diff mbox series

[4/6] soc: qcom: geni-se: add support for I2C Master Hub wrapper variant

Message ID 20221114-narmstrong-sm8550-upstream-i2c-master-hub-v1-4-64449106a148@linaro.org
State New
Headers show
Series soc: qcom: add support for the I2C Master Hub | expand

Commit Message

Neil Armstrong Nov. 16, 2022, 10:21 a.m. UTC
The I2C Master Hub is a stripped down version of the GENI Serial Engine
QUP Wrapper Controller but only supporting I2C serial engines without
DMA support.

This adds the clock list for the I2C Master Hub variant to a new desc
struct then passes it through the I2C Master Hub compatible match data.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 drivers/soc/qcom/qcom-geni-se.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index f4f54d92a01a..8430a0192bb9 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -930,8 +930,18 @@  static const struct geni_se_desc qup_desc = {
 	.num_clks = ARRAY_SIZE(qup_clks),
 };
 
+static const char * const i2c_master_hub_clks[] = {
+	"s-ahb",
+};
+
+static const struct geni_se_desc i2c_master_hub_desc = {
+	.clks = i2c_master_hub_clks,
+	.num_clks = ARRAY_SIZE(i2c_master_hub_clks),
+};
+
 static const struct of_device_id geni_se_dt_match[] = {
 	{ .compatible = "qcom,geni-se-qup", .data = &qup_desc },
+	{ .compatible = "qcom,geni-se-i2c-master-hub", .data = &i2c_master_hub_desc },
 	{}
 };
 MODULE_DEVICE_TABLE(of, geni_se_dt_match);