| Message ID | 20221018211533.21335-7-afd@ti.com |
|---|---|
| State | Accepted |
| Commit | 8709e0442c79c03f7067d6e7464d669504f76527 |
| Headers | show |
| Series | None | expand |
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts index 197d329a6082..318ec805ff54 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts @@ -353,8 +353,7 @@ &sdhci1 { &cpsw3g { pinctrl-names = "default"; - pinctrl-0 = <&main_mdio1_pins_default - &main_rgmii1_pins_default + pinctrl-0 = <&main_rgmii1_pins_default &main_rgmii2_pins_default>; }; @@ -369,6 +368,9 @@ &cpsw_port2 { }; &cpsw3g_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&main_mdio1_pins_default>; + cpsw3g_phy0: ethernet-phy@0 { reg = <0>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
Although usually integrated as a child of an Ethernet controller, MDIO IP has an independent pinout. This pinout should be controlled by the MDIO node (so if it was to be disabled for instance, the pinmux state would reflect that). Move the MDIO pins pinmux to the MIDO nodes. Signed-off-by: Andrew Davis <afd@ti.com> --- arch/arm64/boot/dts/ti/k3-am625-sk.dts | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)