diff mbox series

[v3,09/15] dt-bindings: phy: qcom,qmp-pcie: rename current bindings

Message ID 20221021110947.28103-10-johan+linaro@kernel.org
State Superseded
Headers show
Series phy: qcom-qmp-pcie: add support for sc8280xp | expand

Commit Message

Johan Hovold Oct. 21, 2022, 11:09 a.m. UTC
The current QMP PCIe PHY bindings are based on the original MSM8996
binding which provided multiple PHYs per IP block and these in turn were
described by child nodes.

Later QMP PCIe PHY blocks only provide a single PHY and the remnant
child node does not really reflect the hardware.

The original MSM8996 binding also ended up describing the individual
register blocks as belonging to either the wrapper node or the PHY child
nodes.

This is an unnecessary level of detail which has lead to problems when
later IP blocks using different register layouts have been forced to fit
the original mould rather than updating the binding. The bindings are
arguable also incomplete as they only the describe register blocks used
by the current Linux drivers (e.g. does not include the per lane PCS
registers).

In preparation for adding new bindings for SC8280XP which further
bindings can be based on, rename the current schema file after IPQ8074,
which was the first SoC added to the bindings after MSM8996 (which has
already been split out), and add a reference to the SC8280XP bindings.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 ...om,qmp-pcie-phy.yaml => qcom,ipq8074-qmp-pcie-phy.yaml} | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
 rename Documentation/devicetree/bindings/phy/{qcom,qmp-pcie-phy.yaml => qcom,ipq8074-qmp-pcie-phy.yaml} (96%)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
similarity index 96%
rename from Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml
rename to Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
index 324ad7d03a38..62045dcfb20c 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
@@ -1,10 +1,10 @@ 
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/phy/qcom,qmp-pcie-phy.yaml#
+$id: http://devicetree.org/schemas/phy/qcom,ipq8074-qmp-pcie-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm QMP PHY controller (PCIe)
+title: Qualcomm QMP PHY controller (PCIe, IPQ8074)
 
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
@@ -13,6 +13,9 @@  description:
   QMP PHY controller supports physical layer functionality for a number of
   controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
 
+  Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see
+  qcom,sc8280xp-qmp-pcie-phy.yaml.
+
 properties:
   compatible:
     enum: