diff mbox series

i2c: xiic: Make sure to disable clock on .remove()

Message ID 20221019202808.88779-1-u.kleine-koenig@pengutronix.de
State New
Headers show
Series i2c: xiic: Make sure to disable clock on .remove() | expand

Commit Message

Uwe Kleine-König Oct. 19, 2022, 8:28 p.m. UTC
If for whatever reasons pm_runtime_resume_and_get() failed, .remove() is
exited early, the clock isn't freed and runtime PM state isn't reset.

The right thing to do however is to free all resources that don't need
HW access after a problem with runtime PM. Also issue a warning in that
case and return 0 to suppress a less helpful warning by the driver core.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/i2c/busses/i2c-xiic.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)


base-commit: 9abf2313adc1ca1b6180c508c25f22f9395cc780

Comments

Michal Simek Dec. 1, 2022, 11:42 a.m. UTC | #1
On 10/19/22 22:28, Uwe Kleine-König wrote:
> 
> If for whatever reasons pm_runtime_resume_and_get() failed, .remove() is
> exited early, the clock isn't freed and runtime PM state isn't reset.
> 
> The right thing to do however is to free all resources that don't need
> HW access after a problem with runtime PM. Also issue a warning in that
> case and return 0 to suppress a less helpful warning by the driver core.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---
>   drivers/i2c/busses/i2c-xiic.c | 9 ++++++---
>   1 file changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
> index b3fe6b2aa3ca..809d6eadae2d 100644
> --- a/drivers/i2c/busses/i2c-xiic.c
> +++ b/drivers/i2c/busses/i2c-xiic.c
> @@ -858,11 +858,14 @@ static int xiic_i2c_remove(struct platform_device *pdev)
>          /* remove adapter & data */
>          i2c_del_adapter(&i2c->adap);
> 
> -       ret = pm_runtime_resume_and_get(i2c->dev);
> +       ret = pm_runtime_get_sync(i2c->dev);
> +
>          if (ret < 0)
> -               return ret;
> +               dev_warn(&pdev->dev, "Failed to activate device for removal (%pe)\n",
> +                        ERR_PTR(ret));
> +       else
> +               xiic_deinit(i2c);
> 
> -       xiic_deinit(i2c);
>          pm_runtime_put_sync(i2c->dev);
>          clk_disable_unprepare(i2c->clk);
>          pm_runtime_disable(&pdev->dev);
> 
> base-commit: 9abf2313adc1ca1b6180c508c25f22f9395cc780
> --
> 2.37.2
> 

Acked-by: Michal Simek <michal.simek@amd.com>

Thanks,
Michal
Wolfram Sang Dec. 7, 2022, 8:05 p.m. UTC | #2
On Wed, Oct 19, 2022 at 10:28:08PM +0200, Uwe Kleine-König wrote:
> If for whatever reasons pm_runtime_resume_and_get() failed, .remove() is
> exited early, the clock isn't freed and runtime PM state isn't reset.
> 
> The right thing to do however is to free all resources that don't need
> HW access after a problem with runtime PM. Also issue a warning in that
> case and return 0 to suppress a less helpful warning by the driver core.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Applied to for-next, thanks!
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index b3fe6b2aa3ca..809d6eadae2d 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -858,11 +858,14 @@  static int xiic_i2c_remove(struct platform_device *pdev)
 	/* remove adapter & data */
 	i2c_del_adapter(&i2c->adap);
 
-	ret = pm_runtime_resume_and_get(i2c->dev);
+	ret = pm_runtime_get_sync(i2c->dev);
+
 	if (ret < 0)
-		return ret;
+		dev_warn(&pdev->dev, "Failed to activate device for removal (%pe)\n",
+			 ERR_PTR(ret));
+	else
+		xiic_deinit(i2c);
 
-	xiic_deinit(i2c);
 	pm_runtime_put_sync(i2c->dev);
 	clk_disable_unprepare(i2c->clk);
 	pm_runtime_disable(&pdev->dev);