| Message ID | 20110316071924.453.13789.stgit@otae.warmcat.com |
|---|---|
| State | New |
| Headers | show |
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index eee0bb8..14f5b50 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -309,7 +309,7 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev) pdata = pdev->dev.platform_data; dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG); - if (dev->rev >= OMAP_I2C_REV_ON_4430) + if (pdata->rev == OMAP_I2C_IP_VERSION_2) omap_i2c_write_reg(dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1); else omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
This solves the main problem the patch series is about. Prior to this patch on OMAP3530 the driver wrongly interprets the I2C peripheral unit's own reported revision as meaning it is running on an IP V2 device and must use the extended registers. In fact OMAP3530 is IP V1 with the smaller register set, the reason for the confusion is that the hardware does in fact report having the same IP revision index as is found on an OMAP4430, which really is IP V2 and has the extended registers. This corrects the test for which registers to use so that it decides using hwmod knowledge found in the platform_data. Cc: patches@linaro.org Cc: Ben Dooks <ben-linux@fluff.org> Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> --- drivers/i2c/busses/i2c-omap.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)