@@ -7,9 +7,9 @@ ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += umc-ph1-ld4.o \
ddrphy-training.o ddrphy-ph1-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += umc-ph1-pro4.o \
- ddrphy-training.o ddrphy-ph1-pro4.o
+ ddrphy-training.o ddrphy-ph1-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += umc-ph1-sld8.o \
- ddrphy-training.o ddrphy-ph1-sld8.o
+ ddrphy-training.o ddrphy-ph1-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += umc-proxstream2.o
obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += umc-proxstream2.o
@@ -41,18 +41,12 @@ int ph1_ld4_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size,
writel(0x0000040B, &phy->dcr);
if (freq == 1333) {
writel(0x85589955, &phy->dtpr[0]);
- if (size == 1)
- writel(0x1a8253c0, &phy->dtpr[1]);
- else
- writel(0x1a8363c0, &phy->dtpr[1]);
+ writel(0x1a8363c0, &phy->dtpr[1]);
writel(0x5002c200, &phy->dtpr[2]);
writel(0x00000b51, &phy->mr0);
} else {
writel(0x999cbb66, &phy->dtpr[0]);
- if (size == 1)
- writel(0x1a82dbc0, &phy->dtpr[1]);
- else
- writel(0x1a878400, &phy->dtpr[1]);
+ writel(0x1a878400, &phy->dtpr[1]);
writel(0xa00214f8, &phy->dtpr[2]);
writel(0x00000d71, &phy->mr0);
}
deleted file mode 100644
@@ -1,68 +0,0 @@
-/*
- * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/types.h>
-#include <linux/io.h>
-
-#include "ddrphy-regs.h"
-
-int ph1_pro4_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size,
- bool ddr3plus)
-{
- u32 tmp;
-
- writel(0x0300c473, &phy->pgcr[1]);
- if (freq == 1333) {
- writel(0x0a806844, &phy->ptr[0]);
- writel(0x208e0124, &phy->ptr[1]);
- } else {
- writel(0x0c807d04, &phy->ptr[0]);
- writel(0x2710015E, &phy->ptr[1]);
- }
- writel(0x00083DEF, &phy->ptr[2]);
- if (freq == 1333) {
- writel(0x0f051616, &phy->ptr[3]);
- writel(0x06ae08d6, &phy->ptr[4]);
- } else {
- writel(0x12061A80, &phy->ptr[3]);
- writel(0x08027100, &phy->ptr[4]);
- }
- writel(0xF004001A, &phy->dsgcr);
-
- /* change the value of the on-die pull-up/pull-down registors */
- tmp = readl(&phy->dxccr);
- tmp &= ~0x0ee0;
- tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM;
- writel(tmp, &phy->dxccr);
-
- writel(0x0000040B, &phy->dcr);
- if (freq == 1333) {
- writel(0x85589955, &phy->dtpr[0]);
- writel(0x1a8363c0, &phy->dtpr[1]);
- writel(0x5002c200, &phy->dtpr[2]);
- writel(0x00000b51, &phy->mr0);
- } else {
- writel(0x999cbb66, &phy->dtpr[0]);
- writel(0x1a878400, &phy->dtpr[1]);
- writel(0xa00214f8, &phy->dtpr[2]);
- writel(0x00000d71, &phy->mr0);
- }
- writel(0x00000006, &phy->mr1);
- if (freq == 1333)
- writel(0x00000290, &phy->mr2);
- else
- writel(0x00000298, &phy->mr2);
-
- writel(ddr3plus ? 0x00000800 : 0x00000000, &phy->mr3);
-
- while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE))
- ;
-
- writel(0x0300C473, &phy->pgcr[1]);
- writel(0x0000005D, &phy->zq[0].cr[1]);
-
- return 0;
-}
deleted file mode 100644
@@ -1,75 +0,0 @@
-/*
- * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-#include <linux/types.h>
-#include <linux/io.h>
-
-#include "ddrphy-regs.h"
-
-int ph1_sld8_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size,
- bool ddr3plus)
-{
- u32 tmp;
-
- writel(0x0300c473, &phy->pgcr[1]);
- if (freq == 1333) {
- writel(0x0a806844, &phy->ptr[0]);
- writel(0x208e0124, &phy->ptr[1]);
- } else {
- writel(0x0c807d04, &phy->ptr[0]);
- writel(0x2710015E, &phy->ptr[1]);
- }
- writel(0x00083DEF, &phy->ptr[2]);
- if (freq == 1333) {
- writel(0x0f051616, &phy->ptr[3]);
- writel(0x06ae08d6, &phy->ptr[4]);
- } else {
- writel(0x12061A80, &phy->ptr[3]);
- writel(0x08027100, &phy->ptr[4]);
- }
- writel(0xF004001A, &phy->dsgcr);
-
- /* change the value of the on-die pull-up/pull-down registors */
- tmp = readl(&phy->dxccr);
- tmp &= ~0x0ee0;
- tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM;
- writel(tmp, &phy->dxccr);
-
- writel(0x0000040B, &phy->dcr);
- if (freq == 1333) {
