diff mbox series

[3/3] tty: n_gsm: add parameter negotiation support

Message ID 20221021084315.2306-3-daniel.starke@siemens.com
State New
Headers show
Series [1/3] tty: n_gsm: introduce macro for minimal unit size | expand

Commit Message

D. Starke Oct. 21, 2022, 8:43 a.m. UTC
From: Daniel Starke <daniel.starke@siemens.com>

n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.1.8.1.1 describes the parameter negotiation
messages and parameters. Chapter 5.4.1 states that the default parameters
are to be used if no negotiation is performed. Chapter 5.4.6.3.1 describes
the encoding of the parameter negotiation message. The meaning of the
parameters and allowed value ranges can be found in chapter 5.7.

Add parameter negotiation support accordingly. DLCI specific parameter
configuration by the user requires additional ioctls. This is subject to another
patch.

Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
---
 drivers/tty/n_gsm.c | 308 ++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 300 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index b6813a134c18..c6fe00afe1b2 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -123,6 +123,7 @@  struct gsm_msg {
 
 enum gsm_dlci_state {
 	DLCI_CLOSED,
+	DLCI_CONFIGURE,		/* Sending PN (for adaption > 1) */
 	DLCI_OPENING,		/* Sending SABM not seen UA */
 	DLCI_OPEN,		/* SABM/UA complete */
 	DLCI_CLOSING,		/* Sending DISC not seen UA/DM */
@@ -406,6 +407,7 @@  static const u8 gsm_fcs8[256] = {
 #define INIT_FCS	0xFF
 #define GOOD_FCS	0xCF
 
+static void gsm_dlci_close(struct gsm_dlci *dlci);
 static int gsmld_output(struct gsm_mux *gsm, u8 *data, int len);
 static int gsm_modem_update(struct gsm_dlci *dlci, u8 brk);
 static struct gsm_msg *gsm_data_alloc(struct gsm_mux *gsm, u8 addr, int len,
@@ -528,6 +530,55 @@  static void gsm_hex_dump_bytes(const char *fname, const u8 *data,
 	kfree(prefix);
 }
 
+/**
+ * gsm_encode_params	-	encode DLCI parameters
+ * @dlci: DLCI to encode from
+ * @data: 8 byte buffer for encoded data
+ * @dlen: length of buffer
+ *
+ * Encodes the parameters according to GSM 07.10 section 5.4.6.3.1
+ * table 3.
+ */
+static int gsm_encode_params(const struct gsm_dlci *dlci, u8 *data,
+			     unsigned int dlen)
+{
+	struct gsm_mux *gsm = dlci->gsm;
+
+	if (dlen < 8)
+		return -EINVAL;
+
+	data[0] = dlci->addr;
+	data[1] = 0x00; /* UIH, convergence layer type 1 */
+	data[2] = dlci->prio;
+	data[3] = gsm->t1;
+	data[4] = dlci->mtu & 0xFF;
+	data[5] = (dlci->mtu >> 8) & 0xFF;
+	data[6] = gsm->n2;
+	data[7] = dlci->k;
+
+	if (dlci->ftype == UI) {
+		data[1] = 0x01; /* UI */
+	} else if (dlci->ftype != UIH) {
+		pr_err("%s: unsupported frame type %d\n", __func__,
+		       dlci->ftype);
+		return -EINVAL;
+	}
+
+	switch (dlci->adaption) {
+	case 1: /* Unstructured */
+		break;
+	case 2: /* Unstructured with modem bits. */
+		data[1] |= 0x10; /* convergence layer type 2 */
+		break;
+	default:
+		pr_err("%s: unsupported adaption %d\n", __func__,
+		       dlci->adaption);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 /**
  *	gsm_register_devices	-	register all tty devices for a given mux index
  *
@@ -1445,6 +1496,122 @@  static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci,
 	dlci->modem_rx = mlines;
 }
 
