device = dev_get_drvdata(dev);
+
+ if (!device)
+ return -ENODEV;
+
+ return store_ulong(&(device->setup.frame_gap), buf, count, 0);
+}
+
+ssize_t format_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct wiegand_gpio_device *device = dev_get_drvdata(dev);
+
+ if (!device)
+ return -ENODEV;
+
+ return sysfs_emit(buf, "%u\n", device->setup.format);
+}
+
+/*
+ * To set a particular format, the number of bits the driver is supposed to
+ * transmit is written to the format sysfs file. For standard formats, the
+ * allowed inputs are 26, 36 and 37. To set a custom format, 0 is passed.
+ */
+ssize_t format_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+ unsigned long new;
+ enum wiegand_format *val;
+ struct wiegand_gpio_device *device = dev_get_drvdata(dev);
+
+ if (!device)
+ return -ENODEV;
+
+ val = &(device->setup.format);
+
+ ret = kstrtoul(buf, 0, &new);
+ if (ret)
+ return ret;
+
+ switch (new) {
+ case 0:
+ *val = WIEGAND_CUSTOM;
+ break;
+ case 26:
+ *val = WIEGAND_V26;
+ device->setup.payload_len = WIEGAND_V26_PAYLEN;
+ break;
+ case 36:
+ *val = WIEGAND_V36;
+ device->setup.payload_len = WIEGAND_V36_PAYLEN;
+ break;
+ case 37:
+ *val = WIEGAND_V37;
+ device->setup.payload_len = WIEGAND_V37_PAYLEN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return count;
+}
+
+/*
+ * Using a custom format, the payload_len sysfs file configures the size of
+ * messages payload in bits. When one of the standard formats is used, this
+ * file is read-only and contains the size of the message in bits without the
+ * parity bits.
+ */
+ssize_t payload_len_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct wiegand_gpio_device *device = dev_get_drvdata(dev);
+
+ if (!device)
+ return -ENODEV;
+
+ return sysfs_emit(buf, "%lu\n", device->setup.pulse_len);
+}
+
+ssize_t payload_len_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct wiegand_gpio_device *device = dev_get_drvdata(dev);
+
+ if (!device)
+ return -ENODEV;
+
+ /* standard formats use fixed payload size */
+ if (device->setup.format != WIEGAND_CUSTOM)
+ return -EPERM;
+
+ return store_ulong(&(device->setup.payload_len), buf, count,
+ WIEGAND_MAX_PAYLEN_BYTES * 8);
+}
+
+DEVICE_ATTR_RW(pulse_len);
+DEVICE_ATTR_RW(interval_len);
+DEVICE_ATTR_RW(frame_gap);
+DEVICE_ATTR_RW(format);
+DEVICE_ATTR_RW(payload_len);
+
+static struct attribute *wiegand_attrs[] = {
+ &dev_attr_pulse_len.attr,
+ &dev_attr_interval_len.attr,
+ &dev_attr_frame_gap.attr,
+ &dev_attr_format.attr,
+ &dev_attr_payload_len.attr,
+ NULL,
+};
+
+static struct attribute_group wiegand_group = {
+ .name = "wiegand-gpio-attributes",
+ .attrs = wiegand_attrs,
+};
+
+static int wiegand_gpio_dev_probe(struct device *device)
+{
+ int rc;
+ struct wiegand_gpio_device *wiegand_gpio;
+
+ wiegand_gpio = devm_kzalloc(device, sizeof(*wiegand_gpio), GFP_KERNEL);
+ if (!wiegand_gpio)
+ return -ENOMEM;
+
+ wiegand_gpio->dev = device;
+ wiegand_gpio->misc_dev = &wiegand_misc_device;
+
+ wiegand_gpio_glob = wiegand_gpio;
+
+ /* Get GPIO lines using device tree bindings. */
+ wiegand_gpio->gpio_data_lo = devm_gpiod_get(wiegand_gpio->dev,
+ "data-lo", GPIOD_OUT_HIGH);
+ if (IS_ERR(wiegand_gpio->gpio_data_lo)) {
+ return dev_err_probe(wiegand_gpio->dev,
+ PTR_ERR(wiegand_gpio->gpio_data_lo),
+ "Can't get data-lo line.");
+ }
+ wiegand_gpio->gpio_data_hi = devm_gpiod_get(wiegand_gpio->dev,
+ "data-hi", GPIOD_OUT_HIGH);
+ if (IS_ERR(wiegand_gpio->gpio_data_hi)) {
+ return dev_err_probe(wiegand_gpio->dev,
+ PTR_ERR(wiegand_gpio->gpio_data_hi),
+ "Can't get data-hi line.");
+ }
+
+ rc = sysfs_create_group(&wiegand_gpio->dev->kobj, &wiegand_group);
+ if (rc < 0) {
+ dev_err(wiegand_gpio->dev, "Couldn't register sysfs group\n");
+ return rc;
+ }
+
+ mutex_init(&wiegand_gpio->mutex);
+
+ misc_register(wiegand_gpio->misc_dev);
+ wiegand_gpio->misc_dev->parent = wiegand_gpio->dev;
+
+ memcpy(&wiegand_gpio->setup, &WIEGAND_SETUP,
+ sizeof(struct wiegand_setup));
+
+ dev_set_drvdata(device, wiegand_gpio);
+
+ return 0;
+}
+
+static int wiegand_gpio_dev_remove(struct device *device)
+{
+ struct wiegand_gpio_device *wiegand_gpio = dev_get_drvdata(device);
+
+ sysfs_remove_group(&wiegand_gpio->dev->kobj, &wiegand_group);
+
+ misc_deregister(&wiegand_misc_device);
+ kfree(wiegand_gpio);
+
+ return 0;
+}
+
+static const struct of_device_id wiegand_gpio_dt_idtable[] = {
+ { .compatible = "wiegand,wiegand-gpio", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, wiegand_gpio_dt_idtable);
+
+static const enum wiegand_module_id wiegand_gpio_module_table[] = {
+ WIEGAND_MODULE_GPIO,
+ 0,
+};
+
+static struct wiegand_driver wiegand_gpio_driver = {
+ .driver = {
+ .name = "wiegand-gpio",
+ .probe = wiegand_gpio_dev_probe,
+ .remove = wiegand_gpio_dev_remove,
+ .of_match_table = wiegand_gpio_dt_idtable,
+ },
+ .id_table = wiegand_gpio_module_table,
+};
+
+module_wiegand_driver(wiegand_gpio_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Wiegand write-only driver realized by GPIOs");
+MODULE_AUTHOR("Martin Zaťovič <m.zatovic1@gmail.com>");
Wiegand GPIO driver uses GPIO lines defined in the devicetree to transmit data following the Wiegand protocol. Signed-off-by: Martin Zaťovič <m.zatovic1@gmail.com> --- .../ABI/testing/sysfs-driver-gpio-wiegand | 40 ++ MAINTAINERS | 9 + drivers/gpio/Kconfig | 7 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-wiegand.c | 492 ++++++++++++++++++ 5 files changed, 549 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-driver-gpio-wiegand create mode 100644 drivers/gpio/gpio-wiegand.c