@@ -16,6 +16,7 @@ Main node required properties:
"arm,cortex-a15-gic"
"arm,cortex-a7-gic"
"arm,cortex-a9-gic"
+ "arm,eb11mp-gic"
"arm,gic-400"
"arm,pl390"
"arm,tc11mp-gic"
@@ -10,7 +10,8 @@
#include <linux/irqchip/arm-gic.h>
#define REALVIEW_SYS_LOCK_OFFSET 0x20
-#define REALVIEW_PB11MP_SYS_PLD_CTRL1 0x74
+#define REALVIEW_SYS_PLD_CTRL1 0x74
+#define REALVIEW_EB_REVB_SYS_PLD_CTRL1 0xD8
#define VERSATILE_LOCK_VAL 0xA05F
#define PLD_INTMODE_MASK BIT(22)|BIT(23)|BIT(24)
#define PLD_INTMODE_LEGACY 0x0
@@ -18,26 +19,57 @@
#define PLD_INTMODE_NEW_NO_DCC BIT(23)
#define PLD_INTMODE_FIQ_ENABLE BIT(24)
+/* For some reason RealView EB Rev B moved this register */
+static const struct of_device_id syscon_pldset_of_match[] = {
+ {
+ .compatible = "arm,realview-eb11mp-revb-syscon",
+ .data = (void *)REALVIEW_EB_REVB_SYS_PLD_CTRL1,
+ },
+ {
+ .compatible = "arm,realview-eb11mp-revc-syscon",
+ .data = (void *)REALVIEW_SYS_PLD_CTRL1,
+ },
+ {
+ .compatible = "arm,realview-eb-syscon",
+ .data = (void *)REALVIEW_SYS_PLD_CTRL1,
+ },
+ {
+ .compatible = "arm,realview-pb11mp-syscon",
+ .data = (void *)REALVIEW_SYS_PLD_CTRL1,
+ },
+ {},
+};
+
static int __init
realview_gic_of_init(struct device_node *node, struct device_node *parent)
{
static struct regmap *map;
+ struct device_node *np;
+ const struct of_device_id *gic_id;
+ u32 pld1_ctrl;
+
+ np = of_find_matching_node_and_match(NULL, syscon_pldset_of_match,
+ &gic_id);
+ if (!np)
+ return -ENODEV;
+ pld1_ctrl = (u32)gic_id->data;
/* The PB11MPCore GIC needs to be configured in the syscon */
- map = syscon_regmap_lookup_by_compatible("arm,realview-pb11mp-syscon");
+ map = syscon_node_to_regmap(np);
if (!IS_ERR(map)) {
/* new irq mode with no DCC */
regmap_write(map, REALVIEW_SYS_LOCK_OFFSET,
VERSATILE_LOCK_VAL);
- regmap_update_bits(map, REALVIEW_PB11MP_SYS_PLD_CTRL1,
+ regmap_update_bits(map, pld1_ctrl,
PLD_INTMODE_NEW_NO_DCC,
PLD_INTMODE_MASK);
regmap_write(map, REALVIEW_SYS_LOCK_OFFSET, 0x0000);
- pr_info("TC11MP GIC: set up interrupt controller to NEW mode, no DCC\n");
+ pr_info("RealView GIC: set up interrupt controller to NEW mode, no DCC\n");
} else {
- pr_err("TC11MP GIC setup: could not find syscon\n");
- return -ENXIO;
+ pr_err("RealView GIC setup: could not find syscon\n");
+ return -ENODEV;
}
return gic_of_init(node, parent);
}
IRQCHIP_DECLARE(armtc11mp_gic, "arm,tc11mp-gic", realview_gic_of_init);
+IRQCHIP_DECLARE(armeb11mp_gic, "arm,eb11mp-gic", realview_gic_of_init);
In the add-on file for the GIC dealing with the RealView family we currently only handle the PB11MPCore, let's extend this to manage the RealView EB ARM11MPCore as well. The Revision B of the ARM11MPCore core tile is a bit special and needs special handling as it moves a system control register around at random. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v1->v2: - Detect syscon register location based on the syscon compatible string instead of the GIC compatible string, just define one compatible string for the 11mp test chip GIC. - Consistently return -ENODEV This can be applied in isolation from the other patches so Marc one you're happy with it, please take it into the IRQchip tree. --- .../bindings/interrupt-controller/arm,gic.txt | 1 + drivers/irqchip/irq-gic-realview.c | 44 +++++++++++++++++++--- 2 files changed, 39 insertions(+), 6 deletions(-) -- 2.4.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html