| Message ID | 20221118192241.29384-3-quic_molvera@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | None | expand |
On 11/21/2022 5:07 AM, Konrad Dybcio wrote: > > On 18.11.2022 20:22, Melody Olvera wrote: >> Add DTs for Qualcomm IDP platforms using the QDU1000 and QRU1000 >> SoCs. >> >> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> >> --- >> arch/arm64/boot/dts/qcom/Makefile | 2 + >> arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 266 +++++++++++++++++++++++ >> arch/arm64/boot/dts/qcom/qru1000-idp.dts | 266 +++++++++++++++++++++++ >> 3 files changed, 534 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/qdu1000-idp.dts >> create mode 100644 arch/arm64/boot/dts/qcom/qru1000-idp.dts >> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >> index afe496a93f94..da66d4a0a884 100644 >> --- a/arch/arm64/boot/dts/qcom/Makefile >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -53,7 +53,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb >> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb >> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb >> +dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb >> dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb >> +dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb >> diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts >> new file mode 100644 >> index 000000000000..5aed483201fa >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts >> @@ -0,0 +1,266 @@ >> +// SPDX-License-Identifier: BSD-3-Clause >> +/* >> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. >> + */ >> + >> +/dts-v1/; >> + >> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> >> +#include "qdu1000.dtsi" >> +#include "pm8150.dtsi" >> + >> +/ { >> + model = "Qualcomm Technologies, Inc. QDU1000 IDP"; >> + compatible = "qcom,qdu1000-idp", "qcom,qdu1000"; > Missing chassis-type Sorry, not sure what you mean here... Do you mean like QRD, HDK, MTP, etc.? If so, then IDP is the chassis type. > >> + >> + aliases { >> + serial0 = &uart7; >> + }; >> + >> + clocks { >> + xo_board: xo-board { >> + compatible = "fixed-clock"; >> + clock-frequency = <19200000>; >> + clock-output-names = "xo_board"; >> + #clock-cells = <0>; >> + }; >> + >> + sleep_clk: sleep-clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <32000>; >> + #clock-cells = <0>; >> + }; >> + >> + pcie_0_pipe_clk: pcie-0-pipe-clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <1000>; >> + clock-output-names = "pcie_0_pipe_clk"; >> + #clock-cells = <0>; >> + }; >> + >> + pcie_0_phy_aux_clk: pcie-0-phy-aux-clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <1000>; >> + clock-output-names = "pcie_0_phy_aux_clk"; >> + #clock-cells = <0>; >> + }; >> + >> + usb3_phy_wrapper_pipe_clk: usb3-phy-wrapper-pipe-clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <1000>; >> + clock-output-names = "usb3_phy_wrapper_pipe_clk"; >> + #clock-cells = <0>; >> + }; > Do these pipe clocks not come from QMPPHY? Yes they do; I just don't have those phys ready yet. I can put a TODO here to move them if necessary. > >> + }; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> + >> + ppvar_sys: ppvar-sys-regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "ppvar_sys"; > Any chance you could add the voltage of this regulator here, > so the DT can better represent the hardware? Sure. Thanks, Melody > Konrad >> + regulator-always-on; >> + regulator-boot-on; >> + }; >> + >> + vph_pwr: vph-pwr-regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "vph_pwr"; >> + regulator-min-microvolt = <3700000>; >> + regulator-max-microvolt = <3700000>; >> + >> + regulator-always-on; >> + regulator-boot-on; >> + >> + vin-supply = <&ppvar_sys>; >> + }; >> +}; >> + >> +&apps_rsc { >> + regulators { >> + compatible = "qcom,pm8150-rpmh-regulators"; >> + qcom,pmic-id = "a"; >> + >> + vdd-s1-supply = <&vph_pwr>; >> + vdd-s2-supply = <&vph_pwr>; >> + vdd-s3-supply = <&vph_pwr>; >> + vdd-s4-supply = <&vph_pwr>; >> + vdd-s5-supply = <&vph_pwr>; >> + vdd-s6-supply = <&vph_pwr>; >> + vdd-s7-supply = <&vph_pwr>; >> + vdd-s8-supply = <&vph_pwr>; >> + vdd-s9-supply = <&vph_pwr>; >> + vdd-s10-supply = <&vph_pwr>; >> + >> + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; >> + vdd-l2-l10-supply = <&vph_pwr>; >> + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>; >> + vdd-l6-l9-supply = <&vreg_s6a_0p9>; >> + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>; >> + vdd-l13-l16-l17-supply = <&vph_pwr>; >> + >> + vreg_s2a_0p5: smps2 { >> + regulator-name = "vreg_s2a_0p5"; >> + regulator-min-microvolt = <320000>; >> + regulator-max-microvolt = <570000>; >> + }; >> + >> + vreg_s3a_1p05: smps3 { >> + regulator-name = "vreg_s3a_1p05"; >> + regulator-min-microvolt = <950000>; >> + regulator-max-microvolt = <1170000>; >> + }; >> + >> + vreg_s4a_1p8: smps4 { >> + regulator-name = "vreg_s4a_1p8"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + }; >> + >> + vreg_s5a_2p0: smps5 { >> + regulator-name = "vreg_s5a_2p0"; >> + regulator-min-microvolt = <1904000>; >> + regulator-max-microvolt = <2000000>; >> + }; >> + >> + vreg_s6a_0p9: smps6 { >> + regulator-name = "vreg_s6a_0p9"; >> + regulator-min-microvolt = <920000>; >> + regulator-max-microvolt = <1128000>; >> + }; >> + >> + vreg_s7a_1p2: smps7 { >> + regulator-name = "vreg_s7a_1p2"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1200000>; >> + }; >> + >> + vreg_s8a_1p3: smps8 { >> + regulator-name = "vreg_s8a_1p3"; >> + regulator-min-microvolt = <1352000>; >> + regulator-max-microvolt = <1352000>; >> + }; >> + >> + vreg_l1a_0p91: ldo1 { >> + regulator-name = "vreg_l1a_0p91"; >> + regulator-min-microvolt = <312000>; >> + regulator-max-microvolt = <1304000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l2a_2p3: ldo2 { >> + regulator-name = "vreg_l2a_2p3"; >> + regulator-min-microvolt = <2970000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l3a_1p2: ldo3 { >> + regulator-name = "vreg_l3a_1p2"; >> + regulator-min-microvolt = <920000>; >> + regulator-max-microvolt = <1260000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l5a_0p8: ldo5 { >> + regulator-name = "vreg_l5a_0p8"; >> + regulator-min-microvolt = <312000>; >> + regulator-max-microvolt = <1304000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l6a_0p91: ldo6 { >> + regulator-name = "vreg_l6a_0p91"; >> + regulator-min-microvolt = <880000>; >> + regulator-max-microvolt = <950000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l7a_1p8: ldo7 { >> + regulator-name = "vreg_l7a_1p8"; >> + regulator-min-microvolt = <1650000>; >> + regulator-max-microvolt = <2000000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + >> + }; >> + >> + vreg_l8a_0p91: ldo8 { >> + regulator-name = "vreg_l8a_0p91"; >> + regulator-min-microvolt = <888000>; >> + regulator-max-microvolt = <925000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l9a_0p91: ldo9 { >> + regulator-name = "vreg_l8a_0p91"; >> + regulator-min-microvolt = <312000>; >> + regulator-max-microvolt = <1304000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l10a_2p95: ldo10 { >> + regulator-name = "vreg_l10a_2p95"; >> + regulator-min-microvolt = <2700000>; >> + regulator-max-microvolt = <3544000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l11a_0p91: ldo11 { >> + regulator-name = "vreg_l11a_0p91"; >> + regulator-min-microvolt = <800000>; >> + regulator-max-microvolt = <1000000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l12a_1p8: ldo12 { >> + regulator-name = "vreg_l12a_1p8"; >> + regulator-min-microvolt = <1504000>; >> + regulator-max-microvolt = <1504000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l14a_1p8: ldo14 { >> + regulator-name = "vreg_l14a_1p8"; >> + regulator-min-microvolt = <1650000>; >> + regulator-max-microvolt = <1950000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l15a_1p8: ldo15 { >> + regulator-name = "vreg_l15a_1p8"; >> + regulator-min-microvolt = <1504000>; >> + regulator-max-microvolt = <2000000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l16a_1p8: ldo16 { >> + regulator-name = "vreg_l16a_1p8"; >> + regulator-min-microvolt = <1710000>; >> + regulator-max-microvolt = <1890000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l17a_3p3: ldo17 { >> + regulator-name = "vreg_l17a_3p3"; >> + regulator-min-microvolt = <3000000>; >> + regulator-max-microvolt = <3544000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l18a_1p2: ldo18 { >> + regulator-name = "vreg_l18a_1p2"; >> + regulator-min-microvolt = <312000>; >> + regulator-max-microvolt = <1304000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + }; >> +}; >> + >> +&qupv3_id_0 { >> + status = "okay"; >> +}; >> + >> +&uart7 { >> + status = "okay"; >> +}; >> diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts >> new file mode 100644 >> index 000000000000..42eb0c33e7ba >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts >> @@ -0,0 +1,266 @@ >> +// SPDX-License-Identifier: BSD-3-Clause >> +/* >> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. >> + */ >> + >> +/dts-v1/; >> + >> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> >> +#include "qru1000.dtsi" >> +#include "pm8150.dtsi" >> + >> +/ { >> + model = "Qualcomm Technologies, Inc. QRU1000 IDP"; >> + compatible = "qcom,qru1000-idp", "qcom,qru1000"; >> + >> + aliases { >> + serial0 = &uart7; >> + }; >> + >> + clocks { >> + xo_board: xo-board { >> + compatible = "fixed-clock"; >> + clock-frequency = <19200000>; >> + clock-output-names = "xo_board"; >> + #clock-cells = <0>; >> + }; >> + >> + sleep_clk: sleep-clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <32000>; >> + #clock-cells = <0>; >> + }; >> + >> + pcie_0_pipe_clk: pcie-0-pipe-clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <1000>; >> + clock-output-names = "pcie_0_pipe_clk"; >> + #clock-cells = <0>; >> + }; >> + >> + pcie_0_phy_aux_clk: pcie-0-phy-aux-clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <1000>; >> + clock-output-names = "pcie_0_phy_aux_clk"; >> + #clock-cells = <0>; >> + }; >> + >> + usb3_phy_wrapper_pipe_clk: usb3-phy-wrapper-pipe-clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <1000>; >> + clock-output-names = "usb3_phy_wrapper_pipe_clk"; >> + #clock-cells = <0>; >> + }; >> + }; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> + >> + ppvar_sys: ppvar-sys-regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "ppvar_sys"; >> + regulator-always-on; >> + regulator-boot-on; >> + }; >> + >> + vph_pwr: vph-pwr-regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "vph_pwr"; >> + regulator-min-microvolt = <3700000>; >> + regulator-max-microvolt = <3700000>; >> + >> + regulator-always-on; >> + regulator-boot-on; >> + >> + vin-supply = <&ppvar_sys>; >> + }; >> +}; >> + >> +&apps_rsc { >> + regulators { >> + compatible = "qcom,pm8150-rpmh-regulators"; >> + qcom,pmic-id = "a"; >> + >> + vdd-s1-supply = <&vph_pwr>; >> + vdd-s2-supply = <&vph_pwr>; >> + vdd-s3-supply = <&vph_pwr>; >> + vdd-s4-supply = <&vph_pwr>; >> + vdd-s5-supply = <&vph_pwr>; >> + vdd-s6-supply = <&vph_pwr>; >> + vdd-s7-supply = <&vph_pwr>; >> + vdd-s8-supply = <&vph_pwr>; >> + vdd-s9-supply = <&vph_pwr>; >> + vdd-s10-supply = <&vph_pwr>; >> + >> + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; >> + vdd-l2-l10-supply = <&vph_pwr>; >> + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>; >> + vdd-l6-l9-supply = <&vreg_s6a_0p9>; >> + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>; >> + vdd-l13-l16-l17-supply = <&vph_pwr>; >> + >> + vreg_s2a_0p5: smps2 { >> + regulator-name = "vreg_s2a_0p5"; >> + regulator-min-microvolt = <320000>; >> + regulator-max-microvolt = <570000>; >> + }; >> + >> + vreg_s3a_1p05: smps3 { >> + regulator-name = "vreg_s3a_1p05"; >> + regulator-min-microvolt = <950000>; >> + regulator-max-microvolt = <1170000>; >> + }; >> + >> + vreg_s4a_1p8: smps4 { >> + regulator-name = "vreg_s4a_1p8"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + }; >> + >> + vreg_s5a_2p0: smps5 { >> + regulator-name = "vreg_s5a_2p0"; >> + regulator-min-microvolt = <1904000>; >> + regulator-max-microvolt = <2000000>; >> + }; >> + >> + vreg_s6a_0p9: smps6 { >> + regulator-name = "vreg_s6a_0p9"; >> + regulator-min-microvolt = <920000>; >> + regulator-max-microvolt = <1128000>; >> + }; >> + >> + vreg_s7a_1p2: smps7 { >> + regulator-name = "vreg_s7a_1p2"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1200000>; >> + }; >> + >> + vreg_s8a_1p3: smps8 { >> + regulator-name = "vreg_s8a_1p3"; >> + regulator-min-microvolt = <1352000>; >> + regulator-max-microvolt = <1352000>; >> + }; >> + >> + vreg_l1a_0p91: ldo1 { >> + regulator-name = "vreg_l1a_0p91"; >> + regulator-min-microvolt = <312000>; >> + regulator-max-microvolt = <1304000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l2a_2p3: ldo2 { >> + regulator-name = "vreg_l2a_2p3"; >> + regulator-min-microvolt = <2970000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l3a_1p2: ldo3 { >> + regulator-name = "vreg_l3a_1p2"; >> + regulator-min-microvolt = <920000>; >> + regulator-max-microvolt = <1260000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l5a_0p8: ldo5 { >> + regulator-name = "vreg_l5a_0p8"; >> + regulator-min-microvolt = <312000>; >> + regulator-max-microvolt = <1304000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l6a_0p91: ldo6 { >> + regulator-name = "vreg_l6a_0p91"; >> + regulator-min-microvolt = <880000>; >> + regulator-max-microvolt = <950000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l7a_1p8: ldo7 { >> + regulator-name = "vreg_l7a_1p8"; >> + regulator-min-microvolt = <1650000>; >> + regulator-max-microvolt = <2000000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + >> + }; >> + >> + vreg_l8a_0p91: ldo8 { >> + regulator-name = "vreg_l8a_0p91"; >> + regulator-min-microvolt = <888000>; >> + regulator-max-microvolt = <925000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l9a_0p91: ldo9 { >> + regulator-name = "vreg_l8a_0p91"; >> + regulator-min-microvolt = <312000>; >> + regulator-max-microvolt = <1304000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l10a_2p95: ldo10 { >> + regulator-name = "vreg_l10a_2p95"; >> + regulator-min-microvolt = <2700000>; >> + regulator-max-microvolt = <3544000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l11a_0p91: ldo11 { >> + regulator-name = "vreg_l11a_0p91"; >> + regulator-min-microvolt = <800000>; >> + regulator-max-microvolt = <1000000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l12a_1p8: ldo12 { >> + regulator-name = "vreg_l12a_1p8"; >> + regulator-min-microvolt = <1504000>; >> + regulator-max-microvolt = <1504000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l14a_1p8: ldo14 { >> + regulator-name = "vreg_l14a_1p8"; >> + regulator-min-microvolt = <1650000>; >> + regulator-max-microvolt = <1950000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l15a_1p8: ldo15 { >> + regulator-name = "vreg_l15a_1p8"; >> + regulator-min-microvolt = <1504000>; >> + regulator-max-microvolt = <2000000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l16a_1p8: ldo16 { >> + regulator-name = "vreg_l16a_1p8"; >> + regulator-min-microvolt = <1710000>; >> + regulator-max-microvolt = <1890000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l17a_3p3: ldo17 { >> + regulator-name = "vreg_l17a_3p3"; >> + regulator-min-microvolt = <3000000>; >> + regulator-max-microvolt = <3544000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l18a_1p2: ldo18 { >> + regulator-name = "vreg_l18a_1p2"; >> + regulator-min-microvolt = <312000>; >> + regulator-max-microvolt = <1304000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + }; >> +}; >> + >> +&qupv3_id_0 { >> + status = "okay"; >> +}; >> + >> +&uart7 { >> + status = "okay"; >> +};
On 21.11.2022 23:15, Melody Olvera wrote: > > > On 11/21/2022 5:07 AM, Konrad Dybcio wrote: >> >> On 18.11.2022 20:22, Melody Olvera wrote: >>> Add DTs for Qualcomm IDP platforms using the QDU1000 and QRU1000 >>> SoCs. >>> >>> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> >>> --- >>> arch/arm64/boot/dts/qcom/Makefile | 2 + >>> arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 266 +++++++++++++++++++++++ >>> arch/arm64/boot/dts/qcom/qru1000-idp.dts | 266 +++++++++++++++++++++++ >>> 3 files changed, 534 insertions(+) >>> create mode 100644 arch/arm64/boot/dts/qcom/qdu1000-idp.dts >>> create mode 100644 arch/arm64/boot/dts/qcom/qru1000-idp.dts >>> >>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >>> index afe496a93f94..da66d4a0a884 100644 >>> --- a/arch/arm64/boot/dts/qcom/Makefile >>> +++ b/arch/arm64/boot/dts/qcom/Makefile >>> @@ -53,7 +53,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb >>> +dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb >>> +dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb >>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts >>> new file mode 100644 >>> index 000000000000..5aed483201fa >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts >>> @@ -0,0 +1,266 @@ >>> +// SPDX-License-Identifier: BSD-3-Clause >>> +/* >>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. >>> + */ >>> + >>> +/dts-v1/; >>> + >>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> >>> +#include "qdu1000.dtsi" >>> +#include "pm8150.dtsi" >>> + >>> +/ { >>> + model = "Qualcomm Technologies, Inc. QDU1000 IDP"; >>> + compatible = "qcom,qdu1000-idp", "qcom,qdu1000"; >> Missing chassis-type > > Sorry, not sure what you mean here... Do you mean like QRD, HDK, MTP, etc.? > If so, then IDP is the chassis type. It's a way to describe the type of the board, you probably want "embedded" here. Check page 30 of the PDF here: https://buildmedia.readthedocs.org/media/pdf/devicetree-specification/latest/devicetree-specification.pdf Konrad > >> >>> + >>> + aliases { >>> + serial0 = &uart7; >>> + }; >>> + >>> + clocks { >>> + xo_board: xo-board { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <19200000>; >>> + clock-output-names = "xo_board"; >>> + #clock-cells = <0>; >>> + }; >>> + >>> + sleep_clk: sleep-clk { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <32000>; >>> + #clock-cells = <0>; >>> + }; >>> + >>> + pcie_0_pipe_clk: pcie-0-pipe-clk { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <1000>; >>> + clock-output-names = "pcie_0_pipe_clk"; >>> + #clock-cells = <0>; >>> + }; >>> + >>> + pcie_0_phy_aux_clk: pcie-0-phy-aux-clk { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <1000>; >>> + clock-output-names = "pcie_0_phy_aux_clk"; >>> + #clock-cells = <0>; >>> + }; >>> + >>> + usb3_phy_wrapper_pipe_clk: usb3-phy-wrapper-pipe-clk { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <1000>; >>> + clock-output-names = "usb3_phy_wrapper_pipe_clk"; >>> + #clock-cells = <0>; >>> + }; >> Do these pipe clocks not come from QMPPHY? > > Yes they do; I just don't have those phys ready yet. I can put a TODO here to > move them if necessary. > >> >>> + }; >>> + >>> + chosen { >>> + stdout-path = "serial0:115200n8"; >>> + }; >>> + >>> + ppvar_sys: ppvar-sys-regulator { >>> + compatible = "regulator-fixed"; >>> + regulator-name = "ppvar_sys"; >> Any chance you could add the voltage of this regulator here, >> so the DT can better represent the hardware? > > Sure. > > Thanks, > Melody >> Konrad >>> + regulator-always-on; >>> + regulator-boot-on; >>> + }; >>> + >>> + vph_pwr: vph-pwr-regulator { >>> + compatible = "regulator-fixed"; >>> + regulator-name = "vph_pwr"; >>> + regulator-min-microvolt = <3700000>; >>> + regulator-max-microvolt = <3700000>; >>> + >>> + regulator-always-on; >>> + regulator-boot-on; >>> + >>> + vin-supply = <&ppvar_sys>; >>> + }; >>> +}; >>> + >>> +&apps_rsc { >>> + regulators { >>> + compatible = "qcom,pm8150-rpmh-regulators"; >>> + qcom,pmic-id = "a"; >>> + >>> + vdd-s1-supply = <&vph_pwr>; >>> + vdd-s2-supply = <&vph_pwr>; >>> + vdd-s3-supply = <&vph_pwr>; >>> + vdd-s4-supply = <&vph_pwr>; >>> + vdd-s5-supply = <&vph_pwr>; >>> + vdd-s6-supply = <&vph_pwr>; >>> + vdd-s7-supply = <&vph_pwr>; >>> + vdd-s8-supply = <&vph_pwr>; >>> + vdd-s9-supply = <&vph_pwr>; >>> + vdd-s10-supply = <&vph_pwr>; >>> + >>> + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; >>> + vdd-l2-l10-supply = <&vph_pwr>; >>> + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>; >>> + vdd-l6-l9-supply = <&vreg_s6a_0p9>; >>> + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>; >>> + vdd-l13-l16-l17-supply = <&vph_pwr>; >>> + >>> + vreg_s2a_0p5: smps2 { >>> + regulator-name = "vreg_s2a_0p5"; >>> + regulator-min-microvolt = <320000>; >>> + regulator-max-microvolt = <570000>; >>> + }; >>> + >>> + vreg_s3a_1p05: smps3 { >>> + regulator-name = "vreg_s3a_1p05"; >>> + regulator-min-microvolt = <950000>; >>> + regulator-max-microvolt = <1170000>; >>> + }; >>> + >>> + vreg_s4a_1p8: smps4 { >>> + regulator-name = "vreg_s4a_1p8"; >>> + regulator-min-microvolt = <1800000>; >>> + regulator-max-microvolt = <1800000>; >>> + }; >>> + >>> + vreg_s5a_2p0: smps5 { >>> + regulator-name = "vreg_s5a_2p0"; >>> + regulator-min-microvolt = <1904000>; >>> + regulator-max-microvolt = <2000000>; >>> + }; >>> + >>> + vreg_s6a_0p9: smps6 { >>> + regulator-name = "vreg_s6a_0p9"; >>> + regulator-min-microvolt = <920000>; >>> + regulator-max-microvolt = <1128000>; >>> + }; >>> + >>> + vreg_s7a_1p2: smps7 { >>> + regulator-name = "vreg_s7a_1p2"; >>> + regulator-min-microvolt = <1200000>; >>> + regulator-max-microvolt = <1200000>; >>> + }; >>> + >>> + vreg_s8a_1p3: smps8 { >>> + regulator-name = "vreg_s8a_1p3"; >>> + regulator-min-microvolt = <1352000>; >>> + regulator-max-microvolt = <1352000>; >>> + }; >>> + >>> + vreg_l1a_0p91: ldo1 { >>> + regulator-name = "vreg_l1a_0p91"; >>> + regulator-min-microvolt = <312000>; >>> + regulator-max-microvolt = <1304000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l2a_2p3: ldo2 { >>> + regulator-name = "vreg_l2a_2p3"; >>> + regulator-min-microvolt = <2970000>; >>> + regulator-max-microvolt = <3300000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l3a_1p2: ldo3 { >>> + regulator-name = "vreg_l3a_1p2"; >>> + regulator-min-microvolt = <920000>; >>> + regulator-max-microvolt = <1260000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l5a_0p8: ldo5 { >>> + regulator-name = "vreg_l5a_0p8"; >>> + regulator-min-microvolt = <312000>; >>> + regulator-max-microvolt = <1304000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l6a_0p91: ldo6 { >>> + regulator-name = "vreg_l6a_0p91"; >>> + regulator-min-microvolt = <880000>; >>> + regulator-max-microvolt = <950000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l7a_1p8: ldo7 { >>> + regulator-name = "vreg_l7a_1p8"; >>> + regulator-min-microvolt = <1650000>; >>> + regulator-max-microvolt = <2000000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + >>> + }; >>> + >>> + vreg_l8a_0p91: ldo8 { >>> + regulator-name = "vreg_l8a_0p91"; >>> + regulator-min-microvolt = <888000>; >>> + regulator-max-microvolt = <925000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l9a_0p91: ldo9 { >>> + regulator-name = "vreg_l8a_0p91"; >>> + regulator-min-microvolt = <312000>; >>> + regulator-max-microvolt = <1304000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l10a_2p95: ldo10 { >>> + regulator-name = "vreg_l10a_2p95"; >>> + regulator-min-microvolt = <2700000>; >>> + regulator-max-microvolt = <3544000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l11a_0p91: ldo11 { >>> + regulator-name = "vreg_l11a_0p91"; >>> + regulator-min-microvolt = <800000>; >>> + regulator-max-microvolt = <1000000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l12a_1p8: ldo12 { >>> + regulator-name = "vreg_l12a_1p8"; >>> + regulator-min-microvolt = <1504000>; >>> + regulator-max-microvolt = <1504000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l14a_1p8: ldo14 { >>> + regulator-name = "vreg_l14a_1p8"; >>> + regulator-min-microvolt = <1650000>; >>> + regulator-max-microvolt = <1950000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l15a_1p8: ldo15 { >>> + regulator-name = "vreg_l15a_1p8"; >>> + regulator-min-microvolt = <1504000>; >>> + regulator-max-microvolt = <2000000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l16a_1p8: ldo16 { >>> + regulator-name = "vreg_l16a_1p8"; >>> + regulator-min-microvolt = <1710000>; >>> + regulator-max-microvolt = <1890000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l17a_3p3: ldo17 { >>> + regulator-name = "vreg_l17a_3p3"; >>> + regulator-min-microvolt = <3000000>; >>> + regulator-max-microvolt = <3544000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l18a_1p2: ldo18 { >>> + regulator-name = "vreg_l18a_1p2"; >>> + regulator-min-microvolt = <312000>; >>> + regulator-max-microvolt = <1304000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + }; >>> +}; >>> + >>> +&qupv3_id_0 { >>> + status = "okay"; >>> +}; >>> + >>> +&uart7 { >>> + status = "okay"; >>> +}; >>> diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts >>> new file mode 100644 >>> index 000000000000..42eb0c33e7ba >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts >>> @@ -0,0 +1,266 @@ >>> +// SPDX-License-Identifier: BSD-3-Clause >>> +/* >>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. >>> + */ >>> + >>> +/dts-v1/; >>> + >>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> >>> +#include "qru1000.dtsi" >>> +#include "pm8150.dtsi" >>> + >>> +/ { >>> + model = "Qualcomm Technologies, Inc. QRU1000 IDP"; >>> + compatible = "qcom,qru1000-idp", "qcom,qru1000"; >>> + >>> + aliases { >>> + serial0 = &uart7; >>> + }; >>> + >>> + clocks { >>> + xo_board: xo-board { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <19200000>; >>> + clock-output-names = "xo_board"; >>> + #clock-cells = <0>; >>> + }; >>> + >>> + sleep_clk: sleep-clk { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <32000>; >>> + #clock-cells = <0>; >>> + }; >>> + >>> + pcie_0_pipe_clk: pcie-0-pipe-clk { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <1000>; >>> + clock-output-names = "pcie_0_pipe_clk"; >>> + #clock-cells = <0>; >>> + }; >>> + >>> + pcie_0_phy_aux_clk: pcie-0-phy-aux-clk { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <1000>; >>> + clock-output-names = "pcie_0_phy_aux_clk"; >>> + #clock-cells = <0>; >>> + }; >>> + >>> + usb3_phy_wrapper_pipe_clk: usb3-phy-wrapper-pipe-clk { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <1000>; >>> + clock-output-names = "usb3_phy_wrapper_pipe_clk"; >>> + #clock-cells = <0>; >>> + }; >>> + }; >>> + >>> + chosen { >>> + stdout-path = "serial0:115200n8"; >>> + }; >>> + >>> + ppvar_sys: ppvar-sys-regulator { >>> + compatible = "regulator-fixed"; >>> + regulator-name = "ppvar_sys"; >>> + regulator-always-on; >>> + regulator-boot-on; >>> + }; >>> + >>> + vph_pwr: vph-pwr-regulator { >>> + compatible = "regulator-fixed"; >>> + regulator-name = "vph_pwr"; >>> + regulator-min-microvolt = <3700000>; >>> + regulator-max-microvolt = <3700000>; >>> + >>> + regulator-always-on; >>> + regulator-boot-on; >>> + >>> + vin-supply = <&ppvar_sys>; >>> + }; >>> +}; >>> + >>> +&apps_rsc { >>> + regulators { >>> + compatible = "qcom,pm8150-rpmh-regulators"; >>> + qcom,pmic-id = "a"; >>> + >>> + vdd-s1-supply = <&vph_pwr>; >>> + vdd-s2-supply = <&vph_pwr>; >>> + vdd-s3-supply = <&vph_pwr>; >>> + vdd-s4-supply = <&vph_pwr>; >>> + vdd-s5-supply = <&vph_pwr>; >>> + vdd-s6-supply = <&vph_pwr>; >>> + vdd-s7-supply = <&vph_pwr>; >>> + vdd-s8-supply = <&vph_pwr>; >>> + vdd-s9-supply = <&vph_pwr>; >>> + vdd-s10-supply = <&vph_pwr>; >>> + >>> + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; >>> + vdd-l2-l10-supply = <&vph_pwr>; >>> + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>; >>> + vdd-l6-l9-supply = <&vreg_s6a_0p9>; >>> + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>; >>> + vdd-l13-l16-l17-supply = <&vph_pwr>; >>> + >>> + vreg_s2a_0p5: smps2 { >>> + regulator-name = "vreg_s2a_0p5"; >>> + regulator-min-microvolt = <320000>; >>> + regulator-max-microvolt = <570000>; >>> + }; >>> + >>> + vreg_s3a_1p05: smps3 { >>> + regulator-name = "vreg_s3a_1p05"; >>> + regulator-min-microvolt = <950000>; >>> + regulator-max-microvolt = <1170000>; >>> + }; >>> + >>> + vreg_s4a_1p8: smps4 { >>> + regulator-name = "vreg_s4a_1p8"; >>> + regulator-min-microvolt = <1800000>; >>> + regulator-max-microvolt = <1800000>; >>> + }; >>> + >>> + vreg_s5a_2p0: smps5 { >>> + regulator-name = "vreg_s5a_2p0"; >>> + regulator-min-microvolt = <1904000>; >>> + regulator-max-microvolt = <2000000>; >>> + }; >>> + >>> + vreg_s6a_0p9: smps6 { >>> + regulator-name = "vreg_s6a_0p9"; >>> + regulator-min-microvolt = <920000>; >>> + regulator-max-microvolt = <1128000>; >>> + }; >>> + >>> + vreg_s7a_1p2: smps7 { >>> + regulator-name = "vreg_s7a_1p2"; >>> + regulator-min-microvolt = <1200000>; >>> + regulator-max-microvolt = <1200000>; >>> + }; >>> + >>> + vreg_s8a_1p3: smps8 { >>> + regulator-name = "vreg_s8a_1p3"; >>> + regulator-min-microvolt = <1352000>; >>> + regulator-max-microvolt = <1352000>; >>> + }; >>> + >>> + vreg_l1a_0p91: ldo1 { >>> + regulator-name = "vreg_l1a_0p91"; >>> + regulator-min-microvolt = <312000>; >>> + regulator-max-microvolt = <1304000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l2a_2p3: ldo2 { >>> + regulator-name = "vreg_l2a_2p3"; >>> + regulator-min-microvolt = <2970000>; >>> + regulator-max-microvolt = <3300000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l3a_1p2: ldo3 { >>> + regulator-name = "vreg_l3a_1p2"; >>> + regulator-min-microvolt = <920000>; >>> + regulator-max-microvolt = <1260000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l5a_0p8: ldo5 { >>> + regulator-name = "vreg_l5a_0p8"; >>> + regulator-min-microvolt = <312000>; >>> + regulator-max-microvolt = <1304000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l6a_0p91: ldo6 { >>> + regulator-name = "vreg_l6a_0p91"; >>> + regulator-min-microvolt = <880000>; >>> + regulator-max-microvolt = <950000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l7a_1p8: ldo7 { >>> + regulator-name = "vreg_l7a_1p8"; >>> + regulator-min-microvolt = <1650000>; >>> + regulator-max-microvolt = <2000000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + >>> + }; >>> + >>> + vreg_l8a_0p91: ldo8 { >>> + regulator-name = "vreg_l8a_0p91"; >>> + regulator-min-microvolt = <888000>; >>> + regulator-max-microvolt = <925000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l9a_0p91: ldo9 { >>> + regulator-name = "vreg_l8a_0p91"; >>> + regulator-min-microvolt = <312000>; >>> + regulator-max-microvolt = <1304000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l10a_2p95: ldo10 { >>> + regulator-name = "vreg_l10a_2p95"; >>> + regulator-min-microvolt = <2700000>; >>> + regulator-max-microvolt = <3544000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l11a_0p91: ldo11 { >>> + regulator-name = "vreg_l11a_0p91"; >>> + regulator-min-microvolt = <800000>; >>> + regulator-max-microvolt = <1000000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l12a_1p8: ldo12 { >>> + regulator-name = "vreg_l12a_1p8"; >>> + regulator-min-microvolt = <1504000>; >>> + regulator-max-microvolt = <1504000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l14a_1p8: ldo14 { >>> + regulator-name = "vreg_l14a_1p8"; >>> + regulator-min-microvolt = <1650000>; >>> + regulator-max-microvolt = <1950000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l15a_1p8: ldo15 { >>> + regulator-name = "vreg_l15a_1p8"; >>> + regulator-min-microvolt = <1504000>; >>> + regulator-max-microvolt = <2000000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l16a_1p8: ldo16 { >>> + regulator-name = "vreg_l16a_1p8"; >>> + regulator-min-microvolt = <1710000>; >>> + regulator-max-microvolt = <1890000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l17a_3p3: ldo17 { >>> + regulator-name = "vreg_l17a_3p3"; >>> + regulator-min-microvolt = <3000000>; >>> + regulator-max-microvolt = <3544000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + >>> + vreg_l18a_1p2: ldo18 { >>> + regulator-name = "vreg_l18a_1p2"; >>> + regulator-min-microvolt = <312000>; >>> + regulator-max-microvolt = <1304000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>> + }; >>> + }; >>> +}; >>> + >>> +&qupv3_id_0 { >>> + status = "okay"; >>> +}; >>> + >>> +&uart7 { >>> + status = "okay"; >>> +}; >
On 11/21/2022 4:18 PM, Konrad Dybcio wrote: > > On 21.11.2022 23:15, Melody Olvera wrote: >> >> On 11/21/2022 5:07 AM, Konrad Dybcio wrote: >>> On 18.11.2022 20:22, Melody Olvera wrote: >>>> Add DTs for Qualcomm IDP platforms using the QDU1000 and QRU1000 >>>> SoCs. >>>> >>>> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> >>>> --- >>>> arch/arm64/boot/dts/qcom/Makefile | 2 + >>>> arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 266 +++++++++++++++++++++++ >>>> arch/arm64/boot/dts/qcom/qru1000-idp.dts | 266 +++++++++++++++++++++++ >>>> 3 files changed, 534 insertions(+) >>>> create mode 100644 arch/arm64/boot/dts/qcom/qdu1000-idp.dts >>>> create mode 100644 arch/arm64/boot/dts/qcom/qru1000-idp.dts >>>> >>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >>>> index afe496a93f94..da66d4a0a884 100644 >>>> --- a/arch/arm64/boot/dts/qcom/Makefile >>>> +++ b/arch/arm64/boot/dts/qcom/Makefile >>>> @@ -53,7 +53,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb >>>> dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb >>>> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb >>>> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb >>>> +dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb >>>> dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb >>>> +dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb >>>> dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb >>>> dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb >>>> dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb >>>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts >>>> new file mode 100644 >>>> index 000000000000..5aed483201fa >>>> --- /dev/null >>>> +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts >>>> @@ -0,0 +1,266 @@ >>>> +// SPDX-License-Identifier: BSD-3-Clause >>>> +/* >>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. >>>> + */ >>>> + >>>> +/dts-v1/; >>>> + >>>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> >>>> +#include "qdu1000.dtsi" >>>> +#include "pm8150.dtsi" >>>> + >>>> +/ { >>>> + model = "Qualcomm Technologies, Inc. QDU1000 IDP"; >>>> + compatible = "qcom,qdu1000-idp", "qcom,qdu1000"; >>> Missing chassis-type >> Sorry, not sure what you mean here... Do you mean like QRD, HDK, MTP, etc.? >> If so, then IDP is the chassis type. > It's a way to describe the type of the board, you probably want "embedded" here. > > Check page 30 of the PDF here: > > https://buildmedia.readthedocs.org/media/pdf/devicetree-specification/latest/devicetree-specification.pdf Ah, ok; thanks so much. Yeah embedded is the way to go. Thanks, Melody > > Konrad >>>> + >>>> + aliases { >>>> + serial0 = &uart7; >>>> + }; >>>> + >>>> + clocks { >>>> + xo_board: xo-board { >>>> + compatible = "fixed-clock"; >>>> + clock-frequency = <19200000>; >>>> + clock-output-names = "xo_board"; >>>> + #clock-cells = <0>; >>>> + }; >>>> + >>>> + sleep_clk: sleep-clk { >>>> + compatible = "fixed-clock"; >>>> + clock-frequency = <32000>; >>>> + #clock-cells = <0>; >>>> + }; >>>> + >>>> + pcie_0_pipe_clk: pcie-0-pipe-clk { >>>> + compatible = "fixed-clock"; >>>> + clock-frequency = <1000>; >>>> + clock-output-names = "pcie_0_pipe_clk"; >>>> + #clock-cells = <0>; >>>> + }; >>>> + >>>> + pcie_0_phy_aux_clk: pcie-0-phy-aux-clk { >>>> + compatible = "fixed-clock"; >>>> + clock-frequency = <1000>; >>>> + clock-output-names = "pcie_0_phy_aux_clk"; >>>> + #clock-cells = <0>; >>>> + }; >>>> + >>>> + usb3_phy_wrapper_pipe_clk: usb3-phy-wrapper-pipe-clk { >>>> + compatible = "fixed-clock"; >>>> + clock-frequency = <1000>; >>>> + clock-output-names = "usb3_phy_wrapper_pipe_clk"; >>>> + #clock-cells = <0>; >>>> + }; >>> Do these pipe clocks not come from QMPPHY? >> Yes they do; I just don't have those phys ready yet. I can put a TODO here to >> move them if necessary. >> >>>> + }; >>>> + >>>> + chosen { >>>> + stdout-path = "serial0:115200n8"; >>>> + }; >>>> + >>>> + ppvar_sys: ppvar-sys-regulator { >>>> + compatible = "regulator-fixed"; >>>> + regulator-name = "ppvar_sys"; >>> Any chance you could add the voltage of this regulator here, >>> so the DT can better represent the hardware? >> Sure. >> >> Thanks, >> Melody >>> Konrad >>>> + regulator-always-on; >>>> + regulator-boot-on; >>>> + }; >>>> + >>>> + vph_pwr: vph-pwr-regulator { >>>> + compatible = "regulator-fixed"; >>>> + regulator-name = "vph_pwr"; >>>> + regulator-min-microvolt = <3700000>; >>>> + regulator-max-microvolt = <3700000>; >>>> + >>>> + regulator-always-on; >>>> + regulator-boot-on; >>>> + >>>> + vin-supply = <&ppvar_sys>; >>>> + }; >>>> +}; >>>> + >>>> +&apps_rsc { >>>> + regulators { >>>> + compatible = "qcom,pm8150-rpmh-regulators"; >>>> + qcom,pmic-id = "a"; >>>> + >>>> + vdd-s1-supply = <&vph_pwr>; >>>> + vdd-s2-supply = <&vph_pwr>; >>>> + vdd-s3-supply = <&vph_pwr>; >>>> + vdd-s4-supply = <&vph_pwr>; >>>> + vdd-s5-supply = <&vph_pwr>; >>>> + vdd-s6-supply = <&vph_pwr>; >>>> + vdd-s7-supply = <&vph_pwr>; >>>> + vdd-s8-supply = <&vph_pwr>; >>>> + vdd-s9-supply = <&vph_pwr>; >>>> + vdd-s10-supply = <&vph_pwr>; >>>> + >>>> + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; >>>> + vdd-l2-l10-supply = <&vph_pwr>; >>>> + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>; >>>> + vdd-l6-l9-supply = <&vreg_s6a_0p9>; >>>> + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>; >>>> + vdd-l13-l16-l17-supply = <&vph_pwr>; >>>> + >>>> + vreg_s2a_0p5: smps2 { >>>> + regulator-name = "vreg_s2a_0p5"; >>>> + regulator-min-microvolt = <320000>; >>>> + regulator-max-microvolt = <570000>; >>>> + }; >>>> + >>>> + vreg_s3a_1p05: smps3 { >>>> + regulator-name = "vreg_s3a_1p05"; >>>> + regulator-min-microvolt = <950000>; >>>> + regulator-max-microvolt = <1170000>; >>>> + }; >>>> + >>>> + vreg_s4a_1p8: smps4 { >>>> + regulator-name = "vreg_s4a_1p8"; >>>> + regulator-min-microvolt = <1800000>; >>>> + regulator-max-microvolt = <1800000>; >>>> + }; >>>> + >>>> + vreg_s5a_2p0: smps5 { >>>> + regulator-name = "vreg_s5a_2p0"; >>>> + regulator-min-microvolt = <1904000>; >>>> + regulator-max-microvolt = <2000000>; >>>> + }; >>>> + >>>> + vreg_s6a_0p9: smps6 { >>>> + regulator-name = "vreg_s6a_0p9"; >>>> + regulator-min-microvolt = <920000>; >>>> + regulator-max-microvolt = <1128000>; >>>> + }; >>>> + >>>> + vreg_s7a_1p2: smps7 { >>>> + regulator-name = "vreg_s7a_1p2"; >>>> + regulator-min-microvolt = <1200000>; >>>> + regulator-max-microvolt = <1200000>; >>>> + }; >>>> + >>>> + vreg_s8a_1p3: smps8 { >>>> + regulator-name = "vreg_s8a_1p3"; >>>> + regulator-min-microvolt = <1352000>; >>>> + regulator-max-microvolt = <1352000>; >>>> + }; >>>> + >>>> + vreg_l1a_0p91: ldo1 { >>>> + regulator-name = "vreg_l1a_0p91"; >>>> + regulator-min-microvolt = <312000>; >>>> + regulator-max-microvolt = <1304000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l2a_2p3: ldo2 { >>>> + regulator-name = "vreg_l2a_2p3"; >>>> + regulator-min-microvolt = <2970000>; >>>> + regulator-max-microvolt = <3300000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l3a_1p2: ldo3 { >>>> + regulator-name = "vreg_l3a_1p2"; >>>> + regulator-min-microvolt = <920000>; >>>> + regulator-max-microvolt = <1260000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l5a_0p8: ldo5 { >>>> + regulator-name = "vreg_l5a_0p8"; >>>> + regulator-min-microvolt = <312000>; >>>> + regulator-max-microvolt = <1304000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l6a_0p91: ldo6 { >>>> + regulator-name = "vreg_l6a_0p91"; >>>> + regulator-min-microvolt = <880000>; >>>> + regulator-max-microvolt = <950000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l7a_1p8: ldo7 { >>>> + regulator-name = "vreg_l7a_1p8"; >>>> + regulator-min-microvolt = <1650000>; >>>> + regulator-max-microvolt = <2000000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + >>>> + }; >>>> + >>>> + vreg_l8a_0p91: ldo8 { >>>> + regulator-name = "vreg_l8a_0p91"; >>>> + regulator-min-microvolt = <888000>; >>>> + regulator-max-microvolt = <925000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l9a_0p91: ldo9 { >>>> + regulator-name = "vreg_l8a_0p91"; >>>> + regulator-min-microvolt = <312000>; >>>> + regulator-max-microvolt = <1304000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l10a_2p95: ldo10 { >>>> + regulator-name = "vreg_l10a_2p95"; >>>> + regulator-min-microvolt = <2700000>; >>>> + regulator-max-microvolt = <3544000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l11a_0p91: ldo11 { >>>> + regulator-name = "vreg_l11a_0p91"; >>>> + regulator-min-microvolt = <800000>; >>>> + regulator-max-microvolt = <1000000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l12a_1p8: ldo12 { >>>> + regulator-name = "vreg_l12a_1p8"; >>>> + regulator-min-microvolt = <1504000>; >>>> + regulator-max-microvolt = <1504000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l14a_1p8: ldo14 { >>>> + regulator-name = "vreg_l14a_1p8"; >>>> + regulator-min-microvolt = <1650000>; >>>> + regulator-max-microvolt = <1950000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l15a_1p8: ldo15 { >>>> + regulator-name = "vreg_l15a_1p8"; >>>> + regulator-min-microvolt = <1504000>; >>>> + regulator-max-microvolt = <2000000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l16a_1p8: ldo16 { >>>> + regulator-name = "vreg_l16a_1p8"; >>>> + regulator-min-microvolt = <1710000>; >>>> + regulator-max-microvolt = <1890000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l17a_3p3: ldo17 { >>>> + regulator-name = "vreg_l17a_3p3"; >>>> + regulator-min-microvolt = <3000000>; >>>> + regulator-max-microvolt = <3544000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l18a_1p2: ldo18 { >>>> + regulator-name = "vreg_l18a_1p2"; >>>> + regulator-min-microvolt = <312000>; >>>> + regulator-max-microvolt = <1304000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + }; >>>> +}; >>>> + >>>> +&qupv3_id_0 { >>>> + status = "okay"; >>>> +}; >>>> + >>>> +&uart7 { >>>> + status = "okay"; >>>> +}; >>>> diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts >>>> new file mode 100644 >>>> index 000000000000..42eb0c33e7ba >>>> --- /dev/null >>>> +++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts >>>> @@ -0,0 +1,266 @@ >>>> +// SPDX-License-Identifier: BSD-3-Clause >>>> +/* >>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. >>>> + */ >>>> + >>>> +/dts-v1/; >>>> + >>>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> >>>> +#include "qru1000.dtsi" >>>> +#include "pm8150.dtsi" >>>> + >>>> +/ { >>>> + model = "Qualcomm Technologies, Inc. QRU1000 IDP"; >>>> + compatible = "qcom,qru1000-idp", "qcom,qru1000"; >>>> + >>>> + aliases { >>>> + serial0 = &uart7; >>>> + }; >>>> + >>>> + clocks { >>>> + xo_board: xo-board { >>>> + compatible = "fixed-clock"; >>>> + clock-frequency = <19200000>; >>>> + clock-output-names = "xo_board"; >>>> + #clock-cells = <0>; >>>> + }; >>>> + >>>> + sleep_clk: sleep-clk { >>>> + compatible = "fixed-clock"; >>>> + clock-frequency = <32000>; >>>> + #clock-cells = <0>; >>>> + }; >>>> + >>>> + pcie_0_pipe_clk: pcie-0-pipe-clk { >>>> + compatible = "fixed-clock"; >>>> + clock-frequency = <1000>; >>>> + clock-output-names = "pcie_0_pipe_clk"; >>>> + #clock-cells = <0>; >>>> + }; >>>> + >>>> + pcie_0_phy_aux_clk: pcie-0-phy-aux-clk { >>>> + compatible = "fixed-clock"; >>>> + clock-frequency = <1000>; >>>> + clock-output-names = "pcie_0_phy_aux_clk"; >>>> + #clock-cells = <0>; >>>> + }; >>>> + >>>> + usb3_phy_wrapper_pipe_clk: usb3-phy-wrapper-pipe-clk { >>>> + compatible = "fixed-clock"; >>>> + clock-frequency = <1000>; >>>> + clock-output-names = "usb3_phy_wrapper_pipe_clk"; >>>> + #clock-cells = <0>; >>>> + }; >>>> + }; >>>> + >>>> + chosen { >>>> + stdout-path = "serial0:115200n8"; >>>> + }; >>>> + >>>> + ppvar_sys: ppvar-sys-regulator { >>>> + compatible = "regulator-fixed"; >>>> + regulator-name = "ppvar_sys"; >>>> + regulator-always-on; >>>> + regulator-boot-on; >>>> + }; >>>> + >>>> + vph_pwr: vph-pwr-regulator { >>>> + compatible = "regulator-fixed"; >>>> + regulator-name = "vph_pwr"; >>>> + regulator-min-microvolt = <3700000>; >>>> + regulator-max-microvolt = <3700000>; >>>> + >>>> + regulator-always-on; >>>> + regulator-boot-on; >>>> + >>>> + vin-supply = <&ppvar_sys>; >>>> + }; >>>> +}; >>>> + >>>> +&apps_rsc { >>>> + regulators { >>>> + compatible = "qcom,pm8150-rpmh-regulators"; >>>> + qcom,pmic-id = "a"; >>>> + >>>> + vdd-s1-supply = <&vph_pwr>; >>>> + vdd-s2-supply = <&vph_pwr>; >>>> + vdd-s3-supply = <&vph_pwr>; >>>> + vdd-s4-supply = <&vph_pwr>; >>>> + vdd-s5-supply = <&vph_pwr>; >>>> + vdd-s6-supply = <&vph_pwr>; >>>> + vdd-s7-supply = <&vph_pwr>; >>>> + vdd-s8-supply = <&vph_pwr>; >>>> + vdd-s9-supply = <&vph_pwr>; >>>> + vdd-s10-supply = <&vph_pwr>; >>>> + >>>> + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; >>>> + vdd-l2-l10-supply = <&vph_pwr>; >>>> + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>; >>>> + vdd-l6-l9-supply = <&vreg_s6a_0p9>; >>>> + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>; >>>> + vdd-l13-l16-l17-supply = <&vph_pwr>; >>>> + >>>> + vreg_s2a_0p5: smps2 { >>>> + regulator-name = "vreg_s2a_0p5"; >>>> + regulator-min-microvolt = <320000>; >>>> + regulator-max-microvolt = <570000>; >>>> + }; >>>> + >>>> + vreg_s3a_1p05: smps3 { >>>> + regulator-name = "vreg_s3a_1p05"; >>>> + regulator-min-microvolt = <950000>; >>>> + regulator-max-microvolt = <1170000>; >>>> + }; >>>> + >>>> + vreg_s4a_1p8: smps4 { >>>> + regulator-name = "vreg_s4a_1p8"; >>>> + regulator-min-microvolt = <1800000>; >>>> + regulator-max-microvolt = <1800000>; >>>> + }; >>>> + >>>> + vreg_s5a_2p0: smps5 { >>>> + regulator-name = "vreg_s5a_2p0"; >>>> + regulator-min-microvolt = <1904000>; >>>> + regulator-max-microvolt = <2000000>; >>>> + }; >>>> + >>>> + vreg_s6a_0p9: smps6 { >>>> + regulator-name = "vreg_s6a_0p9"; >>>> + regulator-min-microvolt = <920000>; >>>> + regulator-max-microvolt = <1128000>; >>>> + }; >>>> + >>>> + vreg_s7a_1p2: smps7 { >>>> + regulator-name = "vreg_s7a_1p2"; >>>> + regulator-min-microvolt = <1200000>; >>>> + regulator-max-microvolt = <1200000>; >>>> + }; >>>> + >>>> + vreg_s8a_1p3: smps8 { >>>> + regulator-name = "vreg_s8a_1p3"; >>>> + regulator-min-microvolt = <1352000>; >>>> + regulator-max-microvolt = <1352000>; >>>> + }; >>>> + >>>> + vreg_l1a_0p91: ldo1 { >>>> + regulator-name = "vreg_l1a_0p91"; >>>> + regulator-min-microvolt = <312000>; >>>> + regulator-max-microvolt = <1304000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l2a_2p3: ldo2 { >>>> + regulator-name = "vreg_l2a_2p3"; >>>> + regulator-min-microvolt = <2970000>; >>>> + regulator-max-microvolt = <3300000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l3a_1p2: ldo3 { >>>> + regulator-name = "vreg_l3a_1p2"; >>>> + regulator-min-microvolt = <920000>; >>>> + regulator-max-microvolt = <1260000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l5a_0p8: ldo5 { >>>> + regulator-name = "vreg_l5a_0p8"; >>>> + regulator-min-microvolt = <312000>; >>>> + regulator-max-microvolt = <1304000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l6a_0p91: ldo6 { >>>> + regulator-name = "vreg_l6a_0p91"; >>>> + regulator-min-microvolt = <880000>; >>>> + regulator-max-microvolt = <950000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l7a_1p8: ldo7 { >>>> + regulator-name = "vreg_l7a_1p8"; >>>> + regulator-min-microvolt = <1650000>; >>>> + regulator-max-microvolt = <2000000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + >>>> + }; >>>> + >>>> + vreg_l8a_0p91: ldo8 { >>>> + regulator-name = "vreg_l8a_0p91"; >>>> + regulator-min-microvolt = <888000>; >>>> + regulator-max-microvolt = <925000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l9a_0p91: ldo9 { >>>> + regulator-name = "vreg_l8a_0p91"; >>>> + regulator-min-microvolt = <312000>; >>>> + regulator-max-microvolt = <1304000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l10a_2p95: ldo10 { >>>> + regulator-name = "vreg_l10a_2p95"; >>>> + regulator-min-microvolt = <2700000>; >>>> + regulator-max-microvolt = <3544000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l11a_0p91: ldo11 { >>>> + regulator-name = "vreg_l11a_0p91"; >>>> + regulator-min-microvolt = <800000>; >>>> + regulator-max-microvolt = <1000000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l12a_1p8: ldo12 { >>>> + regulator-name = "vreg_l12a_1p8"; >>>> + regulator-min-microvolt = <1504000>; >>>> + regulator-max-microvolt = <1504000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l14a_1p8: ldo14 { >>>> + regulator-name = "vreg_l14a_1p8"; >>>> + regulator-min-microvolt = <1650000>; >>>> + regulator-max-microvolt = <1950000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l15a_1p8: ldo15 { >>>> + regulator-name = "vreg_l15a_1p8"; >>>> + regulator-min-microvolt = <1504000>; >>>> + regulator-max-microvolt = <2000000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l16a_1p8: ldo16 { >>>> + regulator-name = "vreg_l16a_1p8"; >>>> + regulator-min-microvolt = <1710000>; >>>> + regulator-max-microvolt = <1890000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l17a_3p3: ldo17 { >>>> + regulator-name = "vreg_l17a_3p3"; >>>> + regulator-min-microvolt = <3000000>; >>>> + regulator-max-microvolt = <3544000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + >>>> + vreg_l18a_1p2: ldo18 { >>>> + regulator-name = "vreg_l18a_1p2"; >>>> + regulator-min-microvolt = <312000>; >>>> + regulator-max-microvolt = <1304000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >>>> + }; >>>> + }; >>>> +}; >>>> + >>>> +&qupv3_id_0 { >>>> + status = "okay"; >>>> +}; >>>> + >>>> +&uart7 { >>>> + status = "okay"; >>>> +};
On Fri, Nov 18, 2022 at 11:22:41AM -0800, Melody Olvera wrote: > Add DTs for Qualcomm IDP platforms using the QDU1000 and QRU1000 > SoCs. > > Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 2 + > arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 266 +++++++++++++++++++++++ > arch/arm64/boot/dts/qcom/qru1000-idp.dts | 266 +++++++++++++++++++++++ > 3 files changed, 534 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/qdu1000-idp.dts > create mode 100644 arch/arm64/boot/dts/qcom/qru1000-idp.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index afe496a93f94..da66d4a0a884 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -53,7 +53,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb > +dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb > dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb > +dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb > diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts > new file mode 100644 > index 000000000000..5aed483201fa > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts > @@ -0,0 +1,266 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > +#include "qdu1000.dtsi" > +#include "pm8150.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. QDU1000 IDP"; > + compatible = "qcom,qdu1000-idp", "qcom,qdu1000"; > + > + aliases { > + serial0 = &uart7; > + }; > + > + clocks { > + xo_board: xo-board { Please add a -clk suffix to the node name. > + compatible = "fixed-clock"; > + clock-frequency = <19200000>; > + clock-output-names = "xo_board"; Nothing should rely on this name, so please don't specify it. > + #clock-cells = <0>; > + }; > + > + sleep_clk: sleep-clk { > + compatible = "fixed-clock"; > + clock-frequency = <32000>; > + #clock-cells = <0>; > + }; > + > + pcie_0_pipe_clk: pcie-0-pipe-clk { Afaict these clocks are not referenced anywhere, so please skip them. > + compatible = "fixed-clock"; > + clock-frequency = <1000>; > + clock-output-names = "pcie_0_pipe_clk"; > + #clock-cells = <0>; > + }; > + > + pcie_0_phy_aux_clk: pcie-0-phy-aux-clk { > + compatible = "fixed-clock"; > + clock-frequency = <1000>; > + clock-output-names = "pcie_0_phy_aux_clk"; > + #clock-cells = <0>; > + }; > + > + usb3_phy_wrapper_pipe_clk: usb3-phy-wrapper-pipe-clk { > + compatible = "fixed-clock"; > + clock-frequency = <1000>; > + clock-output-names = "usb3_phy_wrapper_pipe_clk"; > + #clock-cells = <0>; > + }; > + }; > + > + chosen { "ch" < "cl", so please move this up. > + stdout-path = "serial0:115200n8"; > + }; > + > + ppvar_sys: ppvar-sys-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "ppvar_sys"; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + vph_pwr: vph-pwr-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vph_pwr"; > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + > + regulator-always-on; > + regulator-boot-on; > + > + vin-supply = <&ppvar_sys>; > + }; > +}; > + > +&apps_rsc { > + regulators { Seems like this is supposed to match -regulators$, so how about pm8150-regulators? Regards, Bjorn > + compatible = "qcom,pm8150-rpmh-regulators"; > + qcom,pmic-id = "a"; > + > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vph_pwr>; > + vdd-s3-supply = <&vph_pwr>; > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + vdd-s6-supply = <&vph_pwr>; > + vdd-s7-supply = <&vph_pwr>; > + vdd-s8-supply = <&vph_pwr>; > + vdd-s9-supply = <&vph_pwr>; > + vdd-s10-supply = <&vph_pwr>; > + > + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; > + vdd-l2-l10-supply = <&vph_pwr>; > + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>; > + vdd-l6-l9-supply = <&vreg_s6a_0p9>; > + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>; > + vdd-l13-l16-l17-supply = <&vph_pwr>; > + > + vreg_s2a_0p5: smps2 { > + regulator-name = "vreg_s2a_0p5"; > + regulator-min-microvolt = <320000>; > + regulator-max-microvolt = <570000>; > + }; > + > + vreg_s3a_1p05: smps3 { > + regulator-name = "vreg_s3a_1p05"; > + regulator-min-microvolt = <950000>; > + regulator-max-microvolt = <1170000>; > + }; > + > + vreg_s4a_1p8: smps4 { > + regulator-name = "vreg_s4a_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + vreg_s5a_2p0: smps5 { > + regulator-name = "vreg_s5a_2p0"; > + regulator-min-microvolt = <1904000>; > + regulator-max-microvolt = <2000000>; > + }; > + > + vreg_s6a_0p9: smps6 { > + regulator-name = "vreg_s6a_0p9"; > + regulator-min-microvolt = <920000>; > + regulator-max-microvolt = <1128000>; > + }; > + > + vreg_s7a_1p2: smps7 { > + regulator-name = "vreg_s7a_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + }; > + > + vreg_s8a_1p3: smps8 { > + regulator-name = "vreg_s8a_1p3"; > + regulator-min-microvolt = <1352000>; > + regulator-max-microvolt = <1352000>; > + }; > + > + vreg_l1a_0p91: ldo1 { > + regulator-name = "vreg_l1a_0p91"; > + regulator-min-microvolt = <312000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l2a_2p3: ldo2 { > + regulator-name = "vreg_l2a_2p3"; > + regulator-min-microvolt = <2970000>; > + regulator-max-microvolt = <3300000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l3a_1p2: ldo3 { > + regulator-name = "vreg_l3a_1p2"; > + regulator-min-microvolt = <920000>; > + regulator-max-microvolt = <1260000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l5a_0p8: ldo5 { > + regulator-name = "vreg_l5a_0p8"; > + regulator-min-microvolt = <312000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l6a_0p91: ldo6 { > + regulator-name = "vreg_l6a_0p91"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <950000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l7a_1p8: ldo7 { > + regulator-name = "vreg_l7a_1p8"; > + regulator-min-microvolt = <1650000>; > + regulator-max-microvolt = <2000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + > + }; > + > + vreg_l8a_0p91: ldo8 { > + regulator-name = "vreg_l8a_0p91"; > + regulator-min-microvolt = <888000>; > + regulator-max-microvolt = <925000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l9a_0p91: ldo9 { > + regulator-name = "vreg_l8a_0p91"; > + regulator-min-microvolt = <312000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l10a_2p95: ldo10 { > + regulator-name = "vreg_l10a_2p95"; > + regulator-min-microvolt = <2700000>; > + regulator-max-microvolt = <3544000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l11a_0p91: ldo11 { > + regulator-name = "vreg_l11a_0p91"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l12a_1p8: ldo12 { > + regulator-name = "vreg_l12a_1p8"; > + regulator-min-microvolt = <1504000>; > + regulator-max-microvolt = <1504000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l14a_1p8: ldo14 { > + regulator-name = "vreg_l14a_1p8"; > + regulator-min-microvolt = <1650000>; > + regulator-max-microvolt = <1950000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l15a_1p8: ldo15 { > + regulator-name = "vreg_l15a_1p8"; > + regulator-min-microvolt = <1504000>; > + regulator-max-microvolt = <2000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l16a_1p8: ldo16 { > + regulator-name = "vreg_l16a_1p8"; > + regulator-min-microvolt = <1710000>; > + regulator-max-microvolt = <1890000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l17a_3p3: ldo17 { > + regulator-name = "vreg_l17a_3p3"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3544000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l18a_1p2: ldo18 { > + regulator-name = "vreg_l18a_1p2"; > + regulator-min-microvolt = <312000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + }; > +}; > + > +&qupv3_id_0 { > + status = "okay"; > +}; > + > +&uart7 { > + status = "okay"; > +}; > diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts > new file mode 100644 > index 000000000000..42eb0c33e7ba > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts > @@ -0,0 +1,266 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > +#include "qru1000.dtsi" > +#include "pm8150.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. QRU1000 IDP"; > + compatible = "qcom,qru1000-idp", "qcom,qru1000"; > + > + aliases { > + serial0 = &uart7; > + }; > + > + clocks { > + xo_board: xo-board { > + compatible = "fixed-clock"; > + clock-frequency = <19200000>; > + clock-output-names = "xo_board"; > + #clock-cells = <0>; > + }; > + > + sleep_clk: sleep-clk { > + compatible = "fixed-clock"; > + clock-frequency = <32000>; > + #clock-cells = <0>; > + }; > + > + pcie_0_pipe_clk: pcie-0-pipe-clk { > + compatible = "fixed-clock"; > + clock-frequency = <1000>; > + clock-output-names = "pcie_0_pipe_clk"; > + #clock-cells = <0>; > + }; > + > + pcie_0_phy_aux_clk: pcie-0-phy-aux-clk { > + compatible = "fixed-clock"; > + clock-frequency = <1000>; > + clock-output-names = "pcie_0_phy_aux_clk"; > + #clock-cells = <0>; > + }; > + > + usb3_phy_wrapper_pipe_clk: usb3-phy-wrapper-pipe-clk { > + compatible = "fixed-clock"; > + clock-frequency = <1000>; > + clock-output-names = "usb3_phy_wrapper_pipe_clk"; > + #clock-cells = <0>; > + }; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + ppvar_sys: ppvar-sys-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "ppvar_sys"; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + vph_pwr: vph-pwr-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vph_pwr"; > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + > + regulator-always-on; > + regulator-boot-on; > + > + vin-supply = <&ppvar_sys>; > + }; > +}; > + > +&apps_rsc { > + regulators { > + compatible = "qcom,pm8150-rpmh-regulators"; > + qcom,pmic-id = "a"; > + > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vph_pwr>; > + vdd-s3-supply = <&vph_pwr>; > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + vdd-s6-supply = <&vph_pwr>; > + vdd-s7-supply = <&vph_pwr>; > + vdd-s8-supply = <&vph_pwr>; > + vdd-s9-supply = <&vph_pwr>; > + vdd-s10-supply = <&vph_pwr>; > + > + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; > + vdd-l2-l10-supply = <&vph_pwr>; > + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>; > + vdd-l6-l9-supply = <&vreg_s6a_0p9>; > + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>; > + vdd-l13-l16-l17-supply = <&vph_pwr>; > + > + vreg_s2a_0p5: smps2 { > + regulator-name = "vreg_s2a_0p5"; > + regulator-min-microvolt = <320000>; > + regulator-max-microvolt = <570000>; > + }; > + > + vreg_s3a_1p05: smps3 { > + regulator-name = "vreg_s3a_1p05"; > + regulator-min-microvolt = <950000>; > + regulator-max-microvolt = <1170000>; > + }; > + > + vreg_s4a_1p8: smps4 { > + regulator-name = "vreg_s4a_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + vreg_s5a_2p0: smps5 { > + regulator-name = "vreg_s5a_2p0"; > + regulator-min-microvolt = <1904000>; > + regulator-max-microvolt = <2000000>; > + }; > + > + vreg_s6a_0p9: smps6 { > + regulator-name = "vreg_s6a_0p9"; > + regulator-min-microvolt = <920000>; > + regulator-max-microvolt = <1128000>; > + }; > + > + vreg_s7a_1p2: smps7 { > + regulator-name = "vreg_s7a_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + }; > + > + vreg_s8a_1p3: smps8 { > + regulator-name = "vreg_s8a_1p3"; > + regulator-min-microvolt = <1352000>; > + regulator-max-microvolt = <1352000>; > + }; > + > + vreg_l1a_0p91: ldo1 { > + regulator-name = "vreg_l1a_0p91"; > + regulator-min-microvolt = <312000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l2a_2p3: ldo2 { > + regulator-name = "vreg_l2a_2p3"; > + regulator-min-microvolt = <2970000>; > + regulator-max-microvolt = <3300000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l3a_1p2: ldo3 { > + regulator-name = "vreg_l3a_1p2"; > + regulator-min-microvolt = <920000>; > + regulator-max-microvolt = <1260000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l5a_0p8: ldo5 { > + regulator-name = "vreg_l5a_0p8"; > + regulator-min-microvolt = <312000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l6a_0p91: ldo6 { > + regulator-name = "vreg_l6a_0p91"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <950000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l7a_1p8: ldo7 { > + regulator-name = "vreg_l7a_1p8"; > + regulator-min-microvolt = <1650000>; > + regulator-max-microvolt = <2000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + > + }; > + > + vreg_l8a_0p91: ldo8 { > + regulator-name = "vreg_l8a_0p91"; > + regulator-min-microvolt = <888000>; > + regulator-max-microvolt = <925000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l9a_0p91: ldo9 { > + regulator-name = "vreg_l8a_0p91"; > + regulator-min-microvolt = <312000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l10a_2p95: ldo10 { > + regulator-name = "vreg_l10a_2p95"; > + regulator-min-microvolt = <2700000>; > + regulator-max-microvolt = <3544000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l11a_0p91: ldo11 { > + regulator-name = "vreg_l11a_0p91"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l12a_1p8: ldo12 { > + regulator-name = "vreg_l12a_1p8"; > + regulator-min-microvolt = <1504000>; > + regulator-max-microvolt = <1504000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l14a_1p8: ldo14 { > + regulator-name = "vreg_l14a_1p8"; > + regulator-min-microvolt = <1650000>; > + regulator-max-microvolt = <1950000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l15a_1p8: ldo15 { > + regulator-name = "vreg_l15a_1p8"; > + regulator-min-microvolt = <1504000>; > + regulator-max-microvolt = <2000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l16a_1p8: ldo16 { > + regulator-name = "vreg_l16a_1p8"; > + regulator-min-microvolt = <1710000>; > + regulator-max-microvolt = <1890000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l17a_3p3: ldo17 { > + regulator-name = "vreg_l17a_3p3"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3544000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l18a_1p2: ldo18 { > + regulator-name = "vreg_l18a_1p2"; > + regulator-min-microvolt = <312000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + }; > +}; > + > +&qupv3_id_0 { > + status = "okay"; > +}; > + > +&uart7 { > + status = "okay"; > +}; > -- > 2.38.1 >
On 02/12/2022 04:37, Bjorn Andersson wrote: > On Fri, Nov 18, 2022 at 11:22:41AM -0800, Melody Olvera wrote: >> Add DTs for Qualcomm IDP platforms using the QDU1000 and QRU1000 >> SoCs. >> >> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> >> --- (...) >> + vph_pwr: vph-pwr-regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "vph_pwr"; >> + regulator-min-microvolt = <3700000>; >> + regulator-max-microvolt = <3700000>; >> + >> + regulator-always-on; >> + regulator-boot-on; >> + >> + vin-supply = <&ppvar_sys>; >> + }; >> +}; >> + >> +&apps_rsc { >> + regulators { > > Seems like this is supposed to match -regulators$, so how about > pm8150-regulators? No, it's correct as model numbers should not be used for node names. https://lore.kernel.org/linux-devicetree/20220926092104.111449-1-krzysztof.kozlowski@linaro.org/ https://lore.kernel.org/all/d13d5638-67b1-218b-c16d-505a389ccc42@quicinc.com/ Best regards, Krzysztof
On 12/1/2022 7:37 PM, Bjorn Andersson wrote: > On Fri, Nov 18, 2022 at 11:22:41AM -0800, Melody Olvera wrote: >> Add DTs for Qualcomm IDP platforms using the QDU1000 and QRU1000 >> SoCs. >> >> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> >> --- >> arch/arm64/boot/dts/qcom/Makefile | 2 + >> arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 266 +++++++++++++++++++++++ >> arch/arm64/boot/dts/qcom/qru1000-idp.dts | 266 +++++++++++++++++++++++ >> 3 files changed, 534 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/qdu1000-idp.dts >> create mode 100644 arch/arm64/boot/dts/qcom/qru1000-idp.dts >> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >> index afe496a93f94..da66d4a0a884 100644 >> --- a/arch/arm64/boot/dts/qcom/Makefile >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -53,7 +53,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb >> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb >> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb >> +dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb >> dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb >> +dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb >> diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts >> new file mode 100644 >> index 000000000000..5aed483201fa >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts >> @@ -0,0 +1,266 @@ >> +// SPDX-License-Identifier: BSD-3-Clause >> +/* >> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. >> + */ >> + >> +/dts-v1/; >> + >> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> >> +#include "qdu1000.dtsi" >> +#include "pm8150.dtsi" >> + >> +/ { >> + model = "Qualcomm Technologies, Inc. QDU1000 IDP"; >> + compatible = "qcom,qdu1000-idp", "qcom,qdu1000"; >> + >> + aliases { >> + serial0 = &uart7; >> + }; >> + >> + clocks { >> + xo_board: xo-board { > Please add a -clk suffix to the node name. Sure thing. > >> + compatible = "fixed-clock"; >> + clock-frequency = <19200000>; >> + clock-output-names = "xo_board"; > Nothing should rely on this name, so please don't specify it. Ok; will remove clk names. > >> + #clock-cells = <0>; >> + }; >> + >> + sleep_clk: sleep-clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <32000>; >> + #clock-cells = <0>; >> + }; >> + >> + pcie_0_pipe_clk: pcie-0-pipe-clk { > Afaict these clocks are not referenced anywhere, so please skip them. Yes, so I included them to be consistent with the bindings. They will be needed later; should I still remove? > >> + compatible = "fixed-clock"; >> + clock-frequency = <1000>; >> + clock-output-names = "pcie_0_pipe_clk"; >> + #clock-cells = <0>; >> + }; >> + >> + pcie_0_phy_aux_clk: pcie-0-phy-aux-clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <1000>; >> + clock-output-names = "pcie_0_phy_aux_clk"; >> + #clock-cells = <0>; >> + }; >> + >> + usb3_phy_wrapper_pipe_clk: usb3-phy-wrapper-pipe-clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <1000>; >> + clock-output-names = "usb3_phy_wrapper_pipe_clk"; >> + #clock-cells = <0>; >> + }; >> + }; >> + >> + chosen { > "ch" < "cl", so please move this up. My bad; will do. Thanks, Melody >> + stdout-path = "serial0:115200n8"; >> + }; >> + >> + ppvar_sys: ppvar-sys-regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "ppvar_sys"; >> + regulator-always-on; >> + regulator-boot-on; >> + }; >> + >> + vph_pwr: vph-pwr-regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "vph_pwr"; >> + regulator-min-microvolt = <3700000>; >> + regulator-max-microvolt = <3700000>; >> + >> + regulator-always-on; >> + regulator-boot-on; >> + >> + vin-supply = <&ppvar_sys>; >> + }; >> +}; >> + >> +&apps_rsc { >> + regulators { > Seems like this is supposed to match -regulators$, so how about > pm8150-regulators? > > Regards, > Bjorn > >> + compatible = "qcom,pm8150-rpmh-regulators"; >> + qcom,pmic-id = "a"; >> + >> + vdd-s1-supply = <&vph_pwr>; >> + vdd-s2-supply = <&vph_pwr>; >> + vdd-s3-supply = <&vph_pwr>; >> + vdd-s4-supply = <&vph_pwr>; >> + vdd-s5-supply = <&vph_pwr>; >> + vdd-s6-supply = <&vph_pwr>; >> + vdd-s7-supply = <&vph_pwr>; >> + vdd-s8-supply = <&vph_pwr>; >> + vdd-s9-supply = <&vph_pwr>; >> + vdd-s10-supply = <&vph_pwr>; >> + >> + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; >> + vdd-l2-l10-supply = <&vph_pwr>; >> + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>; >> + vdd-l6-l9-supply = <&vreg_s6a_0p9>; >> + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>; >> + vdd-l13-l16-l17-supply = <&vph_pwr>; >> + >> + vreg_s2a_0p5: smps2 { >> + regulator-name = "vreg_s2a_0p5"; >> + regulator-min-microvolt = <320000>; >> + regulator-max-microvolt = <570000>; >> + }; >> + >> + vreg_s3a_1p05: smps3 { >> + regulator-name = "vreg_s3a_1p05"; >> + regulator-min-microvolt = <950000>; >> + regulator-max-microvolt = <1170000>; >> + }; >> + >> + vreg_s4a_1p8: smps4 { >> + regulator-name = "vreg_s4a_1p8"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + }; >> + >> + vreg_s5a_2p0: smps5 { >> + regulator-name = "vreg_s5a_2p0"; >> + regulator-min-microvolt = <1904000>; >> + regulator-max-microvolt = <2000000>; >> + }; >> + >> + vreg_s6a_0p9: smps6 { >> + regulator-name = "vreg_s6a_0p9"; >> + regulator-min-microvolt = <920000>; >> + regulator-max-microvolt = <1128000>; >> + }; >> + >> + vreg_s7a_1p2: smps7 { >> + regulator-name = "vreg_s7a_1p2"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1200000>; >> + }; >> + >> + vreg_s8a_1p3: smps8 { >> + regulator-name = "vreg_s8a_1p3"; >> + regulator-min-microvolt = <1352000>; >> + regulator-max-microvolt = <1352000>; >> + }; >> + >> + vreg_l1a_0p91: ldo1 { >> + regulator-name = "vreg_l1a_0p91"; >> + regulator-min-microvolt = <312000>; >> + regulator-max-microvolt = <1304000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l2a_2p3: ldo2 { >> + regulator-name = "vreg_l2a_2p3"; >> + regulator-min-microvolt = <2970000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l3a_1p2: ldo3 { >> + regulator-name = "vreg_l3a_1p2"; >> + regulator-min-microvolt = <920000>; >> + regulator-max-microvolt = <1260000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l5a_0p8: ldo5 { >> + regulator-name = "vreg_l5a_0p8"; >> + regulator-min-microvolt = <312000>; >> + regulator-max-microvolt = <1304000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l6a_0p91: ldo6 { >> + regulator-name = "vreg_l6a_0p91"; >> + regulator-min-microvolt = <880000>; >> + regulator-max-microvolt = <950000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l7a_1p8: ldo7 { >> + regulator-name = "vreg_l7a_1p8"; >> + regulator-min-microvolt = <1650000>; >> + regulator-max-microvolt = <2000000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + >> + }; >> + >> + vreg_l8a_0p91: ldo8 { >> + regulator-name = "vreg_l8a_0p91"; >> + regulator-min-microvolt = <888000>; >> + regulator-max-microvolt = <925000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l9a_0p91: ldo9 { >> + regulator-name = "vreg_l8a_0p91"; >> + regulator-min-microvolt = <312000>; >> + regulator-max-microvolt = <1304000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l10a_2p95: ldo10 { >> + regulator-name = "vreg_l10a_2p95"; >> + regulator-min-microvolt = <2700000>; >> + regulator-max-microvolt = <3544000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l11a_0p91: ldo11 { >> + regulator-name = "vreg_l11a_0p91"; >> + regulator-min-microvolt = <800000>; >> + regulator-max-microvolt = <1000000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l12a_1p8: ldo12 { >> + regulator-name = "vreg_l12a_1p8"; >> + regulator-min-microvolt = <1504000>; >> + regulator-max-microvolt = <1504000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l14a_1p8: ldo14 { >> + regulator-name = "vreg_l14a_1p8"; >> + regulator-min-microvolt = <1650000>; >> + regulator-max-microvolt = <1950000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l15a_1p8: ldo15 { >> + regulator-name = "vreg_l15a_1p8"; >> + regulator-min-microvolt = <1504000>; >> + regulator-max-microvolt = <2000000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l16a_1p8: ldo16 { >> + regulator-name = "vreg_l16a_1p8"; >> + regulator-min-microvolt = <1710000>; >> + regulator-max-microvolt = <1890000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l17a_3p3: ldo17 { >> + regulator-name = "vreg_l17a_3p3"; >> + regulator-min-microvolt = <3000000>; >> + regulator-max-microvolt = <3544000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l18a_1p2: ldo18 { >> + regulator-name = "vreg_l18a_1p2"; >> + regulator-min-microvolt = <312000>; >> + regulator-max-microvolt = <1304000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + }; >> +}; >> + >> +&qupv3_id_0 { >> + status = "okay"; >> +}; >> + >> +&uart7 { >> + status = "okay"; >> +}; >> diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts >> new file mode 100644 >> index 000000000000..42eb0c33e7ba >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts >> @@ -0,0 +1,266 @@ >> +// SPDX-License-Identifier: BSD-3-Clause >> +/* >> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. >> + */ >> + >> +/dts-v1/; >> + >> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> >> +#include "qru1000.dtsi" >> +#include "pm8150.dtsi" >> + >> +/ { >> + model = "Qualcomm Technologies, Inc. QRU1000 IDP"; >> + compatible = "qcom,qru1000-idp", "qcom,qru1000"; >> + >> + aliases { >> + serial0 = &uart7; >> + }; >> + >> + clocks { >> + xo_board: xo-board { >> + compatible = "fixed-clock"; >> + clock-frequency = <19200000>; >> + clock-output-names = "xo_board"; >> + #clock-cells = <0>; >> + }; >> + >> + sleep_clk: sleep-clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <32000>; >> + #clock-cells = <0>; >> + }; >> + >> + pcie_0_pipe_clk: pcie-0-pipe-clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <1000>; >> + clock-output-names = "pcie_0_pipe_clk"; >> + #clock-cells = <0>; >> + }; >> + >> + pcie_0_phy_aux_clk: pcie-0-phy-aux-clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <1000>; >> + clock-output-names = "pcie_0_phy_aux_clk"; >> + #clock-cells = <0>; >> + }; >> + >> + usb3_phy_wrapper_pipe_clk: usb3-phy-wrapper-pipe-clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <1000>; >> + clock-output-names = "usb3_phy_wrapper_pipe_clk"; >> + #clock-cells = <0>; >> + }; >> + }; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> + >> + ppvar_sys: ppvar-sys-regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "ppvar_sys"; >> + regulator-always-on; >> + regulator-boot-on; >> + }; >> + >> + vph_pwr: vph-pwr-regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "vph_pwr"; >> + regulator-min-microvolt = <3700000>; >> + regulator-max-microvolt = <3700000>; >> + >> + regulator-always-on; >> + regulator-boot-on; >> + >> + vin-supply = <&ppvar_sys>; >> + }; >> +}; >> + >> +&apps_rsc { >> + regulators { >> + compatible = "qcom,pm8150-rpmh-regulators"; >> + qcom,pmic-id = "a"; >> + >> + vdd-s1-supply = <&vph_pwr>; >> + vdd-s2-supply = <&vph_pwr>; >> + vdd-s3-supply = <&vph_pwr>; >> + vdd-s4-supply = <&vph_pwr>; >> + vdd-s5-supply = <&vph_pwr>; >> + vdd-s6-supply = <&vph_pwr>; >> + vdd-s7-supply = <&vph_pwr>; >> + vdd-s8-supply = <&vph_pwr>; >> + vdd-s9-supply = <&vph_pwr>; >> + vdd-s10-supply = <&vph_pwr>; >> + >> + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; >> + vdd-l2-l10-supply = <&vph_pwr>; >> + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>; >> + vdd-l6-l9-supply = <&vreg_s6a_0p9>; >> + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>; >> + vdd-l13-l16-l17-supply = <&vph_pwr>; >> + >> + vreg_s2a_0p5: smps2 { >> + regulator-name = "vreg_s2a_0p5"; >> + regulator-min-microvolt = <320000>; >> + regulator-max-microvolt = <570000>; >> + }; >> + >> + vreg_s3a_1p05: smps3 { >> + regulator-name = "vreg_s3a_1p05"; >> + regulator-min-microvolt = <950000>; >> + regulator-max-microvolt = <1170000>; >> + }; >> + >> + vreg_s4a_1p8: smps4 { >> + regulator-name = "vreg_s4a_1p8"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + }; >> + >> + vreg_s5a_2p0: smps5 { >> + regulator-name = "vreg_s5a_2p0"; >> + regulator-min-microvolt = <1904000>; >> + regulator-max-microvolt = <2000000>; >> + }; >> + >> + vreg_s6a_0p9: smps6 { >> + regulator-name = "vreg_s6a_0p9"; >> + regulator-min-microvolt = <920000>; >> + regulator-max-microvolt = <1128000>; >> + }; >> + >> + vreg_s7a_1p2: smps7 { >> + regulator-name = "vreg_s7a_1p2"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1200000>; >> + }; >> + >> + vreg_s8a_1p3: smps8 { >> + regulator-name = "vreg_s8a_1p3"; >> + regulator-min-microvolt = <1352000>; >> + regulator-max-microvolt = <1352000>; >> + }; >> + >> + vreg_l1a_0p91: ldo1 { >> + regulator-name = "vreg_l1a_0p91"; >> + regulator-min-microvolt = <312000>; >> + regulator-max-microvolt = <1304000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l2a_2p3: ldo2 { >> + regulator-name = "vreg_l2a_2p3"; >> + regulator-min-microvolt = <2970000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l3a_1p2: ldo3 { >> + regulator-name = "vreg_l3a_1p2"; >> + regulator-min-microvolt = <920000>; >> + regulator-max-microvolt = <1260000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l5a_0p8: ldo5 { >> + regulator-name = "vreg_l5a_0p8"; >> + regulator-min-microvolt = <312000>; >> + regulator-max-microvolt = <1304000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l6a_0p91: ldo6 { >> + regulator-name = "vreg_l6a_0p91"; >> + regulator-min-microvolt = <880000>; >> + regulator-max-microvolt = <950000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l7a_1p8: ldo7 { >> + regulator-name = "vreg_l7a_1p8"; >> + regulator-min-microvolt = <1650000>; >> + regulator-max-microvolt = <2000000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + >> + }; >> + >> + vreg_l8a_0p91: ldo8 { >> + regulator-name = "vreg_l8a_0p91"; >> + regulator-min-microvolt = <888000>; >> + regulator-max-microvolt = <925000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l9a_0p91: ldo9 { >> + regulator-name = "vreg_l8a_0p91"; >> + regulator-min-microvolt = <312000>; >> + regulator-max-microvolt = <1304000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l10a_2p95: ldo10 { >> + regulator-name = "vreg_l10a_2p95"; >> + regulator-min-microvolt = <2700000>; >> + regulator-max-microvolt = <3544000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l11a_0p91: ldo11 { >> + regulator-name = "vreg_l11a_0p91"; >> + regulator-min-microvolt = <800000>; >> + regulator-max-microvolt = <1000000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l12a_1p8: ldo12 { >> + regulator-name = "vreg_l12a_1p8"; >> + regulator-min-microvolt = <1504000>; >> + regulator-max-microvolt = <1504000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l14a_1p8: ldo14 { >> + regulator-name = "vreg_l14a_1p8"; >> + regulator-min-microvolt = <1650000>; >> + regulator-max-microvolt = <1950000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l15a_1p8: ldo15 { >> + regulator-name = "vreg_l15a_1p8"; >> + regulator-min-microvolt = <1504000>; >> + regulator-max-microvolt = <2000000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l16a_1p8: ldo16 { >> + regulator-name = "vreg_l16a_1p8"; >> + regulator-min-microvolt = <1710000>; >> + regulator-max-microvolt = <1890000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l17a_3p3: ldo17 { >> + regulator-name = "vreg_l17a_3p3"; >> + regulator-min-microvolt = <3000000>; >> + regulator-max-microvolt = <3544000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + >> + vreg_l18a_1p2: ldo18 { >> + regulator-name = "vreg_l18a_1p2"; >> + regulator-min-microvolt = <312000>; >> + regulator-max-microvolt = <1304000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; >> + }; >> + }; >> +}; >> + >> +&qupv3_id_0 { >> + status = "okay"; >> +}; >> + >> +&uart7 { >> + status = "okay"; >> +}; >> -- >> 2.38.1 >>
On 14/12/2022 19:59, Melody Olvera wrote: > >> >>> + #clock-cells = <0>; >>> + }; >>> + >>> + sleep_clk: sleep-clk { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <32000>; >>> + #clock-cells = <0>; >>> + }; >>> + >>> + pcie_0_pipe_clk: pcie-0-pipe-clk { >> Afaict these clocks are not referenced anywhere, so please skip them. > > Yes, so I included them to be consistent with the bindings. They will be needed later; > should I still remove? > If they are not referenced anywhere, how is it consistent with bindings? Where do the bindings require defining such nodes? Best regards, Krzysztof
On 22/11/2022 00:15, Melody Olvera wrote: > > > On 11/21/2022 5:07 AM, Konrad Dybcio wrote: >> >> On 18.11.2022 20:22, Melody Olvera wrote: >>> Add DTs for Qualcomm IDP platforms using the QDU1000 and QRU1000 >>> SoCs. >>> >>> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> >>> --- >>> arch/arm64/boot/dts/qcom/Makefile | 2 + >>> arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 266 +++++++++++++++++++++++ >>> arch/arm64/boot/dts/qcom/qru1000-idp.dts | 266 +++++++++++++++++++++++ >>> 3 files changed, 534 insertions(+) >>> create mode 100644 arch/arm64/boot/dts/qcom/qdu1000-idp.dts >>> create mode 100644 arch/arm64/boot/dts/qcom/qru1000-idp.dts >>> >>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >>> index afe496a93f94..da66d4a0a884 100644 >>> --- a/arch/arm64/boot/dts/qcom/Makefile >>> +++ b/arch/arm64/boot/dts/qcom/Makefile >>> @@ -53,7 +53,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb >>> +dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb >>> +dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb >>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts >>> new file mode 100644 >>> index 000000000000..5aed483201fa >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts >>> @@ -0,0 +1,266 @@ >>> +// SPDX-License-Identifier: BSD-3-Clause >>> +/* >>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. >>> + */ >>> + >>> +/dts-v1/; >>> + >>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> >>> +#include "qdu1000.dtsi" >>> +#include "pm8150.dtsi" >>> + >>> +/ { >>> + model = "Qualcomm Technologies, Inc. QDU1000 IDP"; >>> + compatible = "qcom,qdu1000-idp", "qcom,qdu1000"; >> Missing chassis-type > > Sorry, not sure what you mean here... Do you mean like QRD, HDK, MTP, etc.? > If so, then IDP is the chassis type. > >> >>> + >>> + aliases { >>> + serial0 = &uart7; >>> + }; >>> + >>> + clocks { >>> + xo_board: xo-board { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <19200000>; >>> + clock-output-names = "xo_board"; >>> + #clock-cells = <0>; >>> + }; >>> + >>> + sleep_clk: sleep-clk { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <32000>; >>> + #clock-cells = <0>; >>> + }; >>> + >>> + pcie_0_pipe_clk: pcie-0-pipe-clk { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <1000>; >>> + clock-output-names = "pcie_0_pipe_clk"; >>> + #clock-cells = <0>; >>> + }; >>> + >>> + pcie_0_phy_aux_clk: pcie-0-phy-aux-clk { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <1000>; >>> + clock-output-names = "pcie_0_phy_aux_clk"; >>> + #clock-cells = <0>; >>> + }; >>> + >>> + usb3_phy_wrapper_pipe_clk: usb3-phy-wrapper-pipe-clk { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <1000>; >>> + clock-output-names = "usb3_phy_wrapper_pipe_clk"; >>> + #clock-cells = <0>; >>> + }; >> Do these pipe clocks not come from QMPPHY? > > Yes they do; I just don't have those phys ready yet. I can put a TODO here to > move them if necessary. Just use <0> instead of adding a dummy fixed clock.
