| Message ID | 20221111084255.8963-2-johan+linaro@kernel.org |
|---|---|
| State | Accepted |
| Commit | d8a5b59c5fc75c99ba17e3eb1a8f580d8d172b28 |
| Headers | show |
| Series | phy: qcom-qmp-combo: preparatory fixes (set 1/3) | expand |
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c index 5e11b6a1d189..bb38b18258ca 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c @@ -1270,8 +1270,8 @@ static const struct qmp_phy_cfg sm8250_dpphy_cfg = { .swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2, .pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2, - .clk_list = qmp_v4_phy_clk_l, - .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l), + .clk_list = qmp_v4_sm8250_usbphy_clk_l, + .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l), .reset_list = msm8996_usb3phy_reset_l, .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), .vreg_list = qmp_phy_vreg_l,
The SM8250 only uses three clocks but the DP configuration erroneously described four clocks. In case the DP part of the PHY is initialised before the USB part, this would lead to uninitialised memory beyond the bulk-clocks array to be treated as a clock pointer as the clocks are requested based on the USB configuration. Fixes: aff188feb5e1 ("phy: qcom-qmp: add support for sm8250-usb3-dp phy") Cc: stable@vger.kernel.org # 5.13 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> --- drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)