diff mbox series

USB: serial: cp210x: add support for B0 hangup

Message ID 20221129141539.15176-1-johan@kernel.org
State New
Headers show
Series USB: serial: cp210x: add support for B0 hangup | expand

Commit Message

Johan Hovold Nov. 29, 2022, 2:15 p.m. UTC
A request to set the line speed to B0 is used to hang up a modem
connection by deasserting the modem control lines.

Note that there is no need reconfigure the line speed in hardware when
B0 is requested (even if some drivers do set it to an arbitrary value
for implementation or protocol reasons).

Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/cp210x.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

Comments

Alex Henrie Nov. 29, 2022, 5:48 p.m. UTC | #1
Reviewed-by: Alex Henrie <alexh@vpitech.com>
diff mbox series

Patch

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index f6fb23620e87..67372acc2352 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -1049,11 +1049,12 @@  static void cp210x_change_speed(struct tty_struct *tty,
 	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
 	u32 baud;
 
+	if (tty->termios.c_ospeed == 0)
+		return;
+
 	/*
 	 * This maps the requested rate to the actual rate, a valid rate on
 	 * cp2102 or cp2103, or to an arbitrary rate in [1M, max_speed].
-	 *
-	 * NOTE: B0 is not implemented.
 	 */
 	baud = clamp(tty->termios.c_ospeed, priv->min_speed, priv->max_speed);
 
@@ -1146,7 +1147,8 @@  static void cp210x_set_flow_control(struct tty_struct *tty,
 		tty->termios.c_iflag &= ~(IXON | IXOFF);
 	}
 
-	if (old_termios &&
+	if (tty->termios.c_ospeed != 0 &&
+			old_termios && old_termios->c_ospeed != 0 &&
 			C_CRTSCTS(tty) == (old_termios->c_cflag & CRTSCTS) &&
 			I_IXON(tty) == (old_termios->c_iflag & IXON) &&
 			I_IXOFF(tty) == (old_termios->c_iflag & IXOFF) &&
@@ -1171,6 +1173,14 @@  static void cp210x_set_flow_control(struct tty_struct *tty,
 
 	mutex_lock(&port_priv->mutex);
 
+	if (tty->termios.c_ospeed == 0) {
+		port_priv->dtr = false;
+		port_priv->rts = false;
+	} else if (old_termios && old_termios->c_ospeed == 0) {
+		port_priv->dtr = true;
+		port_priv->rts = true;
+	}
+
 	ret = cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl,
 			sizeof(flow_ctl));
 	if (ret)
@@ -1243,7 +1253,8 @@  static void cp210x_set_termios(struct tty_struct *tty,
 	u16 bits;
 	int ret;
 
-	if (old_termios && !cp210x_termios_change(&tty->termios, old_termios))
+	if (old_termios && !cp210x_termios_change(&tty->termios, old_termios) &&
+			tty->termios.c_ospeed != 0)
 		return;
 
 	if (!old_termios || tty->termios.c_ospeed != old_termios->c_ospeed)