On 12/15/2022 12:44 AM, Krzysztof Kozlowski wrote: > On 14/12/2022 19:59, Melody Olvera wrote: >>>> + #clock-cells = <0>; >>>> + }; >>>> + >>>> + sleep_clk: sleep-clk { >>>> + compatible = "fixed-clock"; >>>> + clock-frequency = <32000>; >>>> + #clock-cells = <0>; >>>> + }; >>>> + >>>> + pcie_0_pipe_clk: pcie-0-pipe-clk { >>> Afaict these clocks are not referenced anywhere, so please skip them. >> Yes, so I included them to be consistent with the bindings. They will be needed later; >> should I still remove? >> > If they are not referenced anywhere, how is it consistent with bindings? > Where do the bindings require defining such nodes? These bindings here: https://lore.kernel.org/all/20221118181826.28269-2-quic_molvera@quicinc.com/ I believe you commented that we either have these clocks or we don't, correct? I added them to the dt since these clocks exist and will be needed later when USB and PCIE nodes are added. As Konrad noted, these technically belong in the PHYs, but I was told to put stub fixed clocks instead here: https://lore.kernel.org/lkml/2c8c4642-8aee-3da3-7698-5e08b4c5894d@linaro.org/ How is this to be handled? Should I remove the clocks from the dt and the bindings and add them later when we need them? Do I leave stub clocks here with frequency 0 until needed? I am very confused right now. Thanks, Melody > > Best regards, > Krzysztof >
On 15/12/2022 19:56, Melody Olvera wrote: > > > On 12/15/2022 12:44 AM, Krzysztof Kozlowski wrote: >> On 14/12/2022 19:59, Melody Olvera wrote: >>>>> + #clock-cells = <0>; >>>>> + }; >>>>> + >>>>> + sleep_clk: sleep-clk { >>>>> + compatible = "fixed-clock"; >>>>> + clock-frequency = <32000>; >>>>> + #clock-cells = <0>; >>>>> + }; >>>>> + >>>>> + pcie_0_pipe_clk: pcie-0-pipe-clk { >>>> Afaict these clocks are not referenced anywhere, so please skip them. >>> Yes, so I included them to be consistent with the bindings. They will be needed later; >>> should I still remove? >>> >> If they are not referenced anywhere, how is it consistent with bindings? >> Where do the bindings require defining such nodes? > > These bindings here: https://lore.kernel.org/all/20221118181826.28269-2-quic_molvera@quicinc.com/ > I believe you commented that we either have these clocks or we don't, correct? I added them to > the dt since these clocks exist and will be needed later when USB and PCIE nodes are added. > As Konrad noted, these technically belong in the PHYs, but I was told to put stub fixed > clocks instead here: https://lore.kernel.org/lkml/2c8c4642-8aee-3da3-7698-5e08b4c5894d@linaro.org/ > > How is this to be handled? Should I remove the clocks from the dt and the bindings and add them > later when we need them? Do I leave stub clocks here with frequency 0 until needed? I am > very confused right now. You were told to use stub clocks in the bindings, not in the dtsi file. You can use <0> in the dtsi instead. > > Thanks, > Melody > >> >> Best regards, >> Krzysztof >> >
On 12/15/2022 10:47 AM, Dmitry Baryshkov wrote: > On 15/12/2022 19:56, Melody Olvera wrote: >> >> >> On 12/15/2022 12:44 AM, Krzysztof Kozlowski wrote: >>> On 14/12/2022 19:59, Melody Olvera wrote: >>>>>> + #clock-cells = <0>; >>>>>> + }; >>>>>> + >>>>>> + sleep_clk: sleep-clk { >>>>>> + compatible = "fixed-clock"; >>>>>> + clock-frequency = <32000>; >>>>>> + #clock-cells = <0>; >>>>>> + }; >>>>>> + >>>>>> + pcie_0_pipe_clk: pcie-0-pipe-clk { >>>>> Afaict these clocks are not referenced anywhere, so please skip them. >>>> Yes, so I included them to be consistent with the bindings. They will be needed later; >>>> should I still remove? >>>> >>> If they are not referenced anywhere, how is it consistent with bindings? >>> Where do the bindings require defining such nodes? >> >> These bindings here: https://lore.kernel.org/all/20221118181826.28269-2-quic_molvera@quicinc.com/ >> I believe you commented that we either have these clocks or we don't, correct? I added them to >> the dt since these clocks exist and will be needed later when USB and PCIE nodes are added. >> As Konrad noted, these technically belong in the PHYs, but I was told to put stub fixed >> clocks instead here: https://lore.kernel.org/lkml/2c8c4642-8aee-3da3-7698-5e08b4c5894d@linaro.org/ >> >> How is this to be handled? Should I remove the clocks from the dt and the bindings and add them >> later when we need them? Do I leave stub clocks here with frequency 0 until needed? I am >> very confused right now. > > You were told to use stub clocks in the bindings, not in the dtsi file. You can use <0> in the dtsi instead. Oh ok that makes more sense. I appreciate the clarification. Thanks, Melody > >> >> Thanks, >> Melody >> >>> >>> Best regards, >>> Krzysztof >>> >> >
On 15/12/2022 18:56, Melody Olvera wrote: > > > On 12/15/2022 12:44 AM, Krzysztof Kozlowski wrote: >> On 14/12/2022 19:59, Melody Olvera wrote: >>>>> + #clock-cells = <0>; >>>>> + }; >>>>> + >>>>> + sleep_clk: sleep-clk { >>>>> + compatible = "fixed-clock"; >>>>> + clock-frequency = <32000>; >>>>> + #clock-cells = <0>; >>>>> + }; >>>>> + >>>>> + pcie_0_pipe_clk: pcie-0-pipe-clk { >>>> Afaict these clocks are not referenced anywhere, so please skip them. >>> Yes, so I included them to be consistent with the bindings. They will be needed later; >>> should I still remove? >>> >> If they are not referenced anywhere, how is it consistent with bindings? >> Where do the bindings require defining such nodes? > > These bindings here: https://lore.kernel.org/all/20221118181826.28269-2-quic_molvera@quicinc.com/ > I believe you commented that we either have these clocks or we don't, correct? I added them to > the dt since these clocks exist and will be needed later when USB and PCIE nodes are added. > As Konrad noted, these technically belong in the PHYs, but I was told to put stub fixed > clocks instead here: https://lore.kernel.org/lkml/2c8c4642-8aee-3da3-7698-5e08b4c5894d@linaro.org/ > > How is this to be handled? Should I remove the clocks from the dt and the bindings and add them This was a discussion about clock controller. You either have these clocks as input of the clock controller or not. If you have - drop minItems. If you do not have - trim the list to just two items. What do you actually write in DTS is of course connected with the bindings but separate problem. I was not referring to what should be or should not be in DTS. We talked about clock controller and its inputs. Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index afe496a93f94..da66d4a0a884 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -53,7 +53,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb +dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb +dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts new file mode 100644 index 000000000000..5aed483201fa --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "qdu1000.dtsi" +#include "pm8150.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. QDU1000 IDP"; + compatible = "qcom,qdu1000-idp", "qcom,qdu1000"; + + aliases { + serial0 = &uart7; + }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + clock-frequency = <19200000>; + clock-output-names = "xo_board"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + + pcie_0_pipe_clk: pcie-0-pipe-clk { + compatible = "fixed-clock"; + clock-frequency = <1000>; + clock-output-names = "pcie_0_pipe_clk"; + #clock-cells = <0>; + }; + + pcie_0_phy_aux_clk: pcie-0-phy-aux-clk { + compatible = "fixed-clock"; + clock-frequency = <1000>; + clock-output-names = "pcie_0_phy_aux_clk"; + #clock-cells = <0>; + }; + + usb3_phy_wrapper_pipe_clk: usb3-phy-wrapper-pipe-clk { + compatible = "fixed-clock"; + clock-frequency = <1000>; + clock-output-names = "usb3_phy_wrapper_pipe_clk"; + #clock-cells = <0>; + }; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + ppvar_sys: ppvar-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&ppvar_sys>; + }; +}; + +&apps_rsc { + regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vph_pwr>; + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>; + vdd-l6-l9-supply = <&vreg_s6a_0p9>; + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>; + vdd-l13-l16-l17-supply = <&vph_pwr>; + + vreg_s2a_0p5: smps2 { + regulator-name = "vreg_s2a_0p5"; + regulator-min-microvolt = <320000>; + regulator-max-microvolt = <570000>; + }; + + vreg_s3a_1p05: smps3 { + regulator-name = "vreg_s3a_1p05"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1170000>; + }; + + vreg_s4a_1p8: smps4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s5a_2p0: smps5 { + regulator-name = "vreg_s5a_2p0"; + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6a_0p9: smps6 { + regulator-name = "vreg_s6a_0p9"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_s7a_1p2: smps7 { + regulator-name = "vreg_s7a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_s8a_1p3: smps8 { + regulator-name = "vreg_s8a_1p3"; + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l1a_0p91: ldo1 { + regulator-name = "vreg_l1a_0p91"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l2a_2p3: ldo2 { + regulator-name = "vreg_l2a_2p3"; + regulator-min-microvolt = <2970000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l3a_1p2: ldo3 { + regulator-name = "vreg_l3a_1p2"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5a_0p8: ldo5 { + regulator-name = "vreg_l5a_0p8"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l6a_0p91: ldo6 { + regulator-name = "vreg_l6a_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-name = "vreg_l7a_1p8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + + }; + + vreg_l8a_0p91: ldo8 { + regulator-name = "vreg_l8a_0p91"; + regulator-min-microvolt = <888000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l9a_0p91: ldo9 { + regulator-name = "vreg_l8a_0p91"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l10a_2p95: ldo10 { + regulator-name = "vreg_l10a_2p95"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l11a_0p91: ldo11 { + regulator-name = "vreg_l11a_0p91"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l16a_1p8: ldo16 { + regulator-name = "vreg_l16a_1p8"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l17a_3p3: ldo17 { + regulator-name = "vreg_l17a_3p3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l18a_1p2: ldo18 { + regulator-name = "vreg_l18a_1p2"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&uart7 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts new file mode 100644 index 000000000000..42eb0c33e7ba --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "qru1000.dtsi" +#include "pm8150.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. QRU1000 IDP"; + compatible = "qcom,qru1000-idp", "qcom,qru1000"; + + aliases { + serial0 = &uart7; + }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + clock-frequency = <19200000>; + clock-output-names = "xo_board"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + + pcie_0_pipe_clk: pcie-0-pipe-clk { + compatible = "fixed-clock"; + clock-frequency = <1000>; + clock-output-names = "pcie_0_pipe_clk"; + #clock-cells = <0>; + }; + + pcie_0_phy_aux_clk: pcie-0-phy-aux-clk { + compatible = "fixed-clock"; + clock-frequency = <1000>; + clock-output-names = "pcie_0_phy_aux_clk"; + #clock-cells = <0>; + }; + + usb3_phy_wrapper_pipe_clk: usb3-phy-wrapper-pipe-clk { + compatible = "fixed-clock"; + clock-frequency = <1000>; + clock-output-names = "usb3_phy_wrapper_pipe_clk"; + #clock-cells = <0>; + }; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + ppvar_sys: ppvar-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&ppvar_sys>; + }; +}; + +&apps_rsc { + regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vph_pwr>; + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>; + vdd-l6-l9-supply = <&vreg_s6a_0p9>; + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>; + vdd-l13-l16-l17-supply = <&vph_pwr>; + + vreg_s2a_0p5: smps2 { + regulator-name = "vreg_s2a_0p5"; + regulator-min-microvolt = <320000>; + regulator-max-microvolt = <570000>; + }; + + vreg_s3a_1p05: smps3 { + regulator-name = "vreg_s3a_1p05"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1170000>; + }; + + vreg_s4a_1p8: smps4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s5a_2p0: smps5 { + regulator-name = "vreg_s5a_2p0"; + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6a_0p9: smps6 { + regulator-name = "vreg_s6a_0p9"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_s7a_1p2: smps7 { + regulator-name = "vreg_s7a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_s8a_1p3: smps8 { + regulator-name = "vreg_s8a_1p3"; + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l1a_0p91: ldo1 { + regulator-name = "vreg_l1a_0p91"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l2a_2p3: ldo2 { + regulator-name = "vreg_l2a_2p3"; + regulator-min-microvolt = <2970000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l3a_1p2: ldo3 { + regulator-name = "vreg_l3a_1p2"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5a_0p8: ldo5 { + regulator-name = "vreg_l5a_0p8"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l6a_0p91: ldo6 { + regulator-name = "vreg_l6a_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-name = "vreg_l7a_1p8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + + }; + + vreg_l8a_0p91: ldo8 { + regulator-name = "vreg_l8a_0p91"; + regulator-min-microvolt = <888000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l9a_0p91: ldo9 { + regulator-name = "vreg_l8a_0p91"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l10a_2p95: ldo10 { + regulator-name = "vreg_l10a_2p95"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l11a_0p91: ldo11 { + regulator-name = "vreg_l11a_0p91"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l16a_1p8: ldo16 { + regulator-name = "vreg_l16a_1p8"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l17a_3p3: ldo17 { + regulator-name = "vreg_l17a_3p3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l18a_1p2: ldo18 { + regulator-name = "vreg_l18a_1p2"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&uart7 { + status = "okay"; +};
Add DTs for Qualcomm IDP platforms using the QDU1000 and QRU1000 SoCs. Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> --- arch/arm64/boot/dts/qcom/Makefile | 2 + arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 266 +++++++++++++++++++++++ arch/arm64/boot/dts/qcom/qru1000-idp.dts | 266 +++++++++++++++++++++++ 3 files changed, 534 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/qdu1000-idp.dts create mode 100644 arch/arm64/boot/dts/qcom/qru1000-idp.dts