+/**
+ * gsm_process_negotiation	-	process received parameters
+ * @gsm: GSM channel
+ * @addr: DLCI address
+ * @cr: command/response
+ * @data: data following command
+ * @clen: length of data
+ *
+ * Used when the response for our parameter negotiation command was
+ * received.
+ */
+static int gsm_process_negotiation(struct gsm_mux *gsm, unsigned int addr,
+				   unsigned int cr, const u8 *data,
+				   unsigned int clen)
+{
+	struct gsm_dlci *dlci = gsm->dlci[addr];
+	unsigned int ftype, i, adaption, prio, n1, k;
+
+	if (clen < 8)
+		return -EINVAL;
+
+	i = data[1] & 0x0F;
+	adaption = ((data[1] >> 4) & 0x0F) + 1;
+	prio = data[2] & 0x3F;
+	/* t1 = data[3]; */
+	n1 = data[4] | (data[5] << 8);
+	/* n2 = data[6]; */
+	k = data[7] & 0x07;
+
+	if (n1 < MIN_UNIT_SIZE) {
+		if (debug & DBG_ERRORS)
+			pr_info("%s N1 out of range in PN\n", __func__);
+		return -EINVAL;
+	}
+
+	switch (i) {
+	case 0x00:
+		ftype = UIH;
+		break;
+	case 0x01:
+		ftype = UI;
+		break;
+	case 0x02: /* I frames are not supported */
+		if (debug & DBG_ERRORS)
+			pr_info("%s unsupported I frame request in PN\n",
+				__func__);
+		return -EINVAL;
+	default:
+		if (debug & DBG_ERRORS)
+			pr_info("%s i out of range in PN\n", __func__);
+		return -EINVAL;
+	}
+
+	if (!cr && gsm->initiator) {
+		if (adaption != dlci->adaption) {
+			if (debug & DBG_ERRORS)
+				pr_info("%s invalid adaption %d in PN\n",
+					__func__, adaption);
+			return -EINVAL;
+		}
+		if (prio != dlci->prio) {
+			if (debug & DBG_ERRORS)
+				pr_info("%s invalid priority %d in PN",
+					__func__, prio);
+			return -EINVAL;
+		}
+		if (n1 > gsm->mru || n1 > dlci->mtu) {
+			/* We requested a frame size but the other party wants
+			 * to send larger frames. The standard allows only a
+			 * smaller response value than requested (5.4.6.3.1).
+			 */
+			if (debug & DBG_ERRORS)
+				pr_info("%s invalid N1 %d in PN\n", __func__,
+					n1);
+			return -EINVAL;
+		}
+		dlci->mtu = n1;
+		if (ftype != dlci->ftype) {
+			if (debug & DBG_ERRORS)
+				pr_info("%s invalid i %d in PN\n", __func__, i);
+			return -EINVAL;
+		}
+		if (ftype != UI && ftype != UIH && k > dlci->k) {
+			if (debug & DBG_ERRORS)
+				pr_info("%s invalid k %d in PN\n", __func__, k);
+			return -EINVAL;
+		}
+		dlci->k = k;
+	} else if (cr && !gsm->initiator) {
+		/* Only convergence layer type 1 and 2 are supported. */
+		if (adaption != 1 && adaption != 2) {
+			if (debug & DBG_ERRORS)
+				pr_info("%s invalid adaption %d in PN\n",
+					__func__, adaption);
+			return -EINVAL;
+		}
+		dlci->adaption = adaption;
+		if (n1 > gsm->mru) {
+			/* Propose a smaller value */
+			dlci->mtu = gsm->mru;
+		} else if (n1 > MAX_MTU) {
+			/* Propose a smaller value */
+			dlci->mtu = MAX_MTU;
+		} else {
+			dlci->mtu = n1;
+		}
+		dlci->prio = prio;
+		dlci->ftype = ftype;
+		dlci->k = k;
+	} else {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 /**
  *	gsm_control_modem	-	modem status received
  *	@gsm: GSM channel
@@ -1498,6 +1665,62 @@  static void gsm_control_modem(struct gsm_mux *gsm, const u8 *data, int clen)
 	gsm_control_reply(gsm, CMD_MSC, data, clen);
 }
 
