diff mbox series

wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request()

Message ID 20221024071329.504277-1-linuxlovemin@yonsei.ac.kr
State New
Headers show
Series wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request() | expand

Commit Message

Minsuk Kang Oct. 24, 2022, 7:13 a.m. UTC 
This patch fixes a shift-out-of-bounds in brcmfmac that occurs in
BIT(chiprev) when a 'chiprev' provided by the device is too large.
It should also not be equal to or greater than BITS_PER_TYPE(u32)
as we do bitwise AND with a u32 variable and BIT(chiprev). The patch
adds a check that makes the function return NULL if that is the case.
Note that the NULL case is later handled by the bus-specific caller,
brcmf_usb_probe_cb() or brcmf_usb_reset_resume(), for example.

Found by a modified version of syzkaller.

UBSAN: shift-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
shift exponent 151055786 is too large for 64-bit type 'long unsigned int'
CPU: 0 PID: 1885 Comm: kworker/0:2 Tainted: G           O      5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
 dump_stack_lvl+0x57/0x7d
 ubsan_epilogue+0x5/0x40
 __ubsan_handle_shift_out_of_bounds.cold+0x53/0xdb
 ? lock_chain_count+0x20/0x20
 brcmf_fw_alloc_request.cold+0x19/0x3ea
 ? brcmf_fw_get_firmwares+0x250/0x250
 ? brcmf_usb_ioctl_resp_wait+0x1a7/0x1f0
 brcmf_usb_get_fwname+0x114/0x1a0
 ? brcmf_usb_reset_resume+0x120/0x120
 ? number+0x6c4/0x9a0
 brcmf_c_process_clm_blob+0x168/0x590
 ? put_dec+0x90/0x90
 ? enable_ptr_key_workfn+0x20/0x20
 ? brcmf_common_pd_remove+0x50/0x50
 ? rcu_read_lock_sched_held+0xa1/0xd0
 brcmf_c_preinit_dcmds+0x673/0xc40
 ? brcmf_c_set_joinpref_default+0x100/0x100
 ? rcu_read_lock_sched_held+0xa1/0xd0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 ? lock_acquire+0x19d/0x4e0
 ? find_held_lock+0x2d/0x110
 ? brcmf_usb_deq+0x1cc/0x260
 ? mark_held_locks+0x9f/0xe0
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 ? _raw_spin_unlock_irqrestore+0x47/0x50
 ? trace_hardirqs_on+0x1c/0x120
 ? brcmf_usb_deq+0x1a7/0x260
 ? brcmf_usb_rx_fill_all+0x5a/0xf0
 brcmf_attach+0x246/0xd40
 ? wiphy_new_nm+0x1476/0x1d50
 ? kmemdup+0x30/0x40
 brcmf_usb_probe+0x12de/0x1690
 ? brcmf_usbdev_qinit.constprop.0+0x470/0x470
 usb_probe_interface+0x25f/0x710
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 ? usb_match_id.part.0+0x88/0xc0
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 ? driver_allows_async_probing+0x120/0x120
 bus_for_each_drv+0x123/0x1a0
 ? bus_rescan_devices+0x20/0x20
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 ? trace_hardirqs_on+0x1c/0x120
 __device_attach+0x207/0x330
 ? device_bind_driver+0xb0/0xb0
 ? kobject_uevent_env+0x230/0x12c0
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 ? __mutex_unlock_slowpath+0xe7/0x660
 ? __fw_devlink_link_to_suppliers+0x550/0x550
 usb_set_configuration+0x984/0x1770
 ? kernfs_create_link+0x175/0x230
 usb_generic_driver_probe+0x69/0x90
 usb_probe_device+0x9c/0x220
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 ? driver_allows_async_probing+0x120/0x120
 bus_for_each_drv+0x123/0x1a0
 ? bus_rescan_devices+0x20/0x20
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 ? trace_hardirqs_on+0x1c/0x120
 __device_attach+0x207/0x330
 ? device_bind_driver+0xb0/0xb0
 ? kobject_uevent_env+0x230/0x12c0
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 ? __fw_devlink_link_to_suppliers+0x550/0x550
 usb_new_device.cold+0x463/0xf66
 ? hub_disconnect+0x400/0x400
 ? _raw_spin_unlock_irq+0x24/0x30
 hub_event+0x10d5/0x3330
 ? hub_port_debounce+0x280/0x280
 ? __lock_acquire+0x1671/0x5790
 ? wq_calc_node_cpumask+0x170/0x2a0
 ? lock_release+0x640/0x640
 ? rcu_read_lock_sched_held+0xa1/0xd0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 process_one_work+0x873/0x13e0
 ? lock_release+0x640/0x640
 ? pwq_dec_nr_in_flight+0x320/0x320
 ? rwlock_bug.part.0+0x90/0x90
 worker_thread+0x8b/0xd10
 ? __kthread_parkme+0xd9/0x1d0
 ? process_one_work+0x13e0/0x13e0
 kthread+0x379/0x450
 ? _raw_spin_unlock_irq+0x24/0x30
 ? set_kthread_struct+0x100/0x100
 ret_from_fork+0x1f/0x30

Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c | 5 +++++
 1 file changed, 5 insertions(+)

Comments

Kalle Valo Nov. 4, 2022, 10:58 a.m. UTC | #1 
Minsuk Kang <linuxlovemin@yonsei.ac.kr> wrote:

> This patch fixes a shift-out-of-bounds in brcmfmac that occurs in
> BIT(chiprev) when a 'chiprev' provided by the device is too large.
> It should also not be equal to or greater than BITS_PER_TYPE(u32)
> as we do bitwise AND with a u32 variable and BIT(chiprev). The patch
> adds a check that makes the function return NULL if that is the case.
> Note that the NULL case is later handled by the bus-specific caller,
> brcmf_usb_probe_cb() or brcmf_usb_reset_resume(), for example.
> 
> Found by a modified version of syzkaller.
> 
> UBSAN: shift-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
> shift exponent 151055786 is too large for 64-bit type 'long unsigned int'
> CPU: 0 PID: 1885 Comm: kworker/0:2 Tainted: G           O      5.14.0+ #132
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
> Workqueue: usb_hub_wq hub_event
> Call Trace:
>  dump_stack_lvl+0x57/0x7d
>  ubsan_epilogue+0x5/0x40
>  __ubsan_handle_shift_out_of_bounds.cold+0x53/0xdb
>  ? lock_chain_count+0x20/0x20
>  brcmf_fw_alloc_request.cold+0x19/0x3ea
>  ? brcmf_fw_get_firmwares+0x250/0x250
>  ? brcmf_usb_ioctl_resp_wait+0x1a7/0x1f0
>  brcmf_usb_get_fwname+0x114/0x1a0
>  ? brcmf_usb_reset_resume+0x120/0x120
>  ? number+0x6c4/0x9a0
>  brcmf_c_process_clm_blob+0x168/0x590
>  ? put_dec+0x90/0x90
>  ? enable_ptr_key_workfn+0x20/0x20
>  ? brcmf_common_pd_remove+0x50/0x50
>  ? rcu_read_lock_sched_held+0xa1/0xd0
>  brcmf_c_preinit_dcmds+0x673/0xc40
>  ? brcmf_c_set_joinpref_default+0x100/0x100
>  ? rcu_read_lock_sched_held+0xa1/0xd0
>  ? rcu_read_lock_bh_held+0xb0/0xb0
>  ? lock_acquire+0x19d/0x4e0
>  ? find_held_lock+0x2d/0x110
>  ? brcmf_usb_deq+0x1cc/0x260
>  ? mark_held_locks+0x9f/0xe0
>  ? lockdep_hardirqs_on_prepare+0x273/0x3e0
>  ? _raw_spin_unlock_irqrestore+0x47/0x50
>  ? trace_hardirqs_on+0x1c/0x120
>  ? brcmf_usb_deq+0x1a7/0x260
>  ? brcmf_usb_rx_fill_all+0x5a/0xf0
>  brcmf_attach+0x246/0xd40
>  ? wiphy_new_nm+0x1476/0x1d50
>  ? kmemdup+0x30/0x40
>  brcmf_usb_probe+0x12de/0x1690
>  ? brcmf_usbdev_qinit.constprop.0+0x470/0x470
>  usb_probe_interface+0x25f/0x710
>  really_probe+0x1be/0xa90
>  __driver_probe_device+0x2ab/0x460
>  ? usb_match_id.part.0+0x88/0xc0
>  driver_probe_device+0x49/0x120
>  __device_attach_driver+0x18a/0x250
>  ? driver_allows_async_probing+0x120/0x120
>  bus_for_each_drv+0x123/0x1a0
>  ? bus_rescan_devices+0x20/0x20
