| Message ID | 20221123104342.26140-3-srinivas.kandagatla@linaro.org |
|---|---|
| State | Accepted |
| Commit | c18773d162a63f65024e80ae355e3fbc923e7255 |
| Headers | show |
| Series | arm64: dts: qcom: sc8280xp: add audio support | expand |
On 23.11.2022 11:43, Srinivas Kandagatla wrote: > Add LPASS Codecs along with SoundWire controller for TX, RX, WSA and VA macros > along with LPASS LPI pinctrl node. > > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 320 +++++++++++++++++++++++++ > 1 file changed, 320 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > index e8b6f67b928e..c2e61c8db332 100644 > --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > @@ -12,6 +12,7 @@ > #include <dt-bindings/power/qcom-rpmpd.h> > #include <dt-bindings/soc/qcom,gpr.h> > #include <dt-bindings/soc/qcom,rpmh-rsc.h> > +#include <dt-bindings/sound/qcom,q6afe.h> > #include <dt-bindings/thermal/thermal.h> > > / { > @@ -1668,6 +1669,322 @@ q6prmcc: clock-controller { > }; > }; > > + rxmacro: rxmacro@3200000 { > + compatible = "qcom,sc8280xp-lpass-rx-macro"; > + reg = <0 0x03200000 0 0x1000>; > + clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, > + <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, > + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, > + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, > + <&vamacro>; > + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; > + assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, > + <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; > + assigned-clock-rates = <19200000>, <19200000>; > + > + clock-output-names = "mclk"; > + #clock-cells = <0>; > + #sound-dai-cells = <1>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&rx_swr_default>; > + }; > + > + /* RX */ > + swr1: soundwire-controller@3210000 { > + compatible = "qcom,soundwire-v1.6.0"; > + reg = <0 0x03210000 0 0x2000>; > + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&rxmacro>; > + clock-names = "iface"; > + label = "RX"; > + > + qcom,din-ports = <0>; > + qcom,dout-ports = <5>; > + > + qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>; > + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0B 0x01 0x00>; > + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0B 0x00 0x00>; > + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>; > + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>; > + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>; > + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>; > + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>; > + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>; > + > + #sound-dai-cells = <1>; > + #address-cells = <2>; > + #size-cells = <0>; > + }; > + > + txmacro: txmacro@3220000 { > + compatible = "qcom,sc8280xp-lpass-tx-macro"; > + reg = <0 0x03220000 0 0x1000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&tx_swr_default>; > + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, > + <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, > + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, > + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, > + <&vamacro>; > + > + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; > + assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, > + <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; > + assigned-clock-rates = <19200000>, <19200000>; > + clock-output-names = "mclk"; > + > + #clock-cells = <0>; > + #address-cells = <2>; > + #size-cells = <2>; > + #sound-dai-cells = <1>; > + }; > + > + wsamacro: codec@3240000 { > + compatible = "qcom,sc8280xp-lpass-wsa-macro"; > + reg = <0 0x03240000 0 0x1000>; > + clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, > + <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, > + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, > + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, > + <&vamacro>; > + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; > + assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, > + <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; > + assigned-clock-rates = <19200000>, <19200000>; > + > + #clock-cells = <0>; > + clock-output-names = "mclk"; > + #sound-dai-cells = <1>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&wsa_swr_default>; > + }; > + > + /* WSA */ > + swr0: soundwire-controller@3250000 { > + reg = <0 0x03250000 0 0x2000>; > + compatible = "qcom,soundwire-v1.6.0"; > + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&wsamacro>; > + clock-names = "iface"; > + > + qcom,din-ports = <2>; > + qcom,dout-ports = <6>; > + > + qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>; > + qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>; > + qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>; > + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; > + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; > + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; > + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>; > + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; > + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; > + > + #sound-dai-cells = <1>; > + #address-cells = <2>; > + #size-cells = <0>; > + }; > + > + /* TX */ > + swr2: soundwire-controller@3330000 { > + compatible = "qcom,soundwire-v1.6.0"; > + reg = <0 0x03330000 0 0x2000>; > + interrupts-extended = <&intc GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>, > + <&intc GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "core", "wake"; > + > + clocks = <&vamacro>; > + clock-names = "iface"; > + label = "TX"; > + #sound-dai-cells = <1>; > + #address-cells = <2>; > + #size-cells = <0>; > + > + qcom,din-ports = <4>; > + qcom,dout-ports = <0>; > + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x03 0x03 0x03>; > + qcom,ports-offset1 = /bits/ 8 <0x01 0x00 0x02 0x01>; > + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>; > + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>; > + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>; > + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>; > + qcom,ports-word-length = /bits/ 8 <0xff 0x00 0xff 0xff>; > + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>; > + qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00 0x00>; > + }; > + > + vamacro: codec@3370000 { > + compatible = "qcom,sc8280xp-lpass-va-macro"; > + reg = <0 0x03370000 0 0x1000>; > + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, > + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, > + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, > + <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; > + clock-names = "mclk", "macro", "dcodec", "npl"; > + assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; > + assigned-clock-rates = <19200000>; > + > + #clock-cells = <0>; > + clock-output-names = "fsgen"; > + #sound-dai-cells = <1>; > + }; > + > + lpass_tlmm: pinctrl@33c0000 { > + compatible = "qcom,sc8280xp-lpass-lpi-pinctrl"; > + reg = <0 0x33c0000 0x0 0x20000>, > + <0 0x3550000 0x0 0x10000>; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&lpass_tlmm 0 0 18>; > + > + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, > + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; > + clock-names = "core", "audio"; > + > + tx_swr_default: tx-swr-default-state { > + clk-pins { > + pins = "gpio0"; > + function = "swr_tx_clk"; > + drive-strength = <2>; > + slew-rate = <1>; > + bias-disable; > + }; > + > + data-pins { > + pins = "gpio1", "gpio2"; > + function = "swr_tx_data"; > + drive-strength = <2>; > + slew-rate = <1>; > + bias-bus-hold; > + }; > + }; > + > + rx_swr_default: rx-swr-default-state { > + clk-pins { > + pins = "gpio3"; > + function = "swr_rx_clk"; > + drive-strength = <2>; > + slew-rate = <1>; > + bias-disable; > + }; > + > + data-pins { > + pins = "gpio4", "gpio5"; > + function = "swr_rx_data"; > + drive-strength = <2>; > + slew-rate = <1>; > + bias-bus-hold; > + }; > + }; > + > + dmic01_default: dmic01-default-state { > + clk-pins { > + pins = "gpio6"; > + function = "dmic1_clk"; > + drive-strength = <8>; > + output-high; > + }; > + > + data-pins { > + pins = "gpio7"; > + function = "dmic1_data"; > + drive-strength = <8>; > + input-enable; > + }; > + }; > + > + dmic01_sleep: dmic01-sleep-state { > + clk-pins { > + pins = "gpio6"; > + function = "dmic1_clk"; > + drive-strength = <2>; > + bias-disable; > + output-low; > + }; > + > + data-pins { > + pins = "gpio7"; > + function = "dmic1_data"; > + drive-strength = <2>; > + bias-pull-down; > + input-enable; > + }; > + }; > + > + dmic02_default: dmic02-default-state { > + clk-pins { > + pins = "gpio8"; > + function = "dmic2_clk"; > + drive-strength = <8>; > + output-high; > + }; > + > + data-pins { > + pins = "gpio9"; > + function = "dmic2_data"; > + drive-strength = <8>; > + input-enable; > + }; > + }; > + > + dmic02_sleep: dmic02-sleep-state { > + clk-pins { > + pins = "gpio8"; > + function = "dmic2_clk"; > + drive-strength = <2>; > + bias-disable; > + output-low; > + }; > + > + data-pins { > + pins = "gpio9"; > + function = "dmic2_data"; > + drive-strength = <2>; > + bias-pull-down; > + input-enable; > + }; > + }; > + > + wsa_swr_default: wsa-swr-default-state { > + clk-pins { > + pins = "gpio10"; > + function = "wsa_swr_clk"; > + drive-strength = <2>; > + slew-rate = <1>; > + bias-disable; > + }; > + > + data-pins { > + pins = "gpio11"; > + function = "wsa_swr_data"; > + drive-strength = <2>; > + slew-rate = <1>; > + bias-bus-hold; > + > + }; > + }; > + > + wsa2_swr_default: wsa2-swr-default-state { > + clk-pins { > + pins = "gpio15"; > + function = "wsa2_swr_clk"; > + drive-strength = <2>; > + slew-rate = <1>; > + bias-disable; > + }; > + > + data-pins { > + pins = "gpio16"; > + function = "wsa2_swr_data"; > + drive-strength = <2>; > + slew-rate = <1>; > + bias-bus-hold; > + }; > + }; > + }; > + > usb_0_qmpphy: phy-wrapper@88ec000 { > compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; > reg = <0 0x088ec000 0 0x1e4>, > @@ -2507,6 +2824,9 @@ IPCC_MPROC_SIGNAL_GLINK_QMP > }; > }; > > + sound: sound { > + }; > + > thermal-zones { > cpu0-thermal { > polling-delay-passive = <250>;
