diff mbox series

[3/4] arm64: dts: qcom: Add initial device tree for SM6375

Message ID 20221022194218.210941-3-konrad.dybcio@somainline.org
State Superseded
Headers show
Series None | expand

Commit Message

Konrad Dybcio Oct. 22, 2022, 7:42 p.m. UTC
Add an initial device tree for the SM6375 (SD695) SoC.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 arch/arm64/boot/dts/qcom/sm6375.dtsi | 808 +++++++++++++++++++++++++++
 1 file changed, 808 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm6375.dtsi

Comments

Bjorn Andersson Nov. 6, 2022, 4 a.m. UTC | #1
On Sat, Oct 22, 2022 at 09:42:16PM +0200, Konrad Dybcio wrote:
[..]
> +	clocks {
> +		xo_board: xo-board {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <19200000>;
> +			clock-output-names = "xo_board";

The only reason that you would need this is if you have code somewhere
relying on clock lookup based on global naming. Can you please fix that
up and drop clock-output-names?

A -clk suffix would be nice on the node as well (xo-board-clk).

> +		};
> +
> +		sleep_clk: sleep-clk {
> +			compatible = "fixed-clock";
> +			clock-frequency = <32000>;
> +			#clock-cells = <0>;
> +		};
> +	};
[..]
> +	reserved_memory: reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		hyp_mem: memory@80000000 {

I believe "memory" is still reserved, so please rename these nodes.

> +			reg = <0 0x80000000 0 0x600000>;
> +			no-map;
> +		};
> +
[..]
> +	smem: smem {
> +		compatible = "qcom,smem";

Please move the compatible and hwlocks to the &smem_mem node directly.

> +		memory-region = <&smem_mem>;
> +		hwlocks = <&tcsr_mutex 3>;
> +	};