+/**
+ * gsm_control_negotiation	-	parameter negotiation received
+ * @gsm: GSM channel
+ * @cr: command/response flag
+ * @data: data following command
+ * @dlen: data length
+ *
+ * We have received a parameter negotiation message. This is used by
+ * the GSM mux protocol to configure protocol parameters for a new DLCI.
+ */
+static void gsm_control_negotiation(struct gsm_mux *gsm, unsigned int cr,
+				    const u8 *data, unsigned int dlen)
+{
+	unsigned int addr;
+	u8 params[8];
+	struct gsm_dlci *dlci;
+
+	if (dlen < 8)
+		return;
+
+	/* Invalid DLCI? */
+	addr = data[0] & 0x3F;
+	if (addr == 0 || addr >= NUM_DLCI || !gsm->dlci[addr])
+		return;
+	dlci = gsm->dlci[addr];
+
+	/* Too late for parameter negotiation? */
+	if ((!cr && dlci->state == DLCI_OPENING) || dlci->state == DLCI_OPEN)
+		return;
+
+	/* Process the received parameters */
+	if (gsm_process_negotiation(gsm, addr, cr, data, dlen) != 0) {
+		/* Negotiation failed. Close the link. */
+		if (debug & DBG_ERRORS)
+			pr_info("%s PN failed\n", __func__);
+		gsm_dlci_close(dlci);
+		return;
+	}
+
+	if (cr) {
+		/* Reply command with accepted parameters. */
+		if (gsm_encode_params(dlci, params, sizeof(params)) == 0)
+			gsm_control_reply(gsm, CMD_PN, params, sizeof(params));
+		else if (debug & DBG_ERRORS)
+			pr_info("%s PN invalid\n", __func__);
+	} else if (dlci->state == DLCI_CONFIGURE) {
+		/* Proceed with link setup by sending SABM before UA */
+		dlci->state = DLCI_OPENING;
+		gsm_command(gsm, dlci->addr, SABM|PF);
+		mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
+	} else {
+		if (debug & DBG_ERRORS)
+			pr_info("%s PN in invalid state\n", __func__);
+	}
+}
+
 /**
  *	gsm_control_rls		-	remote line status
  *	@gsm: GSM channel
@@ -1607,8 +1830,12 @@  static void gsm_control_message(struct gsm_mux *gsm, unsigned int command,
 		/* Modem wishes to enter power saving state */
 		gsm_control_reply(gsm, CMD_PSC, NULL, 0);
 		break;
+		/* Optional commands */
+	case CMD_PN:
+		/* Modem sends a parameter negotiation command */
+		gsm_control_negotiation(gsm, 1, data, clen);
+		break;
 		/* Optional unsupported commands */
-	case CMD_PN:	/* Parameter negotiation */
 	case CMD_RPN:	/* Remote port negotiation */
 	case CMD_SNC:	/* Service negotiation command */
 	default:
@@ -1641,8 +1868,8 @@  static void gsm_control_response(struct gsm_mux *gsm, unsigned int command,
 	spin_lock_irqsave(&gsm->control_lock, flags);
 
 	ctrl = gsm->pending_cmd;
-	/* Does the reply match our command */
 	command |= 1;
+	/* Does the reply match our command */
 	if (ctrl != NULL && (command == ctrl->cmd || command == CMD_NSC)) {
 		/* Our command was replied to, kill the retry timer */
 		del_timer(&gsm->t2_timer);
@@ -1652,6 +1879,9 @@  static void gsm_control_response(struct gsm_mux *gsm, unsigned int command,
 			ctrl->error = -EOPNOTSUPP;
 		ctrl->done = 1;
 		wake_up(&gsm->event);
+	/* Or did we receive the PN response to our PN command */
+	} else if (command == CMD_PN) {
+		gsm_control_negotiation(gsm, 0, data, clen);
 	}
 	spin_unlock_irqrestore(&gsm->control_lock, flags);
 }
@@ -1829,6 +2059,31 @@  static void gsm_dlci_open(struct gsm_dlci *dlci)
 	wake_up(&dlci->gsm->event);
 }
 