>  ? lockdep_hardirqs_on_prepare+0x273/0x3e0
>  ? trace_hardirqs_on+0x1c/0x120
>  __device_attach+0x207/0x330
>  ? device_bind_driver+0xb0/0xb0
>  ? kobject_uevent_env+0x230/0x12c0
>  bus_probe_device+0x1a2/0x260
>  device_add+0xa61/0x1ce0
>  ? __mutex_unlock_slowpath+0xe7/0x660
>  ? __fw_devlink_link_to_suppliers+0x550/0x550
>  usb_set_configuration+0x984/0x1770
>  ? kernfs_create_link+0x175/0x230
>  usb_generic_driver_probe+0x69/0x90
>  usb_probe_device+0x9c/0x220
>  really_probe+0x1be/0xa90
>  __driver_probe_device+0x2ab/0x460
>  driver_probe_device+0x49/0x120
>  __device_attach_driver+0x18a/0x250
>  ? driver_allows_async_probing+0x120/0x120
>  bus_for_each_drv+0x123/0x1a0
>  ? bus_rescan_devices+0x20/0x20
>  ? lockdep_hardirqs_on_prepare+0x273/0x3e0
>  ? trace_hardirqs_on+0x1c/0x120
>  __device_attach+0x207/0x330
>  ? device_bind_driver+0xb0/0xb0
>  ? kobject_uevent_env+0x230/0x12c0
>  bus_probe_device+0x1a2/0x260
>  device_add+0xa61/0x1ce0
>  ? __fw_devlink_link_to_suppliers+0x550/0x550
>  usb_new_device.cold+0x463/0xf66
>  ? hub_disconnect+0x400/0x400
>  ? _raw_spin_unlock_irq+0x24/0x30
>  hub_event+0x10d5/0x3330
>  ? hub_port_debounce+0x280/0x280
>  ? __lock_acquire+0x1671/0x5790
>  ? wq_calc_node_cpumask+0x170/0x2a0
>  ? lock_release+0x640/0x640
>  ? rcu_read_lock_sched_held+0xa1/0xd0
>  ? rcu_read_lock_bh_held+0xb0/0xb0
>  ? lockdep_hardirqs_on_prepare+0x273/0x3e0
>  process_one_work+0x873/0x13e0
>  ? lock_release+0x640/0x640
>  ? pwq_dec_nr_in_flight+0x320/0x320
>  ? rwlock_bug.part.0+0x90/0x90
>  worker_thread+0x8b/0xd10
>  ? __kthread_parkme+0xd9/0x1d0
>  ? process_one_work+0x13e0/0x13e0
>  kthread+0x379/0x450
>  ? _raw_spin_unlock_irq+0x24/0x30
>  ? set_kthread_struct+0x100/0x100
>  ret_from_fork+0x1f/0x30
> 
> Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
> Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
> Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
> Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>

Patch applied to wireless-next.git, thanks.

81d17f6f3331 wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request()
diff mbox series

Patch

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
index f2207793f6e2..09d2f2dc2b46 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
@@ -803,6 +803,11 @@  brcmf_fw_alloc_request(u32 chip, u32 chiprev,
 	u32 i, j;
 	char end = '\0';
 
+	if (chiprev >= BITS_PER_TYPE(u32)) {
+		brcmf_err("Invalid chip revision %u\n", chiprev);
+		return NULL;
+	}
+
 	for (i = 0; i < table_size; i++) {
 		if (mapping_table[i].chipid == chip &&
 		    mapping_table[i].revmask & BIT(chiprev))