[1/1] dt-bindings: clock: ti,cdce925: Convert to DT schema

diff --git a/Documentation/devicetree/bindings/clock/ti,cdce925.txt b/Documentation/devicetree/bindings/clock/ti,cdce925.txt
deleted file mode 100644
index df42ab72718f..000000000000
--- a/Documentation/devicetree/bindings/clock/ti,cdce925.txt
+++ /dev/null
@@ -1,53 +0,0 @@ 
-Binding for TI CDCE913/925/937/949 programmable I2C clock synthesizers.
-
-Reference
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] https://www.ti.com/product/cdce913
-[3] https://www.ti.com/product/cdce925
-[4] https://www.ti.com/product/cdce937
-[5] https://www.ti.com/product/cdce949
-
-The driver provides clock sources for each output Y1 through Y5.
-
-Required properties:
- - compatible: Shall be one of the following:
-	- "ti,cdce913": 1-PLL, 3 Outputs
-	- "ti,cdce925": 2-PLL, 5 Outputs
-	- "ti,cdce937": 3-PLL, 7 Outputs
-	- "ti,cdce949": 4-PLL, 9 Outputs
- - reg: I2C device address.
- - clocks: Points to a fixed parent clock that provides the input frequency.
- - #clock-cells: From common clock bindings: Shall be 1.
-
-Optional properties:
- - xtal-load-pf: Crystal load-capacitor value to fine-tune performance on a
-                 board, or to compensate for external influences.
-- vdd-supply: A regulator node for Vdd
-- vddout-supply: A regulator node for Vddout
-
-For all PLL1, PLL2, ... an optional child node can be used to specify spread
-spectrum clocking parameters for a board.
-  - spread-spectrum: SSC mode as defined in the data sheet.
-  - spread-spectrum-center: Use "centered" mode instead of "max" mode. When
-    present, the clock runs at the requested frequency on average. Otherwise
-    the requested frequency is the maximum value of the SCC range.
-
-
-Example:
-
-	clockgen: cdce925pw@64 {
-		compatible = "cdce925";
-		reg = <0x64>;
-		clocks = <&xtal_27Mhz>;
-		#clock-cells = <1>;
-		xtal-load-pf = <5>;
-		vdd-supply = <&1v8-reg>;
-		vddout-supply = <&3v3-reg>;
-		/* PLL options to get SSC 1% centered */
-		PLL2 {
-			spread-spectrum = <4>;
-			spread-spectrum-center;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/clock/ti,cdce925.yaml b/Documentation/devicetree/bindings/clock/ti,cdce925.yaml
new file mode 100644
index 000000000000..1e68ee68e458
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,cdce925.yaml
@@ -0,0 +1,104 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,cdce925.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI CDCE913/925/937/949 programmable I2C clock synthesizers node bindings
+
+maintainers:
+  - Mike Looijmans <mike.looijmans@topic.nl>
+
+description: |
+  Flexible Low Power LVCMOS Clock Generator with SSC Support for EMI Reduction
+
+  - CDCE(L)913: 1-PLL, 3 Outputs https://www.ti.com/product/cdce913
+  - CDCE(L)925: 2-PLL, 5 Outputs https://www.ti.com/product/cdce925
+  - CDCE(L)937: 3-PLL, 7 Outputs https://www.ti.com/product/cdce937
+  - CDCE(L)949: 4-PLL, 9 Outputs https://www.ti.com/product/cdce949
+
+properties:
+  $nodename:
+    pattern: "^clock-controller$"
+
+  compatible:
+    enum:
+      - ti,cdce913
+      - ti,cdce925
+      - ti,cdce937
+      - ti,cdce949
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: fixed parent clock
+
+  "#clock-cells":
+    const: 1
+
+  vdd-supply:
+    description: Regulator that provides 1.8V Vdd power supply
+
+  vddout-supply:
+    description: |
+      Regulator that provides Vddout power supply.
+      non-L variant: 2.5V or 3.3V for
+      L variant: 1.8V for
+
+  xtal-load-pf:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Crystal load-capacitor value to fine-tune performance on a
+      board, or to compensate for external influences.
+
+patternProperties:
+  "^PLL[1-4]$":
+    type: object
+    description: |
+      optional child node can be used to specify spread
+      spectrum clocking parameters for a board
+
+    properties:
+      spread-spectrum:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: SSC mode as defined in the data sheet
+
+      spread-spectrum-center:
+        type: boolean
+        description: |
+          Use "centered" mode instead of "max" mode. When
+          present, the clock runs at the requested frequency on average.
+          Otherwise the requested frequency is the maximum value of the
+          SCC range.
+
+required:
+  - compatible
+  - ret
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cdce925: clock-controller@64 {
+            compatible = "ti,cdce925";
+            reg = <0x64>;
+            clocks = <&xtal_27Mhz>;
+            #clock-cells = <1>;
+            xtal-load-pf = <5>;
+            vdd-supply = <&reg_1v8>;
+            vddout-supply = <&reg_3v3>;
+            /* PLL options to get SSC 1% centered */
+            PLL2 {
+                spread-spectrum = <4>;
+                spread-spectrum-center;
+            };
+        };
+    };