diff mbox series

[2/3] net: phy: dp83867: add LED mode configuration via dt

Message ID 20221118001548.635752-3-tharvey@gateworks.com
State New
Headers show
Series None | expand

Commit Message

Tim Harvey Nov. 18, 2022, 12:15 a.m. UTC 
Add configuration of LED modes per device-tree property ti,led-modes.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
 drivers/net/phy/dp83867.c | 32 ++++++++++++++++++++++++++++++--
 1 file changed, 30 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index 6939563d3b7c..008941a8d6aa 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -26,6 +26,7 @@ 
 #define MII_DP83867_MICR	0x12
 #define MII_DP83867_ISR		0x13
 #define DP83867_CFG2		0x14
+#define DP83867_LEDCR1		0x18
 #define DP83867_CFG3		0x1e
 #define DP83867_CTRL		0x1f
 
@@ -150,6 +151,10 @@ 
 /* FLD_THR_CFG */
 #define DP83867_FLD_THR_CFG_ENERGY_LOST_THR_MASK	0x7
 
+/* LED Configuration 1 bits */
+#define DP83867_LED_MODE_SHIFT			4
+#define DP83867_LED_MODE_MASK			0xf
+
 enum {
 	DP83867_PORT_MIRROING_KEEP,
 	DP83867_PORT_MIRROING_EN,
@@ -167,6 +172,7 @@  struct dp83867_private {
 	bool set_clk_output;
 	u32 clk_output_sel;
 	bool sgmii_ref_clk_en;
+	int led_modes[4];
 };
 
 static int dp83867_ack_interrupt(struct phy_device *phydev)
@@ -573,7 +579,7 @@  static int dp83867_of_init(struct phy_device *phydev)
 	struct dp83867_private *dp83867 = phydev->priv;
 	struct device *dev = &phydev->mdio.dev;
 	struct device_node *of_node = dev->of_node;
-	int ret;
+	int ret, led;
 
 	if (!of_node)
 		return -ENODEV;
@@ -658,6 +664,13 @@  static int dp83867_of_init(struct phy_device *phydev)
 		return -EINVAL;
 	}
 
+	if (of_property_read_u32_array(of_node, "ti,led-modes",
+				       dp83867->led_modes,
+				       ARRAY_SIZE(dp83867->led_modes))) {
+		for (led = 0; led < ARRAY_SIZE(dp83867->led_modes); led++)
+			dp83867->led_modes[led] = -EINVAL;
+	}
+
 	return 0;
 }
 #else
@@ -665,6 +678,7 @@  static int dp83867_of_init(struct phy_device *phydev)
 {
 	struct dp83867_private *dp83867 = phydev->priv;
 	u16 delay;
+	int led;
 
 	/* For non-OF device, the RX and TX ID values are either strapped
 	 * or take from default value. So, we init RX & TX ID values here
@@ -682,6 +696,10 @@  static int dp83867_of_init(struct phy_device *phydev)
 	 */
 	dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN / 2;
 
+	/* LED mode unconfigured */
+	for (led = 0; led < ARRAY_SIZE(dp83867->led_modes); led++)
+		dp83867->led_modes[led] = -EINVAL;
+
 	return 0;
 }
 #endif /* CONFIG_OF_MDIO */
@@ -703,7 +721,7 @@  static int dp83867_probe(struct phy_device *phydev)
 static int dp83867_config_init(struct phy_device *phydev)
 {
 	struct dp83867_private *dp83867 = phydev->priv;
-	int ret, val, bs;
+	int ret, val, bs, led;
 	u16 delay;
 
 	/* Force speed optimization for the PHY even if it strapped */
@@ -882,6 +900,16 @@  static int dp83867_config_init(struct phy_device *phydev)
 			       mask, val);
 	}
 
+	/* LED Configuration */
+	val = phy_read(phydev, DP83867_LEDCR1);
+	for (led = 0; led < ARRAY_SIZE(dp83867->led_modes); led++) {
+		if (dp83867->led_modes[led] != -EINVAL) {
+			val &= ~(DP83867_LED_MODE_MASK << (DP83867_LED_MODE_SHIFT * led));
+			val |= (dp83867->led_modes[led] << (DP83867_LED_MODE_SHIFT * led));
+		}
+	}
+	phy_write(phydev, DP83867_LEDCR1, val);
+
 	return 0;
 }