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index e8b6f67b928e..c2e61c8db332 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,gpr.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/thermal/thermal.h> / { @@ -1668,6 +1669,322 @@ q6prmcc: clock-controller { }; }; + rxmacro: rxmacro@3200000 { + compatible = "qcom,sc8280xp-lpass-rx-macro"; + reg = <0 0x03200000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&vamacro>; + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>, <19200000>; + + clock-output-names = "mclk"; + #clock-cells = <0>; + #sound-dai-cells = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&rx_swr_default>; + }; + + /* RX */ + swr1: soundwire-controller@3210000 { + compatible = "qcom,soundwire-v1.6.0"; + reg = <0 0x03210000 0 0x2000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rxmacro>; + clock-names = "iface"; + label = "RX"; + + qcom,din-ports = <0>; + qcom,dout-ports = <5>; + + qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0B 0x01 0x00>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0B 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>; + + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + }; + + txmacro: txmacro@3220000 { + compatible = "qcom,sc8280xp-lpass-tx-macro"; + reg = <0 0x03220000 0 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&tx_swr_default>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&vamacro>; + + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>, <19200000>; + clock-output-names = "mclk"; + + #clock-cells = <0>; + #address-cells = <2>; + #size-cells = <2>; + #sound-dai-cells = <1>; + }; + + wsamacro: codec@3240000 { + compatible = "qcom,sc8280xp-lpass-wsa-macro"; + reg = <0 0x03240000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&vamacro>; + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>, <19200000>; + + #clock-cells = <0>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&wsa_swr_default>; + }; + + /* WSA */ + swr0: soundwire-controller@3250000 { + reg = <0 0x03250000 0 0x2000>; + compatible = "qcom,soundwire-v1.6.0"; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&wsamacro>; + clock-names = "iface"; + + qcom,din-ports = <2>; + qcom,dout-ports = <6>; + + qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + }; + + /* TX */ + swr2: soundwire-controller@3330000 { + compatible = "qcom,soundwire-v1.6.0"; + reg = <0 0x03330000 0 0x2000>; + interrupts-extended = <&intc GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "core", "wake"; + + clocks = <&vamacro>; + clock-names = "iface"; + label = "TX"; + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + + qcom,din-ports = <4>; + qcom,dout-ports = <0>; + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x03 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x00 0x02 0x01>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0x00 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00 0x00>; + }; + + vamacro: codec@3370000 { + compatible = "qcom,sc8280xp-lpass-va-macro"; + reg = <0 0x03370000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "mclk", "macro", "dcodec", "npl"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "fsgen"; + #sound-dai-cells = <1>; + }; + + lpass_tlmm: pinctrl@33c0000 { + compatible = "qcom,sc8280xp-lpass-lpi-pinctrl"; + reg = <0 0x33c0000 0x0 0x20000>, + <0 0x3550000 0x0 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 18>; + + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + tx_swr_default: tx-swr-default-state { + clk-pins { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio1", "gpio2"; + function = "swr_tx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + rx_swr_default: rx-swr-default-state { + clk-pins { + pins = "gpio3"; + function = "swr_rx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + dmic01_default: dmic01-default-state { + clk-pins { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <8>; + input-enable; + }; + }; + + dmic01_sleep: dmic01-sleep-state { + clk-pins { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + data-pins { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; + + dmic02_default: dmic02-default-state { + clk-pins { + pins = "gpio8"; + function = "dmic2_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio9"; + function = "dmic2_data"; + drive-strength = <8>; + input-enable; + }; + }; + + dmic02_sleep: dmic02-sleep-state { + clk-pins { + pins = "gpio8"; + function = "dmic2_clk"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + data-pins { + pins = "gpio9"; + function = "dmic2_data"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; + + wsa_swr_default: wsa-swr-default-state { + clk-pins { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + + }; + }; + + wsa2_swr_default: wsa2-swr-default-state { + clk-pins { + pins = "gpio15"; + function = "wsa2_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio16"; + function = "wsa2_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + }; + usb_0_qmpphy: phy-wrapper@88ec000 { compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; reg = <0 0x088ec000 0 0x1e4>, @@ -2507,6 +2824,9 @@ IPCC_MPROC_SIGNAL_GLINK_QMP }; }; + sound: sound { + }; + thermal-zones { cpu0-thermal { polling-delay-passive = <250>;