Regards,
Bjorn
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
new file mode 100644
index 000000000000..30cdc7d50f72
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -0,0 +1,808 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/clock/qcom,sm6375-gcc.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_0: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+				      compatible = "cache";
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_100>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_100: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_200: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_300>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_300: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_400: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_500: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_600: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_700: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <915>;
+				min-residency-us = <4001>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <526>;
+				exit-latency-us = <1854>;
+				min-residency-us = <5555>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				idle-state-name = "cluster-power-collapse";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <2752>;
+				exit-latency-us = <3048>;
+				min-residency-us = <6118>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-sm6375", "qcom,scm";
+			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
+			clock-names = "core";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@80000000 {
+			reg = <0 0x80000000 0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: memory@80700000 {
+			reg = <0 0x80700000 0 0x100000>;
+			no-map;
+		};
+
+		reserved_xbl_uefi: memory@80880000 {
+			reg = <0 0x80880000 0 0x14000>;
+			no-map;
+		};
+
+		smem_mem: smem@80900000 {
+			reg = <0 0x80900000 0 0x200000>;
+			no-map;
+		};
+
+		fw_mem: memory@80b00000 {
+			reg = <0 0x80b00000 0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap_mem: memory@80c00000 {
+			reg = <0 0x80c00000 0 0x1e00000>;
+			no-map;
+		};
+
+		dfps_data_mem: memory@85e00000 {
+			reg = <0 0x85e00000 0 0x100000>;
+			no-map;
+		};
+
+		pil_wlan_mem: memory@86500000 {
+			reg = <0 0x86500000 0 0x200000>;
+			no-map;
+		};
+
+		pil_adsp_mem: memory@86700000 {
+			reg = <0 0x86700000 0 0x2000000>;
+			no-map;
+		};
+
+		pil_cdsp_mem: memory@88700000 {
+			reg = <0 0x88700000 0 0x1e00000>;
+			no-map;
+		};
+
+		pil_video_mem: memory@8a500000 {
+			reg = <0 0x8a500000 0 0x500000>;
+			no-map;
+		};
+
+		pil_ipa_fw_mem: memory@8aa00000 {
+			reg = <0 0x8aa00000 0 0x10000>;
+			no-map;
+		};
+
+		pil_ipa_gsi_mem: memory@8aa10000 {
+			reg = <0 0x8aa10000 0 0xa000>;
+			no-map;
+		};
+
+		pil_gpu_micro_code_mem: memory@8aa1a000 {
+			reg = <0 0x8aa1a000 0 0x2000>;
+			no-map;
+		};
+
+		pil_mpss_wlan_mem: memory@8b800000 {
+			reg = <0 0x8b800000 0 0x10000000>;
+			no-map;
+		};
+
+		removed_mem: memory@c0000000 {
+			reg = <0 0xc0000000 0 0x5100000>;
+			no-map;
+		};
+
+		debug_mem: memory@ffb00000 {
+			reg = <0 0xffb00000 0 0xc0000>;
+			no-map;
+		};
+
+		last_log_mem: memory@ffbc0000 {
+			reg = <0 0xffbc0000 0 0x80000>;
+			no-map;
+		};
+
+		cmdline_region: memory@ffd00000 {
+			reg = <0 0xffd00000 0 0x1000>;
+			no-map;
+		};
+	};
+
+	rpm-glink {
+		compatible = "qcom,glink-rpm";
+		interrupts-extended = <&ipcc IPCC_CLIENT_AOP
+					     IPCC_MPROC_SIGNAL_GLINK_QMP
+					     IRQ_TYPE_EDGE_RISING>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+		rpm_requests: rpm-requests {
+			compatible = "qcom,rpm-sm6375";
+			qcom,glink-channels = "rpm_requests";
+
+			rpmcc: clock-controller {
+				compatible = "qcom,rpmcc-sm6375", "qcom,rpmcc";
+				#clock-cells = <1>;
+			};
+
+			rpmpd: power-controller {
+				compatible = "qcom,sm6375-rpmpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmpd_opp_table>;
+
+				rpmpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmpd_opp_ret: opp1 {
+						opp-level = <RPM_SMD_LEVEL_RETENTION>;
+					};
+
+					rpmpd_opp_min_svs: opp2 {
+						opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+					};
+
+					rpmpd_opp_low_svs: opp3 {
+						opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+					};
+
+					rpmpd_opp_svs: opp4 {
+						opp-level = <RPM_SMD_LEVEL_SVS>;
+					};
+
+					rpmpd_opp_svs_plus: opp5 {
+						opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+					};
+
+					rpmpd_opp_nom: opp6 {
+						opp-level = <RPM_SMD_LEVEL_NOM>;
+					};
+
+					rpmpd_opp_nom_plus: opp7 {
+						opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+					};
+
+					rpmpd_opp_turbo: opp8 {
+						opp-level = <RPM_SMD_LEVEL_TURBO>;
+					};
+
+					rpmpd_opp_turbo_no_cpr: opp9 {
+						opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+					};
+				};
+			};
+		};
+	};
+
+	smem: smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		ipcc: mailbox@208000 {
+			compatible = "qcom,sm6375-ipcc", "qcom,ipcc";
+			reg = <0 0x00208000 0 0x1000>;
+			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		tcsr_mutex: hwlock@340000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x00340000 0x0 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		tlmm: pinctrl@500000 {
+			compatible = "qcom,sm6375-tlmm";
+			reg = <0 0x00500000 0 0x800000>;
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&tlmm 0 0 157>;
+			/* TODO: Hook up MPM as wakeup-parent when it's there */
+			interrupt-controller;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			#gpio-cells = <2>;
+		};
+
+		gcc: clock-controller@1400000 {
+			compatible = "qcom,sm6375-gcc";
+			reg = <0 0x01400000 0 0x1f0000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+				 <&sleep_clk>;
+			#power-domain-cells = <1>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		usb_1_hsphy: phy@162b000 {
+			compatible = "qcom,sm6375-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x0162b000 0 0x400>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		spmi_bus: spmi@1c40000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x01c40000 0 0x1100>,
+			      <0 0x01e00000 0 0x2000000>,
+			      <0 0x03e00000 0 0x100000>,
+			      <0 0x03f00000 0 0xa0000>,
+			      <0 0x01c0a000 0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		rpm_msg_ram: sram@45f0000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0 0x045f0000 0 0x7000>;
+		};
+
+		usb_1: usb@4ef8800 {
+			compatible = "qcom,sm6375-dwc3", "qcom,dwc3";
+			reg = <0 0x04ef8800 0 0x400>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <133333333>;
+
+			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			/*
+			 * This property is there to allow USB2 to work, as
+			 * USB3 is not implemented yet - (re)move it when
+			 * proper support is in place.
+			 */
+			qcom,select-utmi-as-pipe-clk;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@4e00000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x04e00000 0 0xcd00>;
+				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+				maximum-speed = "high-speed";
+				phys = <&usb_1_hsphy>;
+				phy-names = "usb2-phy";
+				iommus = <&apps_smmu 0xe0 0x0>;
+
+				/* Yes, this impl *does* have an unfunny number of quirks.. */
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb2-gadget-lpm-disable;
+				snps,dis_u2_susphy_quirk;
+				snps,is-utmi-l1-suspend;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				snps,usb3_lpm_capable;
+				snps,has-lpm-erratum;
+				tx-fifo-resize;
+			};
+		};
+
+		apps_smmu: iommu@c600000 {
+			compatible = "qcom,sm6375-smmu-500", "arm,mmu-500";
+			reg = <0 0x0c600000 0 0x100000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&gcc HLOS1_VOTE_MM_SNOC_MMU_TBU_RT_GDSC>,
+					<&gcc HLOS1_VOTE_MM_SNOC_MMU_TBU_NRT_GDSC>,
+					<&gcc HLOS1_VOTE_TURING_MMU_TBU0_GDSC>;
+			#global-interrupts = <1>;
+			#iommu-cells = <2>;
+		};
+
+		intc: interrupt-controller@f200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x0f200000 0x0 0x10000>,  /* GICD */
+			      <0x0 0x0f240000 0x0 0x100000>; /* GICR * 8 */
+			interrupts = <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#redistributor-regions = <1>;
+			#interrupt-cells = <3>;
+			redistributor-stride = <0 0x20000>;
+			interrupt-controller;
+		};
+
+		timer@f420000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x0f420000 0 0x1000>;
+			ranges = <0 0 0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@f421000 {
+				reg = <0x0f421000 0x1000>, <0x0f422000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@f423000 {
+				reg = <0x0f243000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@f425000 {
+				reg = <0x0f425000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@f427000 {
+				reg = <0x0f427000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@f429000 {
+				reg = <0x0f429000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@f42b000 {
+				reg = <0x0f42b000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@f42d000 {
+				reg = <0x0f42d000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+
+		cpufreq_hw: cpufreq@fd91000 {
+			compatible = "qcom,sm6375-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x0fd91000 0 0x1000>, <0 0x0fd92000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1";
+			#freq-domain-cells = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};