| Message ID | 20221101141658.3631342-10-andre.przywara@arm.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | None | expand |
Dne torek, 01. november 2022 ob 15:16:58 CET je Andre Przywara napisal(a): > The Allwinner F1C100s series of SoCs contain a LRADC (aka. KEYADC) > compatible to the version in other SoCs. > The manual doesn't mention the ratio of the input voltage that is used, > but comparing actual measurements with the values in the register > suggests that it is 3/4 of Vref. > > Add the DT node describing the base address and interrupt. As in the > older SoCs, there is no explicit reset or clock gate, also there is a > dedicated, non-multiplexed pin, so need for more properties. > > Signed-off-by: Andre Przywara <andre.przywara@arm.com> > --- > arch/arm/boot/dts/suniv-f1c100s.dtsi | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi > b/arch/arm/boot/dts/suniv-f1c100s.dtsi index d29b48f23b89a..03592c8e63fed > 100644 > --- a/arch/arm/boot/dts/suniv-f1c100s.dtsi > +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi > @@ -262,6 +262,14 @@ ir: ir@1c22c00 { > status = "disabled"; > }; > > + lradc: lradc@1c23400 { > + compatible = "allwinner,suniv-f1c100s- lradc", > + "allwinner,sun8i-a83t-r- lradc"; > + reg = <0x01c23400 0x100>; User manual says 0x400 is reserved for this peripheral. With that fixed: Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Best regards, Jernej > + interrupts = <22>; > + status = "disabled"; > + }; > + > uart0: serial@1c25000 { > compatible = "snps,dw-apb-uart"; > reg = <0x01c25000 0x400>;
diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi index d29b48f23b89a..03592c8e63fed 100644 --- a/arch/arm/boot/dts/suniv-f1c100s.dtsi +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi @@ -262,6 +262,14 @@ ir: ir@1c22c00 { status = "disabled"; }; + lradc: lradc@1c23400 { + compatible = "allwinner,suniv-f1c100s-lradc", + "allwinner,sun8i-a83t-r-lradc"; + reg = <0x01c23400 0x100>; + interrupts = <22>; + status = "disabled"; + }; + uart0: serial@1c25000 { compatible = "snps,dw-apb-uart"; reg = <0x01c25000 0x400>;
The Allwinner F1C100s series of SoCs contain a LRADC (aka. KEYADC) compatible to the version in other SoCs. The manual doesn't mention the ratio of the input voltage that is used, but comparing actual measurements with the values in the register suggests that it is 3/4 of Vref. Add the DT node describing the base address and interrupt. As in the older SoCs, there is no explicit reset or clock gate, also there is a dedicated, non-multiplexed pin, so need for more properties. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- arch/arm/boot/dts/suniv-f1c100s.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)