- writel(0x85589955, &phy->dtpr[0]);
- if (size == 1)
- writel(0x1a8363c0, &phy->dtpr[1]);
- else
- writel(0x1a8363c0, &phy->dtpr[1]);
- writel(0x5002c200, &phy->dtpr[2]);
- writel(0x00000b51, &phy->mr0);
- } else {
- writel(0x999cbb66, &phy->dtpr[0]);
- if (size == 1)
- writel(0x1a878400, &phy->dtpr[1]);
- else
- writel(0x1a878400, &phy->dtpr[1]);
- writel(0xa00214f8, &phy->dtpr[2]);
- writel(0x00000d71, &phy->mr0);
- }
- writel(0x00000006, &phy->mr1);
- if (freq == 1333)
- writel(0x00000290, &phy->mr2);
- else
- writel(0x00000298, &phy->mr2);
-
- writel(ddr3plus ? 0x00000800 : 0x00000000, &phy->mr3);
-
- while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE))
- ;
-
- writel(0x0300C473, &phy->pgcr[1]);
- writel(0x0000005D, &phy->zq[0].cr[1]);
-
- return 0;
-}
@@ -172,10 +172,6 @@ struct ddrphy {
#ifndef __ASSEMBLY__
int ph1_ld4_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size,
bool ddr3plus);
-int ph1_pro4_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size,
- bool ddr3plus);
-int ph1_sld8_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size,
- bool ddr3plus);
void ddrphy_prepare_training(struct ddrphy __iomem *phy, int rank);
int ddrphy_training(struct ddrphy __iomem *phy);
#endif
@@ -138,32 +138,32 @@ int ph1_pro4_umc_init(const struct uniphier_board_data *bd)
writel(0x00000101, dramcont0 + UMC_DIOCTLA);
- ph1_pro4_ddrphy_init(phy0_0, bd->dram_freq, bd->dram_ch[0].size,
- bd->dram_ddr3plus);
+ ph1_ld4_ddrphy_init(phy0_0, bd->dram_freq, bd->dram_ch[0].size,
+ bd->dram_ddr3plus);
ddrphy_prepare_training(phy0_0, 0);
ddrphy_training(phy0_0);
writel(0x00000103, dramcont0 + UMC_DIOCTLA);
- ph1_pro4_ddrphy_init(phy0_1, bd->dram_freq, bd->dram_ch[0].size,
- bd->dram_ddr3plus);
+ ph1_ld4_ddrphy_init(phy0_1, bd->dram_freq, bd->dram_ch[0].size,
+ bd->dram_ddr3plus);
ddrphy_prepare_training(phy0_1, 1);
ddrphy_training(phy0_1);
writel(0x00000101, dramcont1 + UMC_DIOCTLA);
- ph1_pro4_ddrphy_init(phy1_0, bd->dram_freq, bd->dram_ch[1].size,
- bd->dram_ddr3plus);
+ ph1_ld4_ddrphy_init(phy1_0, bd->dram_freq, bd->dram_ch[1].size,
+ bd->dram_ddr3plus);
ddrphy_prepare_training(phy1_0, 0);
ddrphy_training(phy1_0);
writel(0x00000103, dramcont1 + UMC_DIOCTLA);
- ph1_pro4_ddrphy_init(phy1_1, bd->dram_freq, bd->dram_ch[1].size,
- bd->dram_ddr3plus);
+ ph1_ld4_ddrphy_init(phy1_1, bd->dram_freq, bd->dram_ch[1].size,
+ bd->dram_ddr3plus);
ddrphy_prepare_training(phy1_1, 1);
ddrphy_training(phy1_1);
@@ -97,14 +97,14 @@ static int umc_init_sub(int freq, int size_ch0, int size_ch1, bool ddr3plus)
writel(0x00000101, dramcont0 + UMC_DIOCTLA);
- ph1_sld8_ddrphy_init(phy0_0, freq, size_ch0, ddr3plus);
+ ph1_ld4_ddrphy_init(phy0_0, freq, size_ch0, ddr3plus);
ddrphy_prepare_training(phy0_0, 0);
ddrphy_training(phy0_0);
writel(0x00000101, dramcont1 + UMC_DIOCTLA);
- ph1_sld8_ddrphy_init(phy1_0, freq, size_ch1, ddr3plus);
+ ph1_ld4_ddrphy_init(phy1_0, freq, size_ch1, ddr3plus);
ddrphy_prepare_training(phy1_0, 1);
ddrphy_training(phy1_0);
Now these three are almost the same. The only difference is the DTPR1 register dependency on the DRAM size, but it can be ignored. (It has already been ignored in PH1-sLD8 and PH1-Pro4.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- arch/arm/mach-uniphier/dram/Makefile | 4 +- arch/arm/mach-uniphier/dram/ddrphy-ph1-ld4.c | 10 +--- arch/arm/mach-uniphier/dram/ddrphy-ph1-pro4.c | 68 ------------------------ arch/arm/mach-uniphier/dram/ddrphy-ph1-sld8.c | 75 --------------------------- arch/arm/mach-uniphier/dram/ddrphy-regs.h | 4 -- arch/arm/mach-uniphier/dram/umc-ph1-pro4.c | 16 +++--- arch/arm/mach-uniphier/dram/umc-ph1-sld8.c | 4 +- 7 files changed, 14 insertions(+), 167 deletions(-) delete mode 100644 arch/arm/mach-uniphier/dram/ddrphy-ph1-pro4.c delete mode 100644 arch/arm/mach-uniphier/dram/ddrphy-ph1-sld8.c -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot