@@ -6,6 +6,7 @@
/dts-v1/;
#include "dm816x.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "DM8168 EVM";
@@ -85,8 +86,12 @@
ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */
nand@0,0 {
+ compatible = "ti,omap2-nand";
linux,mtd-name= "micron,mt29f2g16aadwp";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
#address-cells = <1>;
#size-cells = <1>;
ti,nand-ecc-opt = "bch8";
@@ -106,12 +111,9 @@
gpmc,access-ns = <64>;
gpmc,rd-cycle-ns = <82>;
gpmc,wr-cycle-ns = <82>;
- gpmc,wait-on-read = "true";
- gpmc,wait-on-write = "true";
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
- gpmc,wait-monitoring-ns = <0>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
partition@0 {
@@ -183,6 +183,10 @@
dma-names = "rxtx";
gpmc,num-cs = <6>;
gpmc,num-waitpins = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
i2c1: i2c@48028000 {
Make gpmc node gpio+interrupt capable. Add compatible id and interrupt to NAND node. Signed-off-by: Roger Quadros <rogerq@ti.com> --- arch/arm/boot/dts/dm8168-evm.dts | 8 +++++--- arch/arm/boot/dts/dm816x.dtsi | 4 ++++ 2 files changed, 9 insertions(+), 3 deletions(-) -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html