+/**
+ * gsm_dlci_negotiate	-	start parameter negotiation
+ * @dlci: DLCI to open
+ *
+ * Starts the parameter negotiation for the new DLCI. This needs to be done
+ * before the DLCI initialized the channel via SABM.
+ */
+static int gsm_dlci_negotiate(struct gsm_dlci *dlci)
+{
+	struct gsm_mux *gsm = dlci->gsm;
+	u8 params[8];
+	int ret;
+
+	ret = gsm_encode_params(dlci, params, sizeof(params));
+	if (ret != 0)
+		return ret;
+
+	/* We cannot asynchronous wait for the command response with
+	 * gsm_command() and gsm_control_wait() at this point.
+	 */
+	ret = gsm_control_command(gsm, CMD_PN, params, sizeof(params));
+
+	return ret;
+}
+
 /**
  *	gsm_dlci_t1		-	T1 timer expiry
  *	@t: timer contained in the DLCI that opened
@@ -1850,6 +2105,14 @@  static void gsm_dlci_t1(struct timer_list *t)
 	struct gsm_mux *gsm = dlci->gsm;
 
 	switch (dlci->state) {
+	case DLCI_CONFIGURE:
+		if (dlci->retries && gsm_dlci_negotiate(dlci) == 0) {
+			dlci->retries--;
+			mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
+		} else {
+			gsm_dlci_begin_close(dlci); /* prevent half open link */
+		}
+		break;
 	case DLCI_OPENING:
 		if (dlci->retries) {
 			dlci->retries--;
@@ -1888,17 +2151,46 @@  static void gsm_dlci_t1(struct timer_list *t)
  *	to the modem which should then reply with a UA or ADM, at which point
  *	we will move into open state. Opening is done asynchronously with retry
  *	running off timers and the responses.
+ *	Parameter negotiation is performed before SABM if required.
  */
 
 static void gsm_dlci_begin_open(struct gsm_dlci *dlci)
 {
-	struct gsm_mux *gsm = dlci->gsm;
-	if (dlci->state == DLCI_OPEN || dlci->state == DLCI_OPENING)
+	struct gsm_mux *gsm = dlci ? dlci->gsm : NULL;
+	bool need_pn = false;
+
+	if (!gsm)
 		return;
-	dlci->retries = gsm->n2;
-	dlci->state = DLCI_OPENING;
-	gsm_command(dlci->gsm, dlci->addr, SABM|PF);
-	mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
+
+	if (dlci->addr != 0) {
+		if (gsm->adaption != 1 || gsm->adaption != dlci->adaption)
+			need_pn = true;
+		if (dlci->prio != ((((dlci->addr / 8) + 1) * 8) - 1))
+			need_pn = true;
+		if (gsm->ftype != dlci->ftype)
+			need_pn = true;
+	}
+
+	switch (dlci->state) {
+	case DLCI_CLOSED:
+	case DLCI_CLOSING:
+		dlci->retries = gsm->n2;
+		if (!need_pn) {
+			dlci->state = DLCI_OPENING;
+			gsm_command(gsm, dlci->addr, SABM|PF);
+		} else {
+			/* Configure DLCI before setup */
+			dlci->state = DLCI_CONFIGURE;
+			if (gsm_dlci_negotiate(dlci) != 0) {
+				gsm_dlci_close(dlci);
+				return;
+			}
+		}
+		mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
+		break;
+	default:
+		break;
+	}
 }
 
 /**