new file mode 100644
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/cirrus,cs48l32.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS48L32 audio codec pinctrl driver
+
+maintainers:
+ - patches@opensource.cirrus.com
+
+description: |
+The Cirrus Logic CS48L32 codec has a number of GPIO functions for
+interfacing to external hardware. Certain groups of GPIO pins also
+have an alternate function.
+
+The properties for this driver exist within the parent MFD driver node.
+See the core bindings for the parent MFD driver for an example:
+
+ Documentation/devicetree/bindings/mfd/cirrus,cs48l32.yaml
+
+And the generic pinctrl bindings:
+
+ Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+properties:
+ pin-settings:
+ description:
+ One subnode is required to contain the default settings. It
+ contains an arbitrary number of configuration subnodes, one for
+ each group or pin configuration you want to apply as a default.
+ type: object
+ patternProperties:
+ '-pins$':
+ type: object
+ allOf:
+ - $ref: "pincfg-node.yaml#"
+ - $ref: "pinmux-node.yaml#"
+ properties:
+ groups:
+ description:
+ Name of one pin group to configure.
+ enum: [ asp1, asp2, in1-pdm, in2-pdm,
+ gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
+ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13,
+ gpio14, gpio15, gpio16 ]
+
+ function:
+ description:
+ Name of function to assign to this group.
+ enum: [ asp1, asp2, in1-pdm, in2-pdm, spi2, io, dsp-gpio,
+ irq1, fll1-clk, fll1-lock, opclk, opclk-dsp, uart,
+ input-path-signal-detect,
+ ultrasonic-in1-activity-detect, ultrasonic-in2-activity-detect,
+ dma-ch0-programmable-transfer-complete,
+ dma-ch1-programmable-transfer-complete,
+ dma-ch2-programmable-transfer-complete,
+ dma-ch3-programmable-transfer-complete,
+ dma-ch4-programmable-transfer-complete,
+ dma-ch5-programmable-transfer-complete,
+ dma-ch6-programmable-transfer-complete,
+ dma-ch7-programmable-transfer-complete,
+ sample-rate-change-trigger-a, sample-rate-change-trigger-b,
+ sample-rate-change-trigger-c, sample-rate-change-trigger-d,
+ timer1-irq-ch1, timer1-irq-ch2, timer1-irq-ch3, timer1-irq-ch4,
+ timer2-irq-ch1, timer2-irq-ch2, timer2-irq-ch3, timer2-irq-ch4,
+ timer3-irq-ch1, timer3-irq-ch2, timer3-irq-ch3, timer3-irq-ch4,
+ timer4-irq-ch1, timer4-irq-ch2, timer4-irq-ch3, timer4-irq-ch4,
+ timer5-irq-ch1, timer5-irq-ch2, timer5-irq-ch3, timer5-irq-ch4,
+ timer-1, timer-2, timer-3, timer-4, timer-5 ]
+
+ bias-disable: true
+
+ bias-bus-hold: true
+
+ bias-pull-up: true
+
+ bias-pull-down: true
+
+ drive-push-pull: true
+
+ drive-open-drain: true
+
+ drive-strength:
+ description:
+ Drive strength in mA.
+ enum: [ 4, 8 ]
+
+ output-low: true
+
+ output-high: true
+
+ additionalProperties: false
+
+ required:
+ - groups
+
+ additionalProperties: false
Codecs in this family have multiple digital I/O functions for audio, DSP subsystem, GPIO and various special functions. All muxable pins are selectable as either a GPIO or one of the available alternate functions. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> --- .../bindings/pinctrl/cirrus,cs48l32.yaml | 98 +++++++++++++++++++ 1 file changed, 98 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/cirrus,cs48l32.yaml