diff mbox series

[2/2] ARM: dts: sun8i: nanopi-duo2: Fix regulator GPIO reference

Message ID 20221125195401.61642-2-samuel@sholland.org
State Accepted
Commit 2177d4ae971f79b4a9a3c411f2fb8ae6113d1430
Headers show
Series None | expand

Commit Message

Samuel Holland Nov. 25, 2022, 7:54 p.m. UTC
The property named in the schema is 'enable-gpios', not 'enable-gpio'.
This makes no difference at runtime, because the regulator is marked as
always-on, but it breaks validation.

Fixes: 4701fc6e5dd9 ("ARM: dts: sun8i: add FriendlyARM NanoPi Duo2")
Signed-off-by: Samuel Holland <samuel@sholland.org>
---

 arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Jernej Škrabec Dec. 5, 2022, 9:03 p.m. UTC | #1
Dne petek, 25. november 2022 ob 20:54:01 CET je Samuel Holland napisal(a):
> The property named in the schema is 'enable-gpios', not 'enable-gpio'.
> This makes no difference at runtime, because the regulator is marked as
> always-on, but it breaks validation.
> 
> Fixes: 4701fc6e5dd9 ("ARM: dts: sun8i: add FriendlyARM NanoPi Duo2")
> Signed-off-by: Samuel Holland <samuel@sholland.org>

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
index 43641cb82398..343b02b97155 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
@@ -57,7 +57,7 @@  reg_vdd_cpux: vdd-cpux-regulator {
 		regulator-ramp-delay = <50>; /* 4ms */
 
 		enable-active-high;
-		enable-gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
 		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
 		gpios-states = <0x1>;
 		states = <1100000 0>, <1